Fujitsu fi-6000NS Operator's Manual page 80

Hide thumbs Also See for fi-6000NS:

Table of Contents

If the new scanner name is the same as another device name already in

use on the network, communication problems will occur. In this case, try

the following steps:

1. Disconnect the LAN cable and turn the scanner off.

2. Reboot the scanner with the LAN cable disconnected, and enter a

non-duplicate scanner name.

3. Reboot the scanner again.

4. Re-connect the LAN cable to the scanner.

The connection will be lost if the scanner name is changed via the network

interface. To continue with other settings, wait a short time for the device to

restart, then login to the network interface again.

Troubleshooting