Displaying Detailed Ais Target Information; Viewing All Ais Targets - Raymarine a65 Operation Instructions Manual
Multifunction display lighthouse ii
Hide thumbs
Also See for a65:
- Operation instructions manual (388 pages) ,
- Installation and operation instructions manual (308 pages) ,
- Owner's handbook manual (100 pages)
Table of Contents
Advertisement
12.9 Displaying detailed AIS target
information
From the chart or radar application:
1. Select an AIS target.
The AIS target context menu is displayed.
2. Select View AIS Data.
AIS Data
The table below shows the AIS target information
which if available will be displayed on the
multifunction display:
• Type
• Status
• Destination
• Last Seen
• ETA
• MMSI
• Call Sign
• IMO No.
• Length
• Beam
• Draught
• Heading
• ROT
• Position
• COG
• SOG
• CPA
• TCPA
Note: Available data is dependant upon what
information is being transmitted from the target
vessel and the type of AIS unit connected to your
system.
AIS function
12.10 Viewing all AIS targets
• From the Chart application with only the AIS
overlay enabled go to: Menu > AIS Options >
Targets > View AIS List
• From the Chart application when the Radar
overlay is also enabled go to: Menu > Radar &
AIS Options > Targets > View Targets Lists >
View AIS List.
• From the Radar application go to Menu > Targets
> View Target Lists > View AIS List.
1. Highlight an AIS target from the list.
When an AIS target is highlighted the following
details are displayed in the list:
• MMSI
• Range
• Bearing
• Buddy
• Type
This list can be filtered to show only buddies or
all targets.
If available the following data is also shown for
the highlighted target:
• SOG
• COG
• ROT
• Position
• Heading
2. To view full AIS target information Select a target
from the list and then select View Full Target
Data.
The AIS target info dialog is displayed showing
all available data for the selected target.
135
- Quick Links:
- Memory Cards and Chart Cards
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
