Basic Operations; Switching Power On/ Off; Adjusting The Volume; Selecting A Zone And Channel - Kenwood NX-5200 User Manual
Vhf, uhf and 700/800mhz digital transceiver
Hide thumbs
Also See for NX-5200:
- User manual (224 pages) ,
- Service manual (126 pages) ,
- Common function reference (476 pages)
Table of Contents
Advertisement
Available languages
Available languages
SWITCHING POWER ON/ OFF
Turn the Power switch/ Volume control clockwise to switch the
transceiver power ON.
Turn the Power switch/ Volume control counterclockwise to
switch the transceiver power OFF.
ADJUSTING THE VOLUME
Rotate the Power switch/ Volume control to adjust the volume.
SELECTING A ZONE AND CHANNEL
1 Select the desired zone using the 4-way D-pad or the keys
programmed as [Zone Up]/ [Zone Down]. Each zone
contains a group of channels.
2 Select the desired channel using the Selector knob or the
keys programmed as [Channel Up]/ [Channel Down]. Each
channel is programmed with settings for transmitting and
receiving.
The default setting for the Selector knob is [Channel Select].
●
The transceiver may have names programmed for zones and
●
channels. The zone name and channel name can contain up to 16
and 14 characters respectively. While selecting a zone, the zone
name will appear above the channel name.
If programmed by your dealer, your transceiver will announce the
●
zone and channel numbers as you change them.
24
BASIC OPERATIONS
Hide quick links:
Advertisement
Chapters
Table of Contents
