Related Manuals for Navico BR24
Summary of Contents for Navico BR24
- Page 1 Installation Manual Navico Broadband Radar BR24 English www.lowrance.com www.northstarnav.com. www.simrad-yachting.com Brands by Navico - Leader in Marine Electronics...
-
Page 3: Industry Canada
A shielded cable must be used when connecting a peripheral to the serial ports. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Introduction to the Navico Broadband radar system | 1... - Page 4 1999/5/CE. Por medio de la presente Navico Auckland Ltd. declara que el BR24 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
-
Page 5: Feedback From You
Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected in this version of the manual. Please contact your nearest distributor if you require any further assistance. -
Page 6: Table Of Contents
Contents 1 Introduction to the Navico Broadband radar system ........5 Welcome ..................... 5 What is Broadband radar? ................6 Radar system overview.................. 8 2 Install the radar................... 9 Choose the scanner location ................. 10 Mounting the scanner .................. 11 Mounting the radar interface box .............. -
Page 7: Introduction To The Navico Broadband Radar System
Less than 1/10th the transmitted emissions of a mobile phone, can be safely mounted in proximity to passengers • Compatible with a wide range of Navico multi-function displays and heading sensors Introduction to the Navico Broadband radar system | 5... -
Page 8: What Is Broadband Radar
What is Broadband radar? The Navico Broadband radar uses FMCW (Frequency Modulated Continuous Wave) radar technology. What is FMCW? The current normal leisure radar generates microwave pulses with a thermionic device called a magnetron. This ancient technology transmits bursts of high power microwave energy periodically, and the radar detector listens to the echoes coming back from each pulse. - Page 9 – switch it on and use it. Easy to use • no constant adjusting required to obtain optimum performance • no re-tuning between ranges. Means fast range change at all ranges. Introduction to the Navico Broadband radar system | 7...
-
Page 10: Radar System Overview
- which is what would be required to obtain the same image quality at shorter ranges. The Navico Broadband radar has an effective range from 200 ft to 24 nm and has an operating power consumption of 17 W and stand-by power consumption of 1.6 W. -
Page 11: Install The Radar
2 Install the radar Installation includes: • Mechanical mounting • Electrical wiring • Configuring the display or network system to work with the radar • Adjusting the radar for proper performance Follow these instructions carefully. Don't take any shortcuts! The broadband radar is factory sealed. It is not necessary to remove the cover. Removing the cover will void the factory warranty. -
Page 12: Choose The Scanner Location
0.7 m (3.3 ft). same beam plane as a conventional pulse radar. A pulse radar must be set to STBY or OFF when the BR24 is being operated. If possible ensure that the location site Installations on power boats that have a... -
Page 13: Mounting The Scanner
Mounting the scanner • Use the supplied mounting template and tape it securely to the chosen location site. • Before drilling, check that: you have oriented the mounting template correctly so that the front of the scanner unit will face the front of the vessel the location site is not more than 18 mm (0.7") thick. -
Page 14: Mounting The Radar Interface Box
Mounting the radar interface box • Install the radar interface box (where applicable) in a dry location away from spray, rain, drips and condensation. • The radar interface box must be located where it can be easily connected to the ship's power source, the scanner interconnection cable, and the display or display network. -
Page 15: Wiring The Radar System
3 Wiring the radar system Connect interconnection cable to the scanner The scanner interconnection cable connects the scanner to the RI10 or RI11 interface box (or Lowrance HDS U.S only). The cable connects to the scanner using a 14 pin connector. Protect the connectors when pulling cable through the boat and avoid putting strain on to the connectors. -
Page 16: Connect The Interconnection Cable To Radar Interface Box
Connect the interconnection cable to radar interface box To connect interconnection cable to Lowrance HDS (USA only) (see "Connect the Broadband radar to your display " page 16) 1. Slide (F), (E) and (D) over the RJ45 and data 2. Connect RJ45 and data wires to the radar wires of the scanner interconnection cable (G). - Page 17 Shortening the cable It is not recommended to shorten the cable, but if it is essential, use the pin-out below to re- terminate the RJ45 connector RJ45 Connector RJ45 crimping tool is required Color White/Orange Orange White/Green Blue White/Blue Green White/Brown Brown RJ45 Connector...
-
Page 18: Connect The Broadband Radar To Your Display
Connect the Broadband radar to your display HDS (USA only) Broadband radar scanner Adapter cable Optional Lowrance 5 HDS Display Port Ethernet switch. 000-0127-56 ENET Port 2 m (6 ft) NEP-1 Lowrance broadband radar in the United States does not require a radar interface box. The scanner connects directly the display or Ethernet switch via the adapter cable. -
Page 19: Nx40, Nx45
NX40, NX45 M84, M121 RI11 Data cable NX or M series COMMS port AA010114 RADAR port 3 m (9.8 ft) Connects to NX40/45 or M84/121 via RS232 using the supplied data cable. NX40, NX45 SimNet Heading SimNet heading sensor AT40 or AT45 SimNet to NMEA 0183 NX40 or NX45 converter FC40 or RC42... -
Page 20: Gb40
GB40 RI10 Adapter cable GB40 Ethernet cable 8 port Ethernet linker or GB40 NETWORK (cross-over cable) 000-0127-56 AA010079 NETWORK port port 2 m (6 ft) AA010009 (AA010084) 0.6 m (2 ft) Connects to GB40 system via Ethernet. Connect a GB40 Ethernet cable in between 8 port Ethernet linker (or crossover cable) and supplied adapter cable. -
Page 21: 8000I
8000i 12" Display processor or Black box processor RI11 Adapter cable Ethernet cable 8 port Ethernet linker 8000i (or cross-over cable) NETWORK port 000-0127-56 2 AA010079 NETWORK port m (6 ft) AA010009 (AA010084) 0.6 m (2 ft) Connects to 8000i system via Ethernet. Connect 8000i Ethernet cable in between 8 port linker (or cross- over cable) and supplied adapter cable. -
Page 22: Connect Power
Connect power The Broadband radar can operate on 12 or 24 V DC systems. The Broadband radar requires a +V DC to be applied on the yellow power on wire in order to operate. This can be achieved in one of three ways. •... -
Page 23: Configure Displays To Use Radar
4 Configure displays to use radar Setup and configuration of the Broadband radar has been simplified compared to traditional pulse radars. There is no zero range (time delay), no warm up time, and no burn in required.. The only adjustments needed are: •... -
Page 24: Simrad Gb40 / Northstar 8000I Radar Setup
Simrad GB40 / Northstar 8000i radar setup To set antenna height • Select Pages (Display 8000i) > Setup > Radar. • Press edit and key in the height of the scanner above sea level in feet or meters depending on system units setting. •... -
Page 25: Simrad Nx40/45 Or Northstar M84/M121 Radar Setup
Simrad NX40/45 or Northstar M84/M121 radar setup Your display may need a software upgrade to get full functionality of the Broadband radar. Please contact your dealer for further information. To enable the radar functionality: • Press Setup (NX) or menu twice to display the Setup menu, then select System. •... -
Page 26: Drawings
5 Drawings Scanner dimensions Description Cable entry area Cable retention channel Bolt holes x 4 M8 x 30 mm Breather 24 | Drawings... -
Page 27: Radar Interface Box
Radar interface box Drawings | 25... -
Page 28: Maintenance
6 Maintenance Clean the radome using soapy water and a soft cloth. Avoid using abrasive cleaning products. Do not use solvents such as gasoline, acetone, M.E.K etc. as this will damage the dome surface. After years of use the drive belt may have to be replaced. Transmitter is solid state and will not require regular replacement as with an ordinary magnetron. -
Page 29: Br24 Broadband Radar Scanner Specifications
Simrad GB40 - 10”, 15” Simrad NX40/45 - 8”, 12” Northstar 8000i - 12”, 15” Northstar M84/M121 - 8”, 12” Lowrance HDS - 5”, 7”, 8”. 10" ** Specifications subject to change without notice. BR24 BroadBand radar scanner specifications | 27... -
Page 30: Navico Broadband Radar Part Numbers
5 m (16.4 ft) AA010082 Navico Ethernet cable for GB40 and 8000i 10 m (33 ft) AA010083 Navico Ethernet cross-over cable F/F for GB40 and 8000i 0.3 m (1 ft) 000-00127-28 Navico Ethernet cable E-Yellow-E-Yellow for Lowrance 0.6 m (2 ft) -
Page 31: Rf Exposure Compliance Certificate
RF exposure compliance certificate BR24 BroadBand radar scanner specifications | 29... - Page 32 30 | BR24 BroadBand radar scanner specifications...
- Page 33 BR24 BroadBand radar scanner specifications | 31...
- Page 34 0191...