Table of Contents
Advertisement
WARNING
: Always remove the battery pack from
the tool when changing operation settings or when
the tool is not in use. Failure to remove the battery
pack may result in accidental starting and serious
personal injury.
SETTING THE BLADE DEPTH
See Figure 12.
Always keep the correct blade depth setting. The correct
blade depth setting for all cuts should not exceed 1/4 in.
below the material being cut. More blade depth will
increase the chance of kickback and cause the cut to be
rough. For more depth of cut accuracy, a scale is located
on the upper blade guard.
Remove the battery pack from the saw.
Loosen the depth adjustment knob.
Determine the desired depth of cut.
Locate the depth of cut scale on the back of the upper
blade guard.
Hold the base flat against the workpiece and raise or
lower the saw until the indicator mark on the bracket
aligns with the desired scale measurement on the
blade guard.
Tighten the depth adjustment knob securely.
OPERATION
TO
TIGHTEN
TO
LOWER SAW
17
TO
LOOSEN
DEPTH
ADJUSTMENT
KNOB
BASE
ASSEMBLY
Fig. 12
- Quick Links:
- Assembly
- Operation
- Adjustments
- Maintenance
- Exploded View and Parts List
Hide quick links:
Advertisement
Table of Contents
