Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Panasonic KX-TCD952BLB
Summary of Contents for Panasonic KX-TCD952BLB
- Page 1 KX-TCD952GB(G)(01~07) 00.4.6 1:41 PM Page 1 Digital Cordless Phone KX-TCD952BLB Model No. Operating Instructions D EF A B C M NO JK L G H I WX YZ TU V PQ RS PLEASE READ BEFORE USE Caller ID Compatible AND SAVE.
-
Page 2: Before Initial Use
18/4/00 15:08 Page 2 Before Initial Use Thank you for purchasing your new Panasonic digital cordless telephone. Caller ID, where available, is a telephone company service. After subscribing to Caller ID, this phone will display the caller’s phone number. For your future reference Serial No. -
Page 3: For Best Performance
KX-TCD952BL(E)01~05 18/4/00 15:08 Page 3 For Best Performance Battery Charge Rechargeable Ni-Cd batteries power the handset. Install the batteries (p. 8) and charge them for about 4 hours before initial use (p. 10). Base Unit Location Calls are transmitted between the base unit and the handset using wireless radio waves. For maximum distance and noise-free operation, the recommended base unit location is: Away from electrical appliances such as a TV, In a HIGH and CENTRAL location with no... -
Page 4: Table Of Contents
KX-TCD952BL(E)01~05 18/4/00 15:08 Page 4 Contents Special Features ......21 Chapter 1 Handset Locator ......21 Preparation Setting the Key Lock ....22 Location of Controls ......6 Using the Recall Feature....22 Display ..........7 How to Use the Pause Feature Settings ..........8 (For Analog PBX Line/Long Installing the Batteries in the Distance Service Users) .....23 Handset .........8... - Page 5 KX-TCD952BL(E)01~05 18/4/00 15:08 Page 5 Chapter 4 Chapter 5 Multi-Unit User Operations Useful Information For Optional Multi-Unit Users..34 Replacing the Batteries....43 Operating More than One Important Notice Concerning the Handset ........34 Correct Use and Charging of Ni-Cd (Ni-MH) Batteries ....44 Operating More than One Base Unit ..........34 Before Requesting Help ....45...
-
Page 6: Location Of Controls
KX-TCD952BL(E)06~13 18/4/00 15:02 Page 6 Location of Controls Base unit Charge Contacts (p. 10) Antenna Caller ID Indicator ( (p. 16) Charge Indicator ( ) (p. 10) In Use Indicator ( ) (p. 21, 35) Page Button (p. 21, 35, 40) Handset Navigator Key Display (p. -
Page 7: Display
KX-TCD952BL(E)06~13 18/4/00 15:02 Page 7 Display (The display shows all possible configurations.) Icons The direct call icon is displayed when The in range icon indicates that the this mode is turned on (p. 26). handset is in range of the base unit. It flashes when the handset is out of The call prohibition icon is displayed range. -
Page 8: Settings
KX-TCD952BL(E)06~13 18/4/00 15:02 Page 8 Settings Installing the Batteries in the Handset Install the batteries as shown. Then install the handset cover. · If the rechargeable batteries are not inserted correctly, the handset will not work. Using the Belt Clip You can hang the handset on your belt or pocket using the belt clip. -
Page 9: Connections
Adaptor Telephone Line Cord · USE ONLY WITH Panasonic AC ADAPTOR KX-TCA11CE. · Be careful not to confuse the telephone line jack with the AC adaptor jack on the base unit. If connected improperly, the base unit will not work and damage may occur. -
Page 10: Battery Charge
Recharge When “ ” flashes or the unit beeps every 15 seconds, recharge the batteries. Battery information After your Panasonic batteries are fully charged: Operation Approx. Ni-Cd battery life (Included) Approx. Ni-MH battery life (Optional)* While in use (Talk) Up to about 6 hours... -
Page 11: Turning The Power On
KX-TCD952BL(E)06~13 18/4/00 15:02 Page 11 Turning the Power ON Press firmly. To turn the power OFF, press and hold until a beep sounds. · After all possible configurations briefly appear, · The display will go blank. the display will change to the following. Then ·... -
Page 12: Selecting The Handset Ringer Volume/Pattern
KX-TCD952BL(E)06~13 18/4/00 15:02 Page 12 Settings Selecting the Handset Ringer Volume/Pattern You can program the desired handset ringer volume and pattern. Make sure that the power is ON (p. 11) and the unit is in the stand-by mode. Ringer volume Ringer pattern 6 levels are available. -
Page 13: Selecting The Base Unit Ringer Volume
KX-TCD952BL(E)06~13 18/4/00 15:02 Page 13 Selecting the Base Unit Ringer Volume 3 levels (HIGH, MEDIUM, LOW) are available. The factory preset is MEDIUM. When set to OFF, the base unit will not ring. Make sure that the power is ON (p. 11) and the unit is in the stand-by mode. Press the desired volume level I NT Press... -
Page 14: Making Calls
KX-TCD952BL(E)14~23 18/4/00 15:04 Page 14 Making Calls Make sure that the power is ON (p. 11). · If “ ” flashes and an alarm tone sounds after pressing , move closer to the Press base unit. Then try again. · You can choose whether to display the length Dial a phone number. -
Page 15: Answering Calls
KX-TCD952BL(E)14~23 18/4/00 15:04 Page 15 To redial the last number dialed Press · The number is dialed automatically. Press ·The last number dialed is automatically redialed. To clear all of the numbers in the To redial after confirming the redial memory numbers in redial memory Press The unit automatically stores the last... -
Page 16: Caller Id Service
KX-TCD952BL(E)14~23 18/4/00 15:04 Page 16 Caller ID Service This unit is compatible with a Caller ID service offered by your telephone company. After subscribing to a Caller ID service, the calling party’s phone number will be displayed after the first ring. The unit can record the phone numbers of up to 50 different callers in the Caller List. -
Page 17: Using The Caller List
KX-TCD952BL(E)14~23 18/4/00 15:04 Page 17 Using the Caller List Viewing the Caller List Telephone numbers of up to 50 different callers are stored from the most recent to the oldest call in the Caller List. When the 51st call is received, the oldest call is deleted. To check the caller’s phone number, follow the steps below. -
Page 18: Calling Back From The Caller List
KX-TCD952BL(E)14~23 18/4/00 15:04 Page 18 Using the Caller List Calling Back from the Caller List Press I NT Press then · The displayed phone number is dialed Press automatically. · The most recent caller’s information is To hang up, press or place the displayed. -
Page 19: Clearing A Caller's Phone Number In The Caller List
KX-TCD952BL(E)14~23 18/4/00 15:04 Page 19 Clearing a Caller’s Phone Number in the Caller List You can clear a caller’s phone number in the Caller List. Make sure that the power is ON (p. 11) and the unit is in the stand-by mode. Press Press then... -
Page 20: Speed Dialer
KX-TCD952BL(E)14~23 18/4/00 15:04 Page 20 Speed Dialer Storing Phone Numbers in Memory You can store up to 20 phone numbers in the handset. Make sure that the power is ON (p. 11) and the unit is in the stand-by mode. ·... -
Page 21: Special Features
KX-TCD952BL(E)14~23 18/4/00 15:04 Page 21 Special Features Handset Locator From the base unit, you can locate the handset or page a person at the handset with ring tones. Handset 1 display Press · The in use indicator ( ) flashes on the base unit. ·... -
Page 22: Setting The Key Lock
KX-TCD952BL(E)14~23 18/4/00 15:04 Page 22 Special Features Setting the Key Lock You can lock the handset dialing buttons. Only incoming calls are accepted until the key lock is canceled. When the unit is in the stand-by mode, press and hold until a beep sounds. -
Page 23: How To Use The Pause Feature (For Analog Pbx Line/Long Distance Service Users)
KX-TCD952BL(E)14~23 18/4/00 15:04 Page 23 How to Use the Pause Feature (For Analog PBX Line/Long Distance Service Users) We recommend you press if a pause is required for dialing with a PBX or to access a long distance service. Ex: Line access number (PBX) Phone number ·... -
Page 24: Summary Of Programmable Functions
KX-TCD952BL(E)24~33 18/4/00 15:05 Page 24 Summary of Programmable Functions You can program the following function items using the handset near the base unit. See the corresponding pages for function details. Make sure that the power is ON (p. 11) and the unit is in the stand-by mode. <Stand-by mode>... -
Page 25: Setting The Password
0000. Changing the password may prevent the unauthorized use of your unit by another person. Once you have programmed the password, you cannot confirm it. We recommend you write down the password. If you forget it, please consult your nearest Panasonic Service Center. On the handset On the base unit... -
Page 26: Direct Call
KX-TCD952BL(E)24~33 18/4/00 15:05 Page 26 Direct Call You can easily make a call using a stored direct call number by pressing . Incoming calls are accepted. Setting the Direct Call Mode After storing the direct call number, the unit will automatically switch to the direct call mode. When the direct call mode is on, you can ONLY dial the number stored in the direct call memory. -
Page 27: Call Prohibition
” will go out. - - - - Enter the handset password (p. 25). If you forget your handset password, please · The current mode is displayed. consult your nearest Panasonic Service 1: ON 0: OFF Center. Ex. OFF F4 IO0 Press to select ON. -
Page 28: Call Restriction
KX-TCD952BL(E)24~33 18/4/00 15:05 Page 28 Call Restriction You can restrict desired handset(s) from dialing selected phone numbers. Phone numbers beginning with the restricted digits cannot be dialed out. For example, if “00” is assigned as the call restriction number, international calls cannot be made. For selected handset(s), you can assign up to 6 call restriction numbers (up to 8 digits). -
Page 29: Automatic Route Selection
KX-TCD952BL(E)24~33 18/4/00 15:05 Page 29 Automatic Route Selection Automatic Route Selection (ARS) is a feature which selects the least expensive carrier service when making long distance calls. After subscribing to a second carrier service, store the second carrier code. Then store the area codes (up to 25 codes) for which the second carrier service charge rates are lower than the first carrier service. -
Page 30: Storing The Carrier Code/Area Code(S)
KX-TCD952BL(E)24~33 18/4/00 15:05 Page 30 Automatic Route Selection Storing the Carrier Code/Area Code(s) To store the carrier code To store the area code(s) Press then IN T I N T Press then Press Press Enter the base unit password (p. 25). Enter the base unit password (p. -
Page 31: Other Programmable Settings
KX-TCD952BL(E)24~33 18/4/00 15:05 Page 31 Other Programmable Settings Setting the Key Tones Setting the Range Warning Alarm You can choose whether or not the handset keys will sound tones (key tone, confirmation You can choose whether or not the handset will tone, error tone). -
Page 32: Selecting The Talk Mode Display
KX-TCD952BL(E)24~33 18/4/00 15:05 Page 32 Other Programmable Settings Selecting the Talk Mode Display You can choose whether to display the length of the call or the dialed telephone number while in the talk mode. The factory preset is the length of the call. During a conversation, the display will be as Press follows. -
Page 33: Clearing The Settings In Memory
KX-TCD952BL(E)24~33 18/4/00 15:05 Page 33 Clearing the Settings in Memory This function enables the handset or base unit to clear the following settings at one time. They will return to their initial settings. On the handset On the base unit Function Initial setting Function... -
Page 34: For Optional Multi-Unit Users
· The optional handset model number is KX-A102CEB. The functions of the optional handset are the same as those of the KX-TCD952BLB handset. · An optional charger, KX-TCA110CEB, is available from your Panasonic dealer. Operating More than One Base Unit You can register and operate your handset at up to 4 base units. -
Page 35: Registration
KX-TCD952BL(E)34~42 18/4/00 15:06 Page 35 Registration Registering a Handset in the Base Unit You must register the handset in the base unit before use. · Charge the optional handset batteries for about 4 hours before initial use. · Make sure that the power is ON (p. 11) and the unit is in the stand-by mode. ·... -
Page 36: Selecting The Base Unit Access
KX-TCD952BL(E)34~42 18/4/00 15:06 Page 36 Registration Selecting the Base Unit Access Automatic base unit access The handset automatically selects a registered base unit. · When the handset moves to another base unit radio area, it loses contact with the previous base unit and automatically accesses the new base unit. -
Page 37: Canceling A Handset
KX-TCD952BL(E)34~42 18/4/00 15:06 Page 37 Canceling a base unit Canceling a Handset If another handset is out of range and/or its Each handset can cancel itself or another power is OFF when “Canceling a Handset”, the handset. previous base unit number will still remain in the IN T Press then... -
Page 38: Selecting The Stand-By Mode Display
KX-TCD952BL(E)34~42 18/4/00 15:06 Page 38 Selecting the Stand-by Mode Display You can choose to display whether the currently connected base unit number, handset number or no display while in the stand-by mode. The factory preset is the base unit number. Press Press to select the desired... -
Page 39: Selecting All Handsets
KX-TCD952BL(E)34~42 18/4/00 15:06 Page 39 Selecting first handset Press a dialing button select the ring count. One handset will ring first, then all other handsets will ring if the first handset is not Press answered. You can choose which handset will ·... -
Page 40: Paging/Intercom
KX-TCD952BL(E)34~42 18/4/00 15:06 Page 40 Paging/Intercom Paging All Handsets from the Base Unit The base unit user can page all handsets. Press · All handsets will ring for 1 minute. To stop paging, press again or press on one of the handsets. Intercom between Handsets A 2-way intercom is available between handsets. -
Page 41: Transferring A Call From One Handset To Another
KX-TCD952BL(E)34~42 18/4/00 15:06 Page 41 Transferring a Call from One Handset to Another The intercom can be used during a call, enabling you to transfer a call between handsets registered to the same base unit. Transferring a call using the Transferring a call without the intercom intercom... -
Page 42: Conference
KX-TCD952BL(E)34~42 18/4/00 15:06 Page 42 Paging/Intercom Conference During a call using the handset, you can make an intercom call to another handset and then combine the calls together to establish a conference call between handsets registered to the same base unit. Handset 1: Handset 1: During a call, press... -
Page 43: Replacing The Batteries
Ni-MH battery: For about 8 hours. · Discard defective batteries as soon as possible. Defective batteries may leak into the unit. · Please use only Panasonic P-03H or P-P03S batteries. · If the rechargeable batteries are not inserted correctly, the handset will not work. -
Page 44: Important Notice Concerning The Correct Use And Charging Of Ni-Cd (Ni-Mh) Batteries
KX-TCD952BL(E)43~51 18/4/00 15:07 Page 44 Replacing the Batteries Caution: To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the batteries specified. 2. Do not use non-rechargeable batteries. 3. Do not mix old and new batteries. 4. -
Page 45: Before Requesting Help
KX-TCD952BL(E)43~51 18/4/00 15:07 Page 45 Before Requesting Help Problem Remedy · Turn the power ON (p. 11). The unit does not work. · Check the settings (p. 8–13). · Charge the batteries fully (p. 10). · Clean the charge contacts and charge again (p. 10). ·... - Page 46 KX-TCD952BL(E)43~51 18/4/00 15:07 Page 46 Before Requesting Help Problem Remedy · Programming is not possible while the unit is in the You cannot program function items such as the dialing mode. talk or intercom mode. · Do not pause for over 60 seconds while programming.
- Page 47 KX-TCD952BL(E)43~51 18/4/00 15:07 Page 47 Problem Remedy · The base unit has registered a maximum of You cannot register the handset in the base unit. 6 handsets or the handset has registered a maximum of 4 base units. · A wrong base unit password was entered. Enter the correct password.
-
Page 48: Adding Another Phone
KX-TCD952BL(E)43~51 18/4/00 15:07 Page 48 Adding Another Phone This unit will not function during a power failure. We recommend you connect a standard telephone on the same line for power failure protection. Standard Telephone To Single Line Telephone Jack Telephone Line Cord... -
Page 49: Safety Instructions
KX-TCD952BL(E)43~51 18/4/00 15:07 Page 49 Safety Instructions Take special care to follow the safety suggestions listed below. Safety 1) The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 2) When the unit is not used, turn the power off. -
Page 50: Term Definitions
15:07 Page 50 Dear purchaser, You have acquired a KX-TCD952BLB, which is a product made in regard with the European Standards for Cordless Telephones (DECT). DECT technology is characterized by high-security protection against interceptions as well as high-quality digital transmission. - Page 51 KX-TCD952BL(DUTCH)43~52 18/4/00 14:33 Page 51...
- Page 52 This product is in conformity with the essential requirements of the ‘R&TTE Directive 1999/5/EC’. 1999/5/EC Sales department: Panasonic Belgium N.V. Stationsstraat 26, B-1702 Groot Bijgaarden, BELGIUM Manufacturer: Kyushu Matsushita Electric (U.K.) Ltd. Pencarn Way, Duffryn, Newport, South Wales, NP10 8YE, United Kingdom...