Table of Contents
Advertisement
Checking the Safety-Interlock
Switches
Service Interval: Before each use or daily
The machine has interlock switches in the electrical system.
These switches are designed to stop the engine when operator
rises from the seat while pressing the traction pedal. However,
the operator may rise from the seat while the engine is
running and the traction pedal is in N
engine will continue to run if the PTO switch is disengaged
and the traction pedal is released, stop the engine before
rising from the seat.
To check the operation of the interlock switches, perform
the following procedure:
1. Drive the machine slowly to a large, relatively open
area. Lower the mower deck, stop the engine, and
apply the parking brake.
2. Sit on the seat and press the traction pedal. Try to start
the engine. The engine should not crank. If the engine
cranks, there is a malfunction in the interlock system
that should be corrected before beginning operation.
3. Sit on the seat and start the engine. Rise from the seat
and move the PTO switch to O
not engage. If the PTO engages, there is a malfunction
in the interlock system that should be corrected before
beginning operation.
4. Sit on the seat, engage the parking brake and start the
engine. Move the traction pedal out of the N
position. The InfoCenter will display "traction not
allowed" and the machine should not move. If the
engine does move, there is a malfunction in the
interlock system that should be corrected before
beginning operation.
During Operation
During Operation Safety
General Safety
•
The owner/user can prevent and is responsible for
accidents that may cause injuries to himself/herself and
others and for damage to property.
•
Wear appropriate clothing, including eye protection;
slip-resistant, substantial footwear; and hearing
protection. Wearing safety shoes and long pants is
advisable and required by some local ordinances and
insurance regulations. Tie back long hair, secure loose
clothing, and do not wear jewelry.
•
Ensure that all drives are in the N
parking brake is engaged, and you are in the operating
position before you start the engine.
•
Keep all body parts, including hands and feet, away from
all moving parts.
. Although the
EUTRAL
. The PTO should
N
EUTRAL
position, the
EUTRAL
28
•
Do not operate the machine while ill, tired, or under the
influence of alcohol or drugs.
•
Keep the direction of the mower discharge away from
people and pets.
•
Do not mow in reverse unless it is absolutely necessary. If
you must mow in reverse, look behind and down for small
children before and while moving the machine in reverse.
Stay alert and stop the machine if a child enters the area.
•
Use extreme care when approaching blind corners,
shrubs, trees, or other objects that may block your view.
•
Do not mow near drop-offs, ditches, or embankments.
The machine could suddenly roll over if a wheel goes
over the edge or if the edge caves in.
•
Never carry passengers on the machine.
•
Operate the machine only in good visibility and
appropriate weather conditions. Do not operate the
machine when there is the risk of lighting.
•
Do not mow on wet grass. Reduced traction could cause
the machine to slide.
•
Never raise the mower deck with the blades running.
•
Stop the machine and inspect the blades after striking an
object or if there is an abnormal vibration in the machine.
Make all necessary repairs before resuming operation.
•
Stop the blades whenever you are not mowing, especially
while crossing loose terrain such as gravel.
•
Slow down and use caution when making turns and
crossing roads and sidewalks with the machine. Always
yield the right-of-way.
•
Turn on the flashing warning lights on the machine
whenever you travel on a public road, except where such
use is prohibited by law.
•
Disengage the drive to the attachment and shut off the
engine before adding fuel and adjusting the height of cut.
•
Reduce the throttle setting before stopping the engine
and, if the engine has a fuel-shutoff valve, shut off the
fuel when you have finished operating the machine.
•
Never run an engine in an area where exhaust gases are
enclosed.
•
Never leave a running engine unattended.
•
Before leaving the operating position, do the following:
– Stop the machine on level ground.
– Disengage the power take-off and lower the
attachments.
– Set the parking brake.
– Shut off the engine and remove the key.
– Wait for all moving parts to stop.
•
Do not change the governor settings on or overspeed
the engine. Operating the engine at excessive speed may
increase the potential for personal injury.
•
Do not use the machine as a towing vehicle.
•
Use accessories and attachments approved by The Toro®
Company only.
Advertisement
Table of Contents
