hit counter script
Miele TX2070 Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Cooktop
  5. TX2070
  6. Operating and installation instructions
Miele TX2070 Operating And Installation Instructions

Miele TX2070 Operating And Installation Instructions

Ceramic cooktop
Hide thumbs Also See for TX2070:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating and installation instructions
Ceramic cooktop
To avoid the risk of accidents or damage to the appliance, it is essential
to read these instructions before it is installed and used for the first time.
en - AU, NZ
M.-Nr. 07 687 890

Advertisement

Table of Contents
loading

Related Manuals for Miele TX2070

Summary of Contents for Miele TX2070

  • Page 1 Operating and installation instructions Ceramic cooktop To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en - AU, NZ M.-Nr. 07 687 890...

  • Page 2: Table Of Contents

    Contents Guide to the appliance ..........4 Cooktop .
  • Page 3 Contents To test the power setting ......... . 40 Optional accessories .

  • Page 4: Guide To The Appliance

    Guide to the appliance Cooktop abcd Cooking zones Control panel...

  • Page 5: Control Panel

    Guide to the appliance Control panel Sensors a For switching the cooktop on or off b For setting the power settings c Safety lock d For selecting the cooking zones Check/Refill indicators f Safety lock Cooking zone display = Cooking zone ready for use 1 to 9 = Power settings = Residual heat...

  • Page 6: Cooking Zones

    Guide to the appliance Cooking zones Cooking zone KM 5600 C in cm Rating in watts for 230 V 18.0 1800 14.5 1200 21.0 2200 14.5 1200 Total: 6400...

  • Page 7: Warning And Safety Instructions

    They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions.
  • Page 8 Warning and Safety instructions Correct application This cooktop is designed for domestic use and for use in similar environments by guests in hotel or motel rooms, bed & breakfasts and other typical living quarters. This does not include common/shared facilities or commercial facilities within hotels, motels or bed &...
  • Page 9 Warning and Safety instructions Safety with children Small children must be kept away from the appliance unless they are constantly supervised. Older children may only use the appliance if they have been shown how to use it in a safe way and understand the hazards involved.
  • Page 10 Installation, maintenance and repairs by unqualified persons could be dangerous. Miele cannot be held liable for unauthorised work. A damaged appliance can be dangerous. Check the appliance for visible signs of damage.
  • Page 11 The manufacturer can only guarantee the safety of the appliance when original Miele replacement parts are used. Faulty components must only be replaced by genuine Miele original spare parts. The cooktop is not intended for use with an external timer switch or a remote control system.
  • Page 12 Warning and Safety instructions Danger of electric shock. Do not use the cooktop if it is faulty, or if the ceramic surface is cracked, chipped or damaged in any way. Switch it off immediately, and disconnect it from the mains electricity supply. In areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings clean at all times.
  • Page 13 Warning and Safety instructions Correct use Oil and fat can overheat and catch fire. Do not leave the appliance unattended when cooking with oil or fat. If oil or fat does catch fire, do not attempt to put out the flames with water. Disconnect the appliance from the mains and use a suitable fire blanket, saucepan lid, damp towel or similar to smother the flames.
  • Page 14 Warning and Safety instructions The appliance gets hot when in use and remains hot for a while after being switched off. There is a danger of burning until the residual heat indicators go out. You could burn yourself on the hot cooktop. Protect your hands with heat-resistant pot holders or gloves when handling hot pots and pans.
  • Page 15 Pots and pans made of aluminium or with an aluminium base can leave a metallic sheen on the cooktop. This can be removed with the Original Miele ceramic and stainless steel cooktop cleaner (see "Cleaning and care"). To prevent the risk of spillages etc. burning on, remove any soiling as quickly as possible and ensure that pan bases are clean, dry and free of grease.

  • Page 16: Caring For The Environment

    Caring for the environment Disposal of the packing Disposing of your old material appliance The transport and protective packing Electrical and electronic appliances has been selected from materials often contain materials which, if which are environmentally friendly for handled or disposed of incorrectly, disposal and should be recycled.

  • Page 17: Before Using For The First Time

    Before using for the first time Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service" section of this booklet. Cleaning for the first time ^ Remove any protective wrapping and adhesive labels. ^ Before using for the first time, clean the appliance with a damp cloth only and then wipe dry.

  • Page 18: How The Cooking Zones Work

    How the cooking zones work Single circle cooking zones have one heating element, whilst double circle cooking zones and extended zones have two. Depending on the model, the heating elements may be separated by an insulating ring. Each cooking zone has overheating protection (a temperature limiter), which stops the ceramic surface from becoming too hot (see "Overheating protection").

  • Page 19: Use

    Operation This ceramic cooktop is equipped with electronic sensor switches which react to finger contact. To operate a cooking zone, touch the relevant sensor. Each time you touch a sensor, an audible tone sounds. The cooking zones have to be "active" when you want to set or adjust a power setting or the duration.

  • Page 20: Switching On

    Switching on The cooktop must be switched on before any of the zones can be used. Do not leave the appliance unattended whilst it is being used. To switch the cooktop on ^ Touch the "s" sensor. 0 appears in each of the cooking zone displays. If no further entry is made, the cooktop will switch itself off after a few seconds for safety reasons.

  • Page 21: Settings

    Settings The appliance is programmed with 9 power settings at the factory. If you wish to fine-tune a setting, you can extend the power setting range (see "Programming"). The intermediate setting will be represented by an illuminated dot next to the number.

  • Page 22: Auto Heat-Up

    Auto heat-up When Auto heat-up has been activated, the cooking zone switches on automatically at the highest setting and then switches to the continued cooking setting which you have previously selected. The heat-up time depends on which continued cooking setting has been chosen (see chart). As the higher continued cooking settings are generally used for frying food, only a relatively short heat-up time is needed to heat up the pan initially.
  • Page 23 Continued cooking Heat-up time setting* in minutes and seconds (approx.) 1 : 20 2 : 00 2 : 45 3 : 25 4 : 05 4 : 45 5 : 30 6 : 10 6 : 50 7 : 10 1 : 20 2 : 00 2 : 45...

  • Page 24: Switching Off And Residual Heat Indicators

    Switching off and residual heat indicators To switch off a cooking zone ^ Touch the sensor of the required cooking zone twice. A 0 flashes in the cooking zone display for a few seconds. If the cooking zone is still hot, the residual heat indicator will then appear in the display.

  • Page 25: Pots And Pans

    – Pots and pans made of aluminium or with an aluminium base can leave a metallic sheen on the cooktop. This can be removed with the Original Miele ceramic and stainless steel cooktop cleaner (see "Cleaning and care"). – Do not use pots and pans on the ceramic cooktop with bases with pronounced edges or ridges, e.g.

  • Page 26: Tips On Saving Energy

    Tips on saving energy – Check that the diameter of the pan base is wide enough for the cooking zone so that heat is not lost unnecessarily. Too small Suitable – Use a lid whenever possible to minimise heat loss. Uncovered Covered –...

  • Page 27: Safety Features

    Safety features Safety lock/System lock Keep children away from the cooktop for their own safety. Your appliance is equipped with a safety lock to prevent the cooktop and the cooking zones being switched on or any settings being altered. The Safety lock is activated when the cooktop is switched on.
  • Page 28 Safety features To activate the safety lock ^ Touch the sensor switch $ until the appropriate control light lights up and an audible tone sounds. The indicator lamp will go out after a short while. To deactivate the safety lock ^ Touch the $ sensor until the indicator lamp goes out.

  • Page 29: Safety Cut-Out

    Safety features Safety cut-out Safety switch-off with an over-long cooking time If one of the cooking zones is heated for an unusually long period of time (see chart), and the power settings are not altered, the cooktop will switch itself off automatically and the corresponding residual heat indicator will appear.

  • Page 30: Overheating Protection

    Safety features Overheating protection Cooking zones Each zone is equipped with overheating protection (internal temperature limiter). This switches off the heating element automatically before the ceramic surface overheats. You can tell that the overheating protection has activated because the heating switches on and off even when the highest setting is selected.

  • Page 31: Cleaning And Care

    Cleaning and care Do not use a steam cleaning appliance to clean this appliance. The steam could reach the electrical components and cause a short circuit. The appliance should be cleaned regularly, preferably after each use. Allow it to cool down to room temperature before cleaning.
  • Page 32 Wipe all coarse soiling off using a damp cloth. Stubborn soiling may need to be removed with a shielded scraper blade. Then clean the cooktop with the Original Miele ceramic and stainless steel cooktop cleaner (see "Optional accessories"), applied with kitchen paper or a clean cloth. Do not apply cleaner whilst the cooktop is still hot, as this could result in marking.

  • Page 33: Additional Functions

    Additional functions Reset This appliance is supplied with a reset function. This function allows you to reset the settings of the programming to the factory default settings. How to reset ^ Switch the cooktop on. ^ Touch the front left and the front right sensors of the cooking zones simultaneously for 10 seconds.

  • Page 34: Programming

    Additional functions Programming You can change the default settings of the programme options (see chart). Several settings can be altered in succession. After calling up programming, P (programme), S (status) and numbers appear in the cooking zone display. This shows the current setting.
  • Page 35 Additional functions Programme* Status** Setting Demonstration mode and Demonstration mode on (the front left d and front right E factory default settings cooking zone displays come on after switching the cooktop on). Demonstration mode off Factory default settings reinstated Power setting range 9 power settings (1, 2, 3 ...

  • Page 36: Problem Solving Guide

    Problem solving guide With the aid of the following guide, minor problems can be easily corrected without contacting Miele. This will save you time and money because you won't need to book a Service technician. The following information may help you to find the reason for a fault, and to correct it.
  • Page 37 Problem solving guide Problem Possible cause Remedy After switching the The appliance is in You need to deactivate cooktop on, d appears in demo-mode. the demo-mode (see the front left and E "Programming"). appears in the front right cooking zone display. The cooking zones won't heat up.
  • Page 38 Problem solving guide Problem Possible cause Remedy The appliance switches One or several of the Clean the control area or off during operation sensors are covered, remove the obstruction (see and F appears in all for example, by finger "Safety switch-off"). cooking zone displays contact, food boiling over or by an object...
  • Page 39 There has been an alignment minute. fault after resetting the If this does not solve the appliance or after a power problem, please call Miele. cut. If the display doesn't switch off after 5 minutes, proceed as described on the right.

  • Page 40: To Test The Power Setting

    To test the power setting You can test the power setting of a cooking zone by measuring how long it takes to bring a specific amount of water to the boil. The pan (and lid) must be stainless steel or enamel. The diameter of the pan must match the cooking zone, and be flat-bottomed or slightly concave.
  • Page 41 To test the power setting Cooking zone Rating in watts for Quantity of water Duration* C in cm 230 V in litres in minutes 10.0 11.0 12.0 700 / 750 13.0 12.0 1200** 11.0 14.5 1000 / 1100 14.5 1200 14.5 1500** 17.0...

  • Page 42: Optional Accessories

    Miele offers a comprehensive range of useful accessories as well as cleaning and conditioning products for your Miele appliances. These can be ordered online at: or from Miele (see back of manual for contact details). Cleaning products Original Miele ceramic and stainless steel cooktop cleaner 250 ml Removes heavy soiling, limescale deposits and aluminium residues.

  • Page 43: Safety Instructions For Installation

    Safety instructions for installation After installing the cooktop, ensure All electrical work should be that the connection cable cannot come undertaken by a suitably qualified into contact with the underside of the and competent person in strict appliance. Make sure that there is no mechanical obstruction, such as a accordance with current national and local safety regulations.

  • Page 44: Safety Clearances

    Safety clearances Safety distance to the undershelf Safety distance above the appliance It is not necessary to install an undershelf underneath the cooktop. If you do, however, install an undershelf, you have to ensure a safety distance between the upper edge of the worktop and the upper edge of the undershelf of at least 110 mm.
  • Page 45 Safety clearances Safety distances to the sides and back of the cooktop Ideally the cooktop should be installed with plenty of space on either side. There may be a wall at the rear or a tall unit or wall on one side (right or left). On the other side, however, no unit or divider should stand higher than the cooktop (see illustrations).

  • Page 46: Notes On Installation

    Notes on installation Cooktops with frames and Tiled worktop bevelled edges Seal between the cooktop and the worktop Grout lines a and the hatched area underneath the cooktop frame must be smooth and even. If they are not, the cooktop will not sit flush with the worktop and the sealing strip underneath the cooktop will not provide The sealing strip under the edge of the...

  • Page 47: Building-In Dimensions

    Building-in dimensions a Spring clamps b Building-in height c Mains connection box with mains connection cable, L = 1,440 mm d Front...

  • Page 48: Installation

    Installation Wooden worktops Attach the spring clamps and the ^ Seal the cut surfaces of wooden support brackets (only for cooktops worktops with a suitable with bevelled edges) as applicable. heat-resistant sealant to avoid swelling caused by moisture. Cooktops with bevelled edges: These cooktops have a sealing strip Make sure these materials do not underneath them to keep the cooktop...
  • Page 49 Installation Granite and marble worktops Use a strong double-sided tape and silicone for the installation (not supplied). ^ Coat the side edges and the lower edges of the spring clamps and the support brackets with silicone. ^ Fasten the spring clamps and the support brackets (only for cooktops with bevelled edges) with the double-sided tape c.

  • Page 50: Installing The Cooktop

    In stubborn cases, or if the cooktop is spring clamps. not accessible from below, use a cooktop lever (available from Miele) to ^ Using both hands, press down lift up the cooktop. To prevent damage evenly on the sides of the appliance to the worktop, position a cloth or until it clicks into position.

  • Page 51: Electrical Connection

    When switched off there must be an type H 05 VV-F, available from all-pole contact gap of at least 3 mm in Miele. the isolator switch (including switch, fuses and relays). Ensure power is not supplied to the appliance until after installation or repair work has been carried out.

  • Page 52: Wiring Diagram

    Electrical connection Wiring diagram The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system, which complies with current local and national safety regulations. It is most important that this basic safety requirement is present and regularly tested and, where there is any doubt, the electrical wiring in the home should be inspected...

  • Page 53: After Sales Service, Data Plate, Warranty

    In the event of any faults which you cannot remedy yourself, please contact: – Miele (see back of manual for contact details). When contacting Miele, please quote the model and serial number of your appliance. These are given on the data plate.
  • Page 56 KM 5600 en - AU, NZ M.-Nr. 07 687 890 / 07...

Table of Contents