Setting The Functions - LG LSFS213 series Owner's Manual
French door
Hide thumbs
Also See for LSFS213 series:
- Owner's manual (52 pages) ,
- Owner's manual (150 pages) ,
- Manual del propietario (51 pages)
Table of Contents
Advertisement
Available languages
Available languages
SETTING THE FUNCTIONS
Press the button for the desired function to view and
select other settings.
SETTING THE DISPENSER LOCK
SETTING THE DOOR ALARM
Press the ALARM/LOCK button once to activate
and deactivate the door alarm function.
NOTE: Contact your local service center if the
alarm continues to sound after the doors are closed.
RESETTING THE FILTER INDICATOR
NOTE: It is recommended that you replace the filter
when the water filter indicator light reaches 0 or
whenever the water or ice cube taste deteriorates
noticeably.
The diagnostic function automatically detects problems with your refrigerator, and a diagnostic code will
appear in the display. NOTE: If a diagnostic code appears in the display during use, note the code and
USA 1-800-243-0000 CANADA 1-888-LGCANADA
then call
and select the option to locate an authorized servicer.
24
Press and hold the
ALARM/LOCK button for
three seconds to lock the
dispenser and all of the
other control panel functions.
Press and hold again for
3 seconds to unlock.
The ALARM/LOCK button
also controls the door alarm
that sounds three times in
30-second intervals when
a compartment door is left
open for more than 60
seconds. The alarm stops
sounding when the door is
closed.
Press and hold the
LIGHT/FILTER button for
more than 3 seconds to
reset the filter indicator
after the water filter has
been replaced.
DIAGNOSTIC FAILURE DETECTION
ACTIVATING ICE PLUS
Press the ICE PLUS/ENERGY
SAVING button once to activate
the ICE PLUS function. The ICE
PLUS icon on the display panel
will illuminate when activated.
The ICE PLUS function runs the
freezer compartment at the
coldest setting for a 24-hour
period to increase icemaking by
up to about 20%, and then turns
off automatically.
NOTE: Press the button again to deactivate
the ICE PLUS function.
ACTIVATING ENERGY SAVING
Press the ICE PLUS/ENERGY
SAVING button for at least 3
seconds to activate or
deactivate the function.
This function is recommended
for added energy savings.
(Some heaters to reduce excess
moisture on the refrigerator may
be turned off)
The energy saving function is also recommended
during long periods of time spent away from
home-like vacation.
(24 hours per day/7 days per week)
Hide quick links:
Advertisement
Chapters
Table of Contents
