Table of Contents
Advertisement
Time-setting options
en
To ensure an even cooking result, do not place your
food in the cooking compartment until rapid heat up is
complete.
Making settings
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heating function cannot be started.
Set the type of heating and temperature.
1.
Press the
button.
c
2.
The
symbol appears on the left next to the
c
temperature. The temperature indicator starts to fill in.
When rapid heating is complete, a signal sounds. The
symbol goes out. Place your dish in the cooking
c
compartment.
Notes
If a cooking time has been set, this runs
■
independently of rapid heating and counts down
immediately when the operation is started.
You can use the
button to check the current
l
■
cooking compartment temperature during rapid
heating.
Cancelling
Press the
button. The
c
the display.
14
symbol disappears from
c
OTime-setting options
Your appliance has different time-setting options.
i o n s
T i m e - s e t t i n g o p t
Time-setting option
Use
Timer
The timer functions like an egg timer. An
Q
audible signal sounds once the set time
has elapsed.
Cooking time
A signal sounds once a set cooking time
+
has elapsed. The appliance switches off
automatically.
End time
Set a cooking time and an end time. The
*
appliance switches off automatically so
that the operation ends at the desired
time.
Notes
A cooking time of up to one hour can be set exactly
■
to the minute.
A cooking time over one hour can be set in five-
minute increments.
Depending on which direction you turn the rotary
■
selector, the cooking time starts at a default value:
Anti-clockwise, 10 minutes,
Clockwise, 30 minutes.
After a time-setting option has elapsed, a signal
■
sounds and "Finished" appears in the status bar.
Using the
l
button, you can request information
■
during the operation, which then appears briefly in
the display.
Timer
You can set the timer at any time, even if the appliance
is switched off. It runs parallel to the other time settings
and has a separate audible signal. In this way, you can
tell whether it is the timer or a cooking time which has
elapsed.
The maximum setting you can apply is 24 hours.
Press the
button.
0
1.
The field for the timer opens.
Use the rotary selector to set the timer duration.
2.
The timer starts after a few seconds.
The
symbol for the timer and the time counting down
U
are displayed on the left in the status bar.
When the time has elapsed
An audible signal sounds. "Timer elapsed" appears in
the display. Use the
0
signal early.
Cancelling the timer duration
Press the
button to open the time-setting options
0
menu and turn the time back. Press the
close the menu.
Changing the timer duration
Use the
button to open the time-setting options
0
menu and change the timer time in the next few
seconds using the rotary selector. Start the timer with
the
0
button.
button to cancel the audible
button to
0
- Quick Links:
- Control Panel
Hide quick links:
Advertisement
Table of Contents
