Installing the TV to the Wall
Using the supplied Wall-Mount Bracket (XBR-65/55X930D only)
To Customers
Sufficient expertise is required for installing this product. Be sure to subcontract the installation to
Sony dealers or licensed contractors and pay special attention to safety during the installation.
Sony is not liable for any damages or injury caused by mishandling or improper installation, or
installing any other than the specified product. Your Statutory Rights (if any) are not affected.
To Sony Dealers and Contractors
Sufficient expertise is required for installing this product. Be sure to read this instruction manual
thoroughly to do the installation work safely. Sony is not liable for any damages or injury caused
by mishandling or improper installation.
Your TV can be mounted on a wall using a Wall-Mount Bracket (supplied with the TV) out of
the box as packaged.
Prepare the TV for the Wall-Mount Bracket before making cable connections.
For product protection and safety reasons, Sony strongly recommends that you use the
Wall-Mount Bracket (supplied with the TV) designed for your TV and the installation
should be performed by a Sony dealer or licensed contractor.
• Follow the instructions provided in the supplied Wall-Mount Bracket Installation
Guide for installing the Wall-Mount Bracket. Sufficient expertise is required in
installing this TV, especially to determine the strength of the wall for withstanding the
TV's weight.
• Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the
Wall-Mount Bracket to the TV set.
The supplied screws are designed as indicated by illustration when measured from
the attaching surface of the Wall-Mount Bracket.
• The diameter and length of the screws differ depending on the Wall-Mount Bracket
model. Use of screws other than those supplied may result in internal damage to the
TV set or cause it to fall, etc.
7 mm
Screw
Wall-Mount Bracket
TV's rear cover
Note
• Read the supplied Safety Booklet for additional safety information.
• See page 3 (Safety Information) and page 7 (Precautions) on WALL-MOUNT BRACKET before carrying out
Wall-Mount Bracket installation.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the
original holes on the rear of the TV.
• Make sure that the wall has enough space for the TV and is capable of supporting a weight of at least four
times that of the TV. See page 22-24 (Specifications) for the TV's weight.
For instructions on Wall-Mount Bracket installation of your TV model, refer to the supplied Wall-Mount
Bracket Installation Guide.
US
15
US