hit counter script
D-Link DSL-2640R User Manual

D-Link DSL-2640R User Manual

Wireless adsl router
Hide thumbs Also See for DSL-2640R:
Table of Contents

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DSL-2640R

  • Page 2 FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
  • Page 3: Table Of Contents

    Information you will need from your ADSL service provider ......7 Advanced LAN QoS Setup ................. 37 Information you will need about DSL-2640R..........8 Advanced Wireless QoS Setup ..............38 Information you will need about your LAN or computer: ......9 ....................
  • Page 4: Package Contents

    Product Overview Package Contents • DSL-2640R Wireless ADSL Router • Power Adapter • CD-ROM with User Manual • One twisted-pair telephone cable used for ADSL connection • One straight-through Ethernet cable • One Quick Installation Guide Warning: The Router must be used with the power adapter included with the device.
  • Page 5: Features

    TCP/IP (Transfer Control Protocol/Internet Protocol) – The DSL-2640R supports TCP/IP protocol, the language used for the Internet. It is compatible with access servers manufactured by major vendors. • RIP-1/RIP-2 – The DSL-2640R supports both RIP-1 and RIP-2 exchanges with other routers. Using both versions lets the Router to communicate with all RIP enabled devices. •...
  • Page 6: Hardware Overview

    Use the Ethernet ports to connect the Use the adapter shipped with the To manually reset, depress button Router to a computer or an Ethernet LAN with the power on for about 6 to 8 Router to connect to power source seconds D-Link DSL-2640R User Manual...
  • Page 7: Leds

    A solid green light indicates a valid link on startup. This there is no DHCP response, no PPPoE response, PPPoE authentication has light will blink when there is activity currently passing failed, and/or there is no IP. through the Ethernet port. D-Link DSL-2640R User Manual...
  • Page 8: Installation

    Operating Systems The DSL-2640R uses an HTML-based web interface for setup and management. The web configuration manager may be accessed using any operating system capable of running web browser software, including Windows 98 SE, Windows ME, Windows 2000, Windows XP, and Windows Vista.
  • Page 9 Wireless ADSL Router. In addition the workstations must be configured to operate on the same channel and SSID as the Wireless ADSL Router. If wireless security is used, the wireless workstations must be properly configured for the security settings used. D-Link DSL-2640R User Manual...
  • Page 10: Information You Will Need From Your Adsl Service Provider

    If you are setting up the Router for multiple virtual connections, you will need to configure the VPI and VCI as instructed by your ADSL service provider for the additional connections. This setting can be changed in the WAN Settings window of the web management interface. D-Link DSL-2640R User Manual...
  • Page 11: Information You Will Need About Dsl-2640R

    LAN when DHCP is enabled. LAN Subnet Mask for the DSL-2640R This is the subnet mask used by the DSL-2640R, and will be used throughout your LAN. The default subnet mask is 255.255.255.0. This can be changed later. D-Link DSL-2640R User Manual...
  • Page 12: Information You Will Need About Your Lan Or Computer

    Ethernet NIC If your computer has an Ethernet NIC, you can connect the DSL-2640R to this Ethernet port using an Ethernet cable. You can also use the Ethernet ports on the DSL-2640R to connect to other computer or Ethernet devices.
  • Page 13: Power On Router

    Note: A factory reset will erase the current configuration settings and reset them to the default settings. After it has restarted, log in to the router’s web-based management interface and use the Setup Wizard to configure the basic settings. D-Link DSL-2640R User Manual...
  • Page 14: Network Connections

    SSID and channel. If wireless security is used, the wireless clients must be configured with the correct security information to use the Router. More information on configuring the wireless settings is found later in this manual. D-Link DSL-2640R User Manual...
  • Page 15: Setup

    Configuration Setup This section will show you how to set up and configure your new D-Link Router using the Web-based configuration utility. Web-based Configuration Utility Connect to the Router To configure the WAN connection used by the Router it is first necessary to communicate with the Router through its management interface, which is HTML-based and can be accessed using a web browser.
  • Page 16: Configure The Router

    The Setup Wizard allows you to configure the basic settings for the WAN (Internet) and Ethernet LAN (including DHCP) settings. To launch the Setup Wizard click on the Setup Wizard button. D-Link DSL-2640R User Manual...
  • Page 17: Adsl Setup - Setup Wizard

    The first menu of the Setup Wizard lists the basic steps in the process. These steps are as follows: 1. Change the router password. 2. Configure the connection to the Internet. 3. Finish. Click Next to continue. D-Link DSL-2640R User Manual...
  • Page 18: Setup Wizard Step 1 : Change Password

    Country from the pull-down menu. If you see your country listed, follow the instructions beginning on the next page. If you do not see your country listed, choose Others and click Next, skip ahead to Setup Wizard Step 2 : Internet Connection – Other Connection Types. D-Link DSL-2640R User Manual...
  • Page 19: Setup Wizard Step 2 : Internet Connection Type, Country And Isp

    ISP. If you are configuring a Bridged connection, the Wizard will go to the Finish menu. Many users will use a form of PPP connection. PPP connections require a Username and Password to establish the Internet connection. D-Link DSL-2640R User Manual...
  • Page 20: Setup Wizard Step 3 : Finish

    Configuration Setup Wizard Step 3 : Finish After configuring the connection as instructed by your ISP, the Router will need to be restarted. Click the Finish button to save the configuration and restart the Router. D-Link DSL-2640R User Manual...
  • Page 21: Setup Wizard Step 2 : Internet Connection - Other Connection Types

    Choosing the Others options will disable the VPI/VCI and Connection Type menus. Click Next to choose the type of connection used for your account. Select the connection type used by your ISP and click the Next button. D-Link DSL-2640R User Manual...
  • Page 22: Setup Wizard Step 2 : Internet Connection Type - Pppoe/Pppoa

    Some users may have to adjust the Connection Type from the drop-down menu. Click Next to go to the last Setup Wizard menu. Click the Finish button to save the configuration and restart the Router. D-Link DSL-2640R User Manual...
  • Page 23: Setup Wizard Step 2 : Internet Connection Type - Dynamic Ip Address

    Router to present to the ISP’s server used for DHCP. Click Next to go to the last Setup Wizard menu. Click the Finish button to save the configuration and restart the Router. D-Link DSL-2640R User Manual...
  • Page 24: Setup Wizard Step 2 : Internet Connection Type - Static Ip Address

    Most users will not need to change these settings. The Internet connection cannot function if these values are incorrect. Click Next to go to the last Setup Wizard menu. Click the Finish button to save the configuration and restart the Router. D-Link DSL-2640R User Manual...
  • Page 25: Setup Wizard Step 2 : Internet Connection Type - Bridge Mode

    Most users will not need to change these settings. The Internet connection cannot function if these values are incorrect. Click Next to go to the last Setup Wizard menu. Click the Finish button to save the configuration and restart the Router. D-Link DSL-2640R User Manual...
  • Page 26: Adsl Setup - Manual Configuration

    Setup directory. To access the ADSL Setup menus for PPPoE/PPPoA, Dynamic IP Address and Static IP Address connections, click on the ADSL Setup link button on the left side of the first menu that appears when you successfully access the web manager. D-Link DSL-2640R User Manual...
  • Page 27: Manual Adsl Setup - Pppoe/Pppoa

    Internet for your LAN. Whenever a computer on the LAN attempts to access the Internet, the Router becomes the Internet gateway to the computer. If you have an alternative route for Internet traffic you may disable this without effecting the Router’s connection. D-Link DSL-2640R User Manual...
  • Page 28: Manual Adsl Setup - Dynamic Ip Address

    Internet for your LAN. Whenever a computer on the LAN attempts to access the Internet, the Router becomes the Internet gateway to the computer. If you have an alternative route for Internet traffic you may disable this without effecting the Router’s connection. D-Link DSL-2640R User Manual...
  • Page 29: Manual Adsl Setup - Static Ip Address

    Internet for your LAN. Whenever a computer on the LAN attempts to access the Internet, the Router becomes the Internet gateway to the computer. If you have an alternative route for Internet traffic you may disable this without effecting the Router’s connection. D-Link DSL-2640R User Manual...
  • Page 30: Manual Adsl Setup - Bridge Mode

    Quick Start Wizard at any time by clicking the Exit button. If you exi he wizard you will return to the main Quick Start window without saving any of the settings changed during the process. D-Link DSL-2640R User Manual...
  • Page 31: Wireless Setup

    Type the name of the SSID used for your wireless network. Wireless devices that use the Router must have this SSID. The DSL-2640R also supports use of one additional SSID. For information on using and configuring a second SSID or Guest SSID, please see the Advanced Wireless section.
  • Page 32: Wireless Setup - Wep

    2. Choose the Default WEP Key of from those just entered, used as the active key. 3. Select an Authentication type, from the drop-down menu: Open or Shared Key or Shared Key. 4. Click Apply Settings to use the new WEP settings and restart the access point. D-Link DSL-2640R User Manual...
  • Page 33: Wireless Setup - Wpa

    2. Choose the Default WEP Key of from those just entered, used as the active key. 3. Type a Group Key Update Interval to configure the interval time between re-authorization in seconds. 4. Click Apply Settings to use the new WPA security settings and restart the access point. D-Link DSL-2640R User Manual...
  • Page 34: Lan Setup

    DHCP on the LAN will also be changed. The IP address pool can be up to 253 IP addresses. There are two options for DHCP service: • You can use the Router as a DHCP server for your LAN. • You can disable DHCP service and manually configure IP settings for workstations. D-Link DSL-2640R User Manual...
  • Page 35: Dhcp Server Configuration

    MAC address in the entry field provided. Type the MAC address using the standard format 00:00:00:00:00:00 and selecting an IP address within the subnet from the IP Address pull-down menu. Click the Save Settings button to create the static IP assignment. D-Link DSL-2640R User Manual...
  • Page 36: Time Setup

    The options for time and date configuration allow the administrator to maintain system time synchronized automatically with D-Link’s online time server (or an alternative NTP NTP server), use your computer’s system clock or set the time and date manually. If you opt to use and alternative NTP server, enter the SNTP server URL or IP address and click the Save Settings button to set the system time.
  • Page 37: Advanced Setup

    Advanced ADSL, Advanced Wireless, Advanced LAN, and Remote Management. Click the corresponding link in the left panel of the window. Port Forwarding is the first menu listed and the first to appear when accessing the Advanced directory. D-Link DSL-2640R User Manual...
  • Page 38: Port Forwarding

    Public Start Port and Public End Port fields, and then click the Add/Apply Settings button. Finally, click the Reboot button on the left panel to let your changes take effect. D-Link DSL-2640R User Manual...
  • Page 39: Qos Setup

    Basic QoS settings can be configured by checking any of the listed network applications and entering the ports (Start Port/End Port) used for the application. Click Save Settings to apply the QoS settings. D-Link DSL-2640R User Manual...
  • Page 40: Advanced Lan Qos Setup

    Type the source port or range and the destination port or range in the spaces provided. Where appropriate (for example ICMP), type a source and destination IP address or subnet. Click Add/Apply to create the rule. D-Link DSL-2640R User Manual...
  • Page 41: Advanced Wireless Qos Setup

    Protocol from the drop-down menu. Type the source port or range and the destination port or range in the spaces provided. Where appropriate (for example ICMP), type a source and destination IP address or subnet. Click Add/Apply to create the rule. D-Link DSL-2640R User Manual...
  • Page 42: Outbound Filter

    The new rule appears listed in the Active Outbound IP Filter list. A rule can be deleted by selecting the Remove option for the rule and clicking the Remove Selected button. D-Link DSL-2640R User Manual...
  • Page 43: Inbound Filter

    The new rule appears listed in the Active Inbound IP Filter list. A rule can be deleted by selecting the Remove option for the rule and clicking the Remove Selected button. D-Link DSL-2640R User Manual...
  • Page 44: Dns Setup

    Server Address from the list in the pull-down menu. Enter the Host Name of the LAN to be accessed, and the Username and Password for the DDNS account. Click the Apply Settings button to save changes made. D-Link DSL-2640R User Manual...
  • Page 45: Vlan Setup

    VLAN Group is enabled by default. VLAN Groups can be disabled without changing the previously configured VLAN arrangement. To disabled VLAN Groups click the Enable VLAN Group box to remove the check mark. Click the ADD/Apply to apply the settings. D-Link DSL-2640R User Manual...
  • Page 46: Dmz And Firewall Setup

    You can designate the server’s IP address as the DMZ by typing in the IP address in the DMZ IP Address space provided and then enabling its status by selecting the Enable DMZ option. Click the Apply Settings button at the top of the window when you are finished. D-Link DSL-2640R User Manual...
  • Page 47: Advanced Adsl

    ADSL modulation is ADSL2 or ADSL2+, these features will only be useful if supported by the ISP. If you opt to use either of these, some experimentation might be advisable to test ADSL synchronization and signal performance for improvement or degradation. D-Link DSL-2640R User Manual...
  • Page 48: Advanced Wireless

    (Max Clients) is 16. When User Isolation is On, Guest SSID member clients will be unable to transmit to other wireless clients, however they will have access to network resources through the Ethernet or Internet. Click on the Apply Settings button to save and apply the advanced wireless configuration. D-Link DSL-2640R User Manual...
  • Page 49: Wireless Mac Filter

    4. Click on the Apply Settings button. When activated the filter rule becomes effective immediately. The MAC filter rule can be deactivated by selecting the Deactivated option for Status. Deactivating MAC filters will not change any MAC addresses entered on the list. D-Link DSL-2640R User Manual...
  • Page 50: Advanced Lan

    Keep in mind that Internet radio and similar multicast services will not function if the Enable Multicast Streams option is not checked. Click on the Apply Settings button to save and apply the advanced LAN configuration. D-Link DSL-2640R User Manual...
  • Page 51: Remote Management

    Deny All with the Remote Admin Inbound Filter pull-down menu. Choose the services allowed from the LAN or WAN by checking the Enabled box for the service in the Remote Access Control list. Click the Apply Settings button to make the change. D-Link DSL-2640R User Manual...
  • Page 52: Maintenance

    Maintenance Maintenance Use the menus in the Maintenance directory to perform routine maintenance functions such as save configuration settings to hard disk and upgrading device firmware, view system log and perform device diagnostic tests. D-Link DSL-2640R User Manual...
  • Page 53: Password

    Typically on first things the administrator is likely to change is the device password used to access the management software. The administrator’s user name of the Router, admin, cannot be changed. The default password can be changed with the Password menu. Change the password and click the Apply Settings button to establish the new password. D-Link DSL-2640R User Manual...
  • Page 54: Save/Restore Settings

    To reset the Router to its factory default settings, click the Restore Device button. You will be prompted to confirm your decision to reset the Router. The Router will reboot with the factory default settings including IP address (192.168.1.1) with DHCP enabled and default administrator password (admin). D-Link DSL-2640R User Manual...
  • Page 55: Firmware Upgrade

    To upgrade firmware, type in the name and path of the file or click on the Browse button to search for the file. Click the Upgrade Firmware button to begin copying the file. The file will load and restart the Router automatically. D-Link DSL-2640R User Manual...
  • Page 56: Diagnostics

    Use this menu when working with your ISP to troubleshoot problems. Click the Re_run Diagnostics Tests button to view the connectivity status of the WAN connection. D-Link DSL-2640R User Manual...
  • Page 57: System Log

    Maintenance System Log Use the System Log to view a log of events that occur on the Router. D-Link DSL-2640R User Manual...
  • Page 58: Status

    Maintenance Status Use these read-only menus to view system information and monitor performance. D-Link DSL-2640R User Manual...
  • Page 59: Device Info

    Maintenance Device Info Use this menu to quickly view basic current information about the LAN and WAN interfaces and device information including Firmware Version and MAC address. D-Link DSL-2640R User Manual...
  • Page 60: Connected Clients

    Maintenance Connected Clients The Connected LAN Clients list displays active DHCP clients when the router is acting as a DHCP server and wireless clients. D-Link DSL-2640R User Manual...
  • Page 61: Statistics

    Maintenance Statistics Use this menu to monitor traffic on the Ethernet LAN, Wireless LAN or ADSL interface. This menu also displays information on the ADSL signal status. D-Link DSL-2640R User Manual...
  • Page 62: Technical Specifications

    RFC1334 PAP • RFC2364 PPP over ATM IP Settings: IP Address 192.168.1.1 Netmask 255.255.255.0 • RFC1389 RIP v2 • RFC2516 PPP over Ethernet User Name: admin Password: admin • RFC1577 Classical IP over DHCP Server: Enabled D-Link DSL-2640R User Manual...

Table of Contents