Updating The Bios; Changing The Bios Settings Before Installing A New Operating System; Recovering From A Bios Update Failure - Lenovo ThinkCentre M79 Hardware Maintenance Manual
Hide thumbs
Also See for ThinkCentre M79:
- Hardware maintenance manual (186 pages) ,
- User manual (154 pages) ,
- Safety, warranty, and setup manual (2 pages)
Table of Contents
Advertisement
from other layers of software into electrical signals that the computer hardware can execute. You can use the
Setup Utility program to view or change the configuration settings of your computer. See "Using the Setup
Utility program" on page 63 for detailed information.
The system board of your computer has a module called electrically erasable programmable read-only
memory (EEPROM, also referred to as flash memory). It enables you to update the POST, the BIOS, and
the Setup Utility program easily. To perform such an update, you can either start your computer with a
system-program-update disc or run a special update program from your operating system.
Lenovo might make changes and enhancements to the POST and BIOS. When updates are released, they
are available as downloadable files on the Lenovo Web site at http://www.lenovo.com. Instructions for using
the POST and BIOS updates are available in a TXT file that is included with the update files. For most
models, you can download an update program that can be used to create a system-program-update disc
or be run from the operating system.
Updating the BIOS
When you install a new program, hardware device, or device driver, you might be informed to update
the BIOS. You can update the BIOS from your operating system or a flash update disc (supported only
on some models).
To update the BIOS, do the following:
1. Go to http://www.lenovo.com/drivers.
2. Download the flash BIOS update driver for the operating system version or the ISO image version (used
to create a flash update disc). Then, download the installation instructions for the flash BIOS update
driver you download.
3. Print the installation instructions you download and follow the instructions to update the BIOS.
Note: If you want to update the BIOS from a flash update disc, the installation instructions might not provide
the information about how to record the update disc. See "Recording a disc" on page 47.
Changing the BIOS settings before installing a new operating system
BIOS settings vary by operating system. Change the BIOS settings before installing a new operating system.
To change the BIOS settings, do the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 63.
2. From the Setup Utility program main menu, select Exit ➙ OS Optimized Default.
3. Depending on the operating system to be installed, do one of the following:
• To install the Windows 8.1 (64-bit) operating system, select Enabled.
• To install an operating system other than Windows 8.1 (64-bit), select Disabled.
4. Select Yes in the window displayed and press Enter to confirm your selection.
5. Press F10 to save changes and exit the Setup Utility program. See "Exiting the Setup Utility program"
on page 68.
Recovering from a BIOS update failure
To recover from a BIOS update failure, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 103.
.
Chapter 6
Advanced configuration
69
Advertisement
Table of Contents
Troubleshooting
