Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 1. COMPLIANCE OF SAFE REPAIR Be sure to read this Service Manual before providing services. In the projector, full consideration is taken to ensure safety for fire, electric shock, injury, harmful radiation, and substance.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 2-2.DMD Specifications Unit Min. Max. Typical Notes DMD type (DP-2510) TI 0.55" SVGA 12 deg LVDS Number of Columns (DP-2510) Pixel Number of Rows (DP-2510) Pixel DMD type (DP-3510) TI 0.55" XGA 12 deg LVDS...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 2-6. I/O Ports Illustration about Projector ABEL ESCRIPTION AC IN Connect the power cord Rear IR receiver Receiver for IR signal from remote control (Optional) USB (Service Only) Connect the USB cable from a computer (service only)
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 2-7. Remote Control Parts Important: 1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluorescent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the remote control and the projector. If the path between the remote control and the projector is obstructed, you can bounce the signal off certain reflective surfaces such as projector screens.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 ABEL ESCRIPTION Up cursor Navigates and changes settings in the OSD Enter Changes settings in the OSD Power Turns the projector On or Off Right cursor Navigates and changes settings in the OSD...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 2-8. Key Pad Top view—On-screen Display (OSD) buttons and LEDs ABEL ESCRIPTION Turns the projector On or Off (POWER) ▲ (Up cursor) Navigates and changes settings in the OSD LED Green still on stand-by mode LED Flashing Green off 2.5s / on 1s...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 2-9. Bottom view ABEL ESCRIPTION Lamp cover Remove when changing the lamp. Lens cap hook To fasten the lens cap cover. Tilt adjustor Rotate adjuster lever to adjust angle position. Height adjustor button Push to release adjustor.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 2.10 Projector and Remote Control Buttons The projector can be operated using the remote control or the buttons on the top of the projector. All operations can be carried out with the remote control; however, the buttons on the projector are limited in use.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 2.11 Adjusting the Zoom, Focus and Keystone Use the Image-zoom control (on the projector only) to resize the projected image and screen size Use the Image-focus control (on the projector only) to sharpen the...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 2.12 Adjusting the Volume Press the VOLUME +/- buttons on the remote control. The volume control appears on the display. Press the Down Cursor button on the keypad to adjust Volume +/-.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 3. TROUBLE SHOOTING v1.1 By checking operations during normal usage time, it is possible to carry out judgments on malfunction to a certain extent. Carry out the following checks before disassembling the equipment.
Page 19
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Turn the power ON The lamp is ON •Thermal Break Sensor error POWER: Blinks •Thermal Break Sensor disconnected. Lamp does not light:lighting operation sound (ignition sound) POWER: Blink exists. • Main Board and Ballast Board Ass’y malfunction •...
Page 20
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Image Display • CW Sensor Board Ass’y malfunction Projector logo • Main Board Ass’y malfunction screen display • DMD Set malfunction Confirmation with none-signal state • Lamp deterioration (malfunction/usage time) Still dark after the •...
Page 21
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Check the projection Screen Check using all black/white screens with PC connection • Black lines on screen (horizontal and vertical) → DMD Set malfunction Are abnormalities noticeable on • Missing pixels (Missing white: 1 or more, missing black: 5 or more, or...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Common problems and solutions These guidelines provide tips to deal with problems you may encounter while using the projector. If the problem remains unsolved, contact your dealer for assistance. Often after time spent troubleshooting, the problem is traced to something as simple as a loose connection.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Problem: The image is streaked 1. Set the Frequency and Tracking settings on the Computer menu of the OSD to the default settings. 2. To ensure the problem is not caused by a connected PC’s video card, connect to another computer.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Remote Control Problems Problem: The projector does not respond to the remote control 1. Direct the remote control towards remote sensor on the projector. 2. Ensure the path between remote and sensor is not obstructed.
Page 25
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Peripheral Test ESCRIPTION Remote Control Press (Enter) / ► to test the IR remote controller for diagnostic. Test (Enter) / ► to test the button on keypad. Button Test Press Press (Enter) / ►...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 4.DISASSEMBLY AND ASSEMBLY Removing the Lamp Cover and Lamp Module Look the full set projector. Look at the IO side. Look at the keypad of top side. Look at the keypad of top side.
Page 27
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Removing the Lamp Cover and Lamp Module Look at the top side. Loose these two screws and take out. Look the Lamp #1. Remove the lamp modules (upward view). Look the Lamp #2.
Page 28
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Removing the Lamp Module and Top Cover Look the Lamp #4. Remove the three screws. Look the screws (S01). Remove the two screws. Remove the screw and top cover. Look the screws(S02).
Page 29
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Removing the Top Cover and Keypad Board Look at the keypad and set side. Look at the FFC cable. Remove the two screws and Remove the Keypad board. Keypad board take off.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Removing the Main Board Full set review. Remove the 8 piece screws. Look the screws(S04). Remove the two hexagonal screws. Look the screws(S05). Careful this area and check this place when you assemble this plate.
Page 31
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Main Board Review Careful this area and check this place when you assemble this plate. Main Board Review #Top side Company Confidential LGE_______________________ Delta____________ 2007/11/30...
Page 32
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Main Board Review Main Board Review #Bottom side Company Confidential LGE_______________________ Delta____________ 2007/11/30...
Page 33
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Removing the Power Board Review the IO plant. Remove the screw and connector lets the power board (LVPS unit) take off. Review the power board (LVPS unit) Remove the front case.
Page 34
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Removing the Front Case & Removing the Top Cover Shield Review the front case and set. Remove the four screws(S08-2 & S08-1). Review the Shield plant. Review these four screws. Remove the two screws and lets the Remove the screw (S10).
Page 35
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Removing the Fans Module Review the fan module and screws. Remove the screw and fan module (S11). Remove the two screws. Arrange the wires as picture when you assemble it. Take off the Fan module and review the Remove the four screws and replace the screws (S12).
Page 36
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Removing the Optical Engine & Power Board Remove the Three screws and take off Review the three screws (S14). the optical module. Review the optical module #1. Review the optical module #2.
Page 37
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Removing the Power Board Remove the two screws (S18). Remove the two screws (S19). Review the four screws. Review the power module (Ballast) #1. Review the power module (Ballast) #2. Review the Buttom case.
Page 38
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Removing the IR Board / Adj Foot / Speak Module / Inter-lock switch / Lens Cap Remove the three screws and replace Remove the screw and replace the the IR board and Adj foot (S20/21).
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 5. Flash Upgrade Flow 5-1. Projector USB Drivers Installation Guide Ver 6.0.0.4 The document is to describe a Windows application software “Flash-Tool” for projector firmware. Its main purpose is to provide a detailed procedure of upgrading the application software of a DLP projector. The system requirement and the installation procedure of “Flash-Tool”...
Page 41
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Driver Destination: Click on the “Change” button to change the default directory for saving the driver file somewhere else. Click on the “Back” button to return to the previous page Click on the “Cancel” button to cancel the...
Page 42
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Installation Completed: Click on the “Finish” button with the “Launch” checkbox checked so that the Install Wizard will start the USB driver (INF update. Launch the driver update Note: The USB driver (INF) update may take a few minutes depending your computer’s performance, and number of driver files.
Page 43
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 The Install Wizard is searching for the old driver files to be replaced with the new ones. Remove the USB cable between PC and projector if it is connected. The WinDrive USB drivers will be installed and registered to the system.
Page 44
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Make sure that the USB cable is firmly connected between projector and computer Connect the power cord to the projector, and move the power switch in its ON position (if available) so that projector is in the STAND-BY mode.
Page 45
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Windows completes the new hardware wizard. Press the “Finish” button to exit. Note: In case that you has USB enumeration problem (i.e., the USB port cannot recognize your projector), please clear all USB items in the windows registry, and re-install the Flash-Tool USB driver.
Page 46
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 The Windows New Hardware Wizard will launch again for the second USB Projector Control. Select “No, not this time” Click on the “Next” button to continue Select “Install the software automatically”...
Page 47
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 The New Hardware Wizard launches, and Windows detects a new USB device attached. Select “No, not this time” Click on the “Next” button to continue Select “Install the software automatically” Click on the “Next” button to continue * In case the wizard cannot find the driver (the ProjectorControl.inf),...
Page 48
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Windows completes the new hardware wizard. Press the “Finish” button to exit Congratulations! Power off the projector now Your driver has been checked and works for Flash-Tool. Company Confidential LGE_______________________ Delta____________...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Appendix-A How to clear the USB enumeration registry? Run “regedit” and select the following items HKEY_LOCAL_MACHINE->SYSTEM->CurrentControlSet->Enum->USB-> The E400/AV/DP2601 VID_1501&Pid_2601xxx The AV/DP2618 series VID_1501&Pid_2618xxx The AV/DP3618 series VID_1501&Pid_3618xxx The DP3602 series VID_1501&Pid_3602xxx The DP3616 series VID_1501&Pid_3616xxx...
Page 50
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Company Confidential LGE_______________________ Delta____________ 2007/11/30...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Appendix-B Projector USB status on Windows Device Manager The USB HID device will be installed automatically via Windows' USB hot-plug mechanism. The Projector Control will be dynamically installed after entering the maintenance mode (Press <down>, <up>, <right>, <up>...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 5-2. DLP Projector Flash-Tool (firmware) User Guide Ver 6.0.0.4 The document is to describe a Windows application software “Flash-Tool” for projector firmware. Its main purpose is to provide a detailed procedure of upgrading the application software of a DLP projector. The system requirement and the installation procedure of “Flash-Tool”...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 5-3. Start with Flash-Tool The section is to illustrate the procedure to upgrade the application software of a DLP projector. Step 1: Launch the “FlashTool.exe” from installed shortcut at Program > Digital Zoom Projector> Launch FlasTool.exe or click on the “Launch FlashTool.exe” shortcut icon on the desktop.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Step 2: Make sure that the USB cable is firmly connected between projector and computer Step 3: Connect the power cord to the projector, and move the power switch in its ON position (if available) so that projector is in STAND BY mode.
Page 55
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Note: The Flash-Tool will validate the signature of the binary image file for upgrading. The “Start” button will not enable if the binary image is not a valid projector firmware. The “Start” button Step 6: Press the “Start”...
Page 56
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Caution: DO NOT install any USB driver when erasing or upgrading process started. Note: According to the Flash technology, the old firmware will be erased first. Therefore, Flash-Tool will automatically erase the old firmware before upgrading.
Page 57
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Note: After the new firmware is upgraded, the Flash-Tool will perform the final validation. The dialog shows the checksum with a verification message! Checksum verified Step 8: When the validation is completed, turn off the projector. Next time when the projector is on, it will execute the new firmware.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 5-4. Starting and Shutting down the Projector Connect the power cord to the projector. Connect the other end to a wall outlet. POWER and READY LEDs on the projector light. Turn on the connected devices.
Page 59
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 If more than one input device is connected, press the SOURCE button and use ▲▼ to scroll among devices. (Component is supported through the RGB to COMPONENT ADAPTER.) • RGB: Analog RGB...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 5-5. Setting an Access Password (Security Lock) You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector. When enabled, the password must be entered after you power on the projector.
Page 61
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Press the cursor ▲▼ button to select Security Lock. Press the cursor ◄► button to enable or disable security lock function. A password dialog box automatically appears. You can use the cursor buttons ▲▼◄►...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 5-6. Factory Reset Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the Factory Reset sub menu and press (Enter) / ► to reset all the menu items to the factory default values.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 5-7. Status Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the Installation II sub menu and press (Enter) / ► to enter the Status sub menu.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 6. Color Wheel Index, DMD Contrast and Brightness Adjustment @ RGB source A. Switch Timing to ”1024x768 @ 60HZ” B. To turn on the OSD screen, and into “Lamp Hour Reset Page”...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 7. Color Border Adjustment Step 1 : Adjust integration rod screw to eliminate color edge @ White pattern 1. Adjust the hexagonal screw in order to right and lift side color border disappeared.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 8. Projection Lamp 8-1.Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be replaced with a certified replacement part, which you can order from your local dealer.
Page 67
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Remove the two screws from the lamp module (A). Lift the module handle up (B). Pull firmly on the module handle to remove the lamp module. Company Confidential LGE_______________________ Delta____________ 2007/11/30...
Page 68
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Reverse steps 1 to 5 to install the new lamp module. While installing, align the lamp module with the connector and ensure it is level to avoid damage. Note: The lamp module...
Page 69
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 8-2 Resetting the Lamp After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installation II menu.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 9. Cleaning 9-1. Cleaning the Projector Cleaning the projector to remove dust and grime will help ensure trouble-free operation. 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 10. SERVICE NOTE 10-1. Cleaning Carry out cleaning of the main unit and interior when replacing the lamp or making inspections. The glass cleaner used with the following parts is as follows.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 10-2. Inserting the Remote Control Batteries Remove the battery compartment cover by sliding the cover in the direction of the arrow. (A) Pull out the cover. (B) Insert the battery with the positive side facing up.
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 10-3. Power & READY LED Blink Code Message LED Error Messages OWER EADY RROR ESSAGES LINK LINK Over temperature Thermal break status error Lamp error Fan1 error Fan2 error Fan3 error...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 10-4. Factory Preset Display Modes The projector can display several resolutions. The following table outlines the resolutions that can be displayed by the projector. H-Sync V-Sync Composite / Signal Resolution Component...
Page 75
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 H-Sync V-Sync Composite / Signal Resolution Component (KHz) (Hz) S-Video - - ○ 1280 x 1024 63.98 60.0 - - ○ 1280 x 1024 79.98 75.0 - - ○ 1400 x 1050 65.3...
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 11. EDID Data A. DS325-JD (DP-2510 YY DA) __________________________________________________________________________ __________________________________________________________________________ EDID Version # 1, Revision # 3 DDCTest For : GSM DS325-JD __________________________________________________________________________ __________________________________________________________________________ 128 BYTES OF EDID CODE : ________________________________________...
Page 77
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 (08-09) ID Manufacturer Name ________________ = GSM (11-10) Product ID Code _____________________ = 0101(Hex), 257(Dec) (12-15) Last 5 Digits of Serial Number ______ = 16843009(Dec), 01010101(Hex) (16) Week of Manufacture _________________ = 1...
Page 78
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 720 X 400 @ 70Hz (IBM,VGA) 640 X 480 @ 60Hz (IBM,VGA) 640 X 480 @ 67Hz (Apple,Mac II) 640 X 480 @ 72Hz (VESA) 640 X 480 @ 75Hz (VESA)
Page 79
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Horizontal : Active Time : 800 pixels Blanking Time 256 pixels Sync Offset : 40 pixels Sync Pulse Width : 128 pixels Border 0 pixels Vertical : Active Time : 600 lines...
Page 80
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 B. DX325-JD (DP-3510 YY DA) __________________________________________________________________________ __________________________________________________________________________ EDID Version # 1, Revision # 3 DDCTest For : GSM DX325-JD __________________________________________________________________________ __________________________________________________________________________ 128 BYTES OF EDID CODE : ________________________________________ 0 | 00 FF FF FF FF FF FF 00 1E 6D...
Page 81
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 (08-09) ID Manufacturer Name ________________ = GSM (11-10) Product ID Code _____________________ = 0101(Hex), 257(Dec) (12-15) Last 5 Digits of Serial Number ______ = 16843009(Dec), 01010101(Hex) (16) Week of Manufacture _________________ = 1...
Page 82
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 720 X 400 @ 70Hz (IBM,VGA) 640 X 480 @ 60Hz (IBM,VGA) 640 X 480 @ 67Hz (Apple,Mac II) 640 X 480 @ 72Hz (VESA) 640 X 480 @ 75Hz (VESA)
Page 83
Delta Elec. Inc. DP-3510 YYDA & DP-2510 YYDA rev.00 Horizontal : Active Time : 1024 pixels Blanking Time 320 pixels Sync Offset : 24 pixels Sync Pulse Width : 136 pixels Border 0 pixels Vertical : Active Time : 768 lines...