Page 1
4-573-403-31(1) FM/MW/SW Operating Instructions Digital Media Player To cancel the demonstration (DEMO) display, see page 10. For the connection/installation, see page 16. DSX-A100U...
Page 2
OFF until the display disappears each time you turn the ignition off. Disclaimer regarding services offered by third parties Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.
Guide to Parts and Controls Main unit Front panel release button SEEK +/– Tune in radio stations automatically. Press and SRC (source) hold to tune manually. Turn on the power. / (prev/next) Change the source. / (fast-reverse/fast-forward) ...
Page 5
MEGA BASS /// Reinforces bass sound in synchronization with Select a setup item, etc. the volume level. Press to change the MEGA ENTER BASS setting: [1], [2], [OFF]. Enter the selected item. AUX input jack / (prev/next) +/–...
Setting the Clock Getting Started Press MENU, rotate the control dial to select [SET GENERAL], then press it. Detaching the Front Panel Rotate the control dial to select [SET You can detach the front panel of this unit to CLOCK-ADJ], then press it. prevent theft.
Connecting Other Portable Listening to the Radio Audio Device Listening to the Radio Turn off the portable audio device. To listen to the radio, press SRC to select [TUNER]. Turn down the volume on the unit. Connect the portable audio device to the Storing automatically (BTM) AUX input jack (stereo mini jack) on the unit with a connecting cord (not...
Receiving the stored stations Playback Select the band, then press a number button (1 to 6). Playing a USB Device MSC (Mass Storage Class) and MTP (Media Transfer Using Radio Data System (RDS) Protocol) type USB devices (such as a USB flash drive, digital media player, Android™...
Press ENTER to return to the Quick- Searching and Playing Tracks BrowZer mode. The selected item appears. Rotate the control dial to select the Repeat play and shuffle play desired item, then press it. During playback, press (repeat) or Playback starts. (shuffle) repeatedly to select the desired play mode.
General Setup (GENERAL) Settings DEMO (demonstration) Activates the demonstration: [ON], [OFF]. Canceling the DEMO Mode CLOCK-ADJ (clock adjust) (page 6) You can cancel the demonstration display which appears when the source is off and the clock is CAUT ALM (caution alarm) displayed.
To turn the light back on, press any button on If you have any questions or problems concerning the unit or the remote commander. your unit that are not covered in this manual, consult your nearest Sony dealer. DIMMER Changes the display brightness: [ON], [OFF]. Maintenance...
CAUTION Specifications Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type. Tuner section + side up Tuning range: 87.5 – 108.0 MHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: FM CCIR: -1,956.5 to -487.3 kHz and +500.0 to +2,095.4 kHz Usable sensitivity: 7 dBf Notes on the lithium battery...
Page 13
Sampling rate: 32 kHz, 44.1 kHz, 48 kHz This product is protected by certain intellectual FLAC (.flac) property rights of Microsoft Corporation. Use or Bit depth: 16 bit, 24 bit distribution of such technology outside of this Sampling rate: 44.1 kHz, 48 kHz product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.
The display disappears from/does not appear in Troubleshooting the display window. The dimmer is set to [DIM-ON] (page 11). The following checklist will help you remedy The display disappears if you press and hold OFF. problems you may encounter with your unit. ...
Page 15
A USB device takes longer to play. If these solutions do not help improve the situation, The USB device contains files with a complicated consult your nearest Sony dealer. tree structure. The sound is intermittent. The sound may be intermittent at a high-bit-rate.
Parts List for Installation Connection/Installation Cautions Run all ground (earth) leads to a common ground (earth) point. × 2 Do not get the leads trapped under a screw, or caught in moving parts (e.g., seat railing). ...
Connection Power amplifier* White White/black striped Front speaker* Gray Gray/black striped Green Green/black striped Rear speaker* Purple Purple/black striped Black Yellow For details, see “Making connections” (page 18). Blue/white striped from a wired remote control (not supplied)* from a car antenna (aerial) *1 Not supplied *3 RCA pin cord (not supplied) *2 Speaker impedance: 4 –...
Memory hold connection Making connections When the yellow power supply lead is connected, To a common ground (earth) point power will always be supplied to the memory circuit even when the ignition switch is turned off. First connect the black ground (earth) lead, then connect the yellow and red power supply leads.
Before installing, make sure the catches on both makes of Japanese cars. In such a case, consult your sides of the bracket are bent inwards 2 mm ( Sony dealer. in). When mounting in a Japanese car, see TOYOTA “Mounting the unit in a Japanese car”...
If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.