Ip Address Settings - Epson TM-T88V-DT User Manual

Server direct print

Hide thumbs Also See for TM-T88V-DT:

Table of Contents

IP Address Settings

Set an IP address. This setting is the same as for Windows computers. Use the following procedure.

 Setting in Windows

 Setting in EPSON TMNet WebConfig (TM-DT software ver. 2.x or later)

 Setting in EPSONNet Config (TM-DT software ver. 2.x or later)

Setting in Windows

Click [Start] - [Control Panel] - [View network status and tasks] and make a "Network connection".

Right-click the connection you want to set, and then select the connection properties.

Setting in EPSON TMNet WebConfig

You can make these settings via a network from the computer you want to set. You can set an IP address

even if a display is not connected to TM-DT. Use the following procedure.

Start EPSON TMNet WebConfig from the shortcut on the desktop.

EPSON TMNet WebConfig starts.

If you are making settings from an external device, set the TM-DT IP address in the

address for the Web browser. The default IP address for TM-DT is 192.168.192.168.

http://[IP address of TM-DT]/webconfig/

Select as [Settings]-[System settings]-[Wired LAN]-[TCP/IP].

The "TCP/IP Setting (Wired)" screen appears.

Make the other network settings, and then click [Apply].

Setting in EPSONNet Config

To set an IP address for TM-DT from an external device, use EPSONNet Config. You can set an IP address

even if a display is not connected to TM-DT. For more information, refer to the EPSONNet Config Operation

Guide.

The default IP address for TM-DT is 192.168.192.168.

Chapter 2

Sample Program

Table of Contents

Tm-t70-i Tm-t70ii-dt Tm-t82ii-i Tm-l90-i Tm-h6000iv-dt Tm-t88v-i