Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for LG LB52 Series
Summary of Contents for LG LB52 Series
- Page 1 OWNER’S MANUAL LED TV *LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your set and retain it for future reference. LN510* LN511* LN512* LN513* LN515* LN49** LB53** LB52** *MFL67710803* www.lg.com P/NO : MFL67710803 (1407-REV09)
-
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS CUSTOMIZING TV SETTING Accessing main menus Customizing Settings - SETUP Settings SAFETY INSTRUCTIONS - PICTURE Settings - AUDIO Settings - TIME Settings INSTALLATION PROCEDURE - OPTION Settings - LOCK Settings ASSEMBLING AND PREPARING TELETEXT Unpacking Switch On/Off Parts and buttons... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product. WARNING y Make sure to connect Mains cable y Do not place the TV and/or remote control to compliant AC mains socket with in the following environments: Grounded earth pin. - Page 4 SAFETY INSTRUCTIONS y When mounting TV onto wall make sure y Dispose of used batteries carefully to neatly install and isolate cabling from to ensure that a small child does not rear of TV as to not create possibility of consume them.
- Page 5 SAFETY INSTRUCTIONS y Do not allow any impact, shock or any y Unplug the TV from AC mains wall socket objects to fall into the unit, and do not if you do not intend to use the TV for a drop anything onto the screen.
- Page 6 SAFETY INSTRUCTIONS y If you install the TV on a stand, you need y Do not place non-rechargeable batteries to take actions to prevent the product in charging device. from overturning. Otherwise, the product may fall over, which may cause injury. y Make sure there are no objects between the remote control and its sensor.
- Page 7 SAFETY INSTRUCTIONS y Take care not to touch the ventilation y When cleaning the product and its openings when watching the TV for long components, unplug the power first periods as the ventilation openings may and wipe it with a soft cloth. Applying become hot.
- Page 8 SAFETY INSTRUCTIONS y Contact the service centre once a year to y You may find different brightness and clean the internal parts of the product. colour of the panel depending on your Accumulated dust can cause mechanical viewing position(left/right/top/down). failure. This phenomenon occurs due to the characteristic of the panel.
-
Page 9: Installation Procedure
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING NOTE y Image shown may differ from your TV. y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. y The available menus and options may differ from the input source or product model that you are using. - Page 10 ASSEMBLING AND PREPARING Remote control and Owner’s manual Cable holder batteries (AAA) (Depending on model) (See p.24) (See p.19) Power Cord Stand Screws Stand Screws 3EA, P5 x L25 4EA, P5 x L25 4EA, M4 x L14 4EA, M4 x L14 (Only LN510*, LN511*, (Only LN515*) LN512*, LN513*, LN49**,...
-
Page 11: Parts And Buttons
ASSEMBLING AND PREPARING Parts and buttons Screen SETTINGS INPUT Remote control sensor Power indicator Buttons Speakers Button Description Scrolls through the saved programmes. Adjusts the volume level. Selects the highlighted menu option or confirms an input. Accesses the main menu, or saves your input and exits the menus. Changes the input source. -
Page 12: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and moving the TV y When transporting a large TV, there should be at least 2 people. Please note the following advice to prevent the y When transporting the TV by hand, hold the TV from being scratched or damaged and for TV as shown in the following illustration. -
Page 13: Setting Up The Tv
ASSEMBLING AND PREPARING Setting up the TV LN515* Image shown may differ from your TV. Stand Body Attaching the stand LN510*, LN511*, LN512*, LN513*, LN49**, LB53**, LB52** Stand Base P5 x L25 Stand Body P5 x L25 Stand Base M4 x L14 M4 x L14... -
Page 14: Mounting On A Table
ASSEMBLING AND PREPARING Securing the TV to a table CAUTION Fix the TV to a table to prevent from tilting y When attaching the stand to the TV forward, damage, and potential injury. set, place the screen facing down on a To secure the TV to a table, insert and tighten cushioned table or flat surface to protect the supplied screw on the rear of the stand. - Page 15 ASSEMBLING AND PREPARING Securing the TV to a wall WARNING (This feature is not available for all models.) y If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: »...
-
Page 16: Mounting On A Wall
We recommend the use of LG’s wall mount bracket. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. -
Page 17: Attaching The Shelf Stand
ASSEMBLING AND PREPARING Attaching the shelf stand Image shown may differ from your TV. - You can use the shelf stand by putting STB (Set top box). LN515* Stand Body Stand Base M4 x L8 M4 x L8 CAUTION y Make sure that the screws are inserted correctly and fastened securely. -
Page 18: How To Attach To Masonry Walls
ASSEMBLING AND PREPARING Wall mount anchor Shelf Stand (Set top box) Shelf Stand conditions of use STB Dimensions (W x D) 350mm x 150mm STB Weight 2.5kg Maximum supported 3.5kg weight Wall mount screw How to attach to masonry walls (This feature is not available for all models.) Use the anchors for wall material of concrete, light concrete, strong natural stone, soft natural... -
Page 19: Tidying Cables
ASSEMBLING AND PREPARING Tidying cables Use Cable Holder to neatly secure and position cables together. Cable Holder CAUTION y Do not move the TV by holding the cable holder, as the cable holders may break, and injuries and damage to the TV may occur. -
Page 20: Making Connections
MAKING CONNECTIONS MAKING CONNEC- Antenna connection TIONS Connect the TV to a wall antenna socket with an RF cable (75 Ω). This section on MAKING CONNECTIONS mainly uses diagrams for the LN510* models. Connect various external devices to the TV and switch input modes to select an external device. -
Page 21: Hdmi Connection
MAKING CONNECTIONS HDMI connection Component connection Transmits the digital video and audio signals Transmits analogue video and audio signals from an external device to the TV. Connect the from an external device to the TV. Connect the external device and the TV with the HDMI cable external device and the TV with a component as shown. -
Page 22: Composite Connection
MAKING CONNECTIONS Composite connection USB connection Transmits analogue video and audio signals Connect a USB storage device such as a USB from an external device to the TV. Connect the flash memory, external hard drive, or a USB external device and the TV with the composite memory card reader to the TV and access the cable as shown. -
Page 23: Audio System Connection
MAKING CONNECTIONS Audio System connection Use an external audio system instead of the built-in speaker. NOTE y If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off. External Stereo Connection Use to connect to an external amplifier, or sur- round sound system. -
Page 24: Remote Control
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. -
Page 25: Watching Tv
WATCHING TV WATCHING TV NOTE y If you do not complete the Initial setting, it will appear whenever the TV turns on. Turning the TV on for the y Disconnect the power cord from the power first time outlet when you do not use the TV for a long period of time. -
Page 26: Manually Setting Up Programme
WATCHING TV Manually setting up pro- Assigning a station name gramme You can assign a station name with five Manual Tuning lets you manually tune and ar- characters to each programme number. range the stations in whatever order you desire. Press SETTINGS and the Navigation Press SETTINGS and the Navigation buttons to scroll to SETUP. -
Page 27: Editing Your Programme List
WATCHING TV Editing your programme list Using additional options When a programme number is skipped, it means Adjusting aspect ratio that you will be unable to select it using P button during TV viewing. Resize an image to view at its optimal size by If you wish to select the skipped programme, pressing Q.MENU or accessing Aspect Ratio in directly enter the programme number with the... -
Page 28: Using The Input List
WATCHING TV Using the input list 4:3: Resizes images to the previous standard 4:3. Selecting an input source Press INPUT to access the input sources. - The connected device displays on each input source. Press the Navigation buttons or input button to scroll to one of the input sources and 14:9 : You can view a picture format of 14:9 or a general TV programme in the 14:9... -
Page 29: Entertainment
ENTERTAINMENT ENTERTAINMENT Tips for using USB storage devices y Only a USB storage device is recognizable. y If the USB storage device is connected (Depending on model) through a USB hub, the device is not recognizable. y A USB storage device using an automatic y Image shown may differ from your TV. -
Page 30: Browsing Files
ENTERTAINMENT Browsing files Description Moves to the upper level folder. Access the photo, music, or movie lists and Preview: Displays the thumbnail/folder browse files. name of the file in the selected folder. Connect a USB storage device. Current page/Total pages Press SETTINGS to access the main Total number of marked files menus. -
Page 31: Viewing Photos
ENTERTAINMENT Viewing photos The following options are available while View image files saved in a USB storage device. viewing photos. The displays on the screen may differ from the model. Press SETTINGS to access the main menus. Press the Navigation buttons to scroll to USB and press OK Press the Navigation buttons to scroll to PHOTO LIST and press OK... -
Page 32: Listening To Music
ENTERTAINMENT Set video. Pauses or resumes playback Allows you to change Video presets. (See p.37). Skips to the next file Set audio. Skips to the previous file Allows you to change Audio presets. (See p.39). When playing, When you press the button, Listening to music the previous music file will be... -
Page 33: Viewing Movies
ENTERTAINMENT Viewing movies Button Description Press SETTINGS to access the main Stops the playback. menus. Press the Navigation buttons to scroll to Plays a video. USB and press OK Press the Navigation buttons to scroll to Pauses or resumes the playback. MOVIE LIST and press OK Press the Navigation buttons to scroll to a Scans backward in a file. - Page 34 ENTERTAINMENT y Max bitrate of playable movie file is 20 Subtitle Turns on/off the subtitle. Mbps. (only, Motion JPEG : 10 Mbps) y We do not guarantee smooth playback Language Activated for SMI subtitle and of profiles encoded level 4.1 or higher in can select the language within H.264/AVC.
-
Page 35: Divx ® Vod Guide
ENTERTAINMENT DivX VOD Guide ® ® DivX VOD Deregistration You should deregister your device with 8 digit DivX deregistration code from your device at ® DivX VOD Registration www.divx.com/vod. ® In order to play purchased or rented DivX contents, you should register your device with 10 NOTE digit DivX registration code from your device at y Once the deregistration is executed, you... -
Page 36: Customizing Tv Setting
CUSTOMIZING TV SETTING CUSTOMIZING TV SETTING Customizing Settings y Image shown may differ from your TV. SETUP Settings Press SETTINGS and the Navigation Accessing main menus buttons to scroll to SETUP. Press the Navigation buttons to scroll to the Press SETTINGS to access the main setting or option you want and press OK menus. -
Page 37: Picture Settings
CUSTOMIZING TV SETTING PICTURE Settings Setting Description Picture Selects one of the preset image Press SETTINGS and the Navigation buttons to scroll to PICTURE. Mode or customizes options in each Press the Navigation buttons to scroll to the mode for the best TV screen setting or option you want and press OK performance. - Page 38 CUSTOMIZING TV SETTING Basic image options Advanced image options (Depending on model) Setting Description Setting Description Backlight Adjusts the brightness of Dynamic Contrast Adjusts the contrast to keep it at the best level the screen by controlling according to the brightness the LCD backlight.
-
Page 39: Audio Settings
CUSTOMIZING TV SETTING AUDIO Settings model) Setting Description Press SETTINGS and the Navigation Sound Mode Selects one of the preset sound modes or customizes options in buttons to scroll to AUDIO. each mode. Press the Navigation buttons to scroll to the setting or option you want and press OK Mode e is... - Page 40 CUSTOMIZING TV SETTING This feature may not be applied based on Speaker Sound Output Selection country broadcasting circumstance. In AV, Component, HDMI mode, you can select output sound for the left and right loudspeakers. Select the sound output. Stereo/Dual Reception L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal...
-
Page 41: Time Settings
CUSTOMIZING TV SETTING TIME Settings OPTION Settings Press SETTINGS and the Navigation Press SETTINGS and the Navigation buttons to scroll to TIME. buttons to scroll to OPTION. Press the Navigation buttons to scroll to the Press the Navigation buttons to scroll to the setting or option you want and press OK setting or option you want and press OK When you return to the previous menu,... -
Page 42: Lock Settings
CUSTOMIZING TV SETTING / TELETEXT TELETEXT LOCK Settings Press SETTINGS and the Navigation buttons to scroll to LOCK. y This feature is not available in all coun- Press the Navigation buttons to scroll to the tries. setting or option you want and press OK Teletext is a free service broadcast by most TV When you return to the previous menu, stations which gives up-to-the minute informa-... -
Page 43: Programming A Colour Button In List Mode
TELETEXT Special Teletext Function Programming a colour button in LIST mode Index If the TV is in SIMPLE text or FASTEXT mode, press the INDEX button to switch to LIST mode. Select the each index page. Four teletext page numbers of your choice can be colour coded and easily selected by pressing Time the corresponding coloured button on the remote... -
Page 44: Maintenance
MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first. y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. -
Page 45: Specifications
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. 32LN510* 39LN510* 42LN510* MODELS 32LN5100-TA 39LN5100-TA 42LN5100-TA 32LN510Y-TA 39LN510Y-TA 42LN510Y-TA With stand (mm) 738.0 x 497.0 x 207.0... - Page 46 SPECIFICATIONS 32LN515* 32LN49** 32LB53** 32LN4900-TD 32LN5150-TA 32LN490Y-TD MODELS 32LN5150-TL 32LN4910-TF 32LB530A-TA 32LN515Y-TA 32LN491Y-TF 32LN515Y-TL 32LN4920-TA With stand (mm) 738.0 x 497.0 x 212.0 738.0 x 497.0 x 207.0 738.0 x 497.0 x 207.0 Dimensions (W x H x D) Without stand(mm) 738.0 x 449.0 x 79.0 738.0 x 449.0 x 79.0 738.0 x 449.0 x 79.0 With stand (kg)
- Page 47 SPECIFICATIONS HDMI-DTV supported mode Component port connecting information Horizontal Vertical Component ports on the Resolution Frequency Frequency (kHz) (Hz) 31.469 59.94 720 x 480 31.5 Video output ports on 720 x 576 31.25 DVD player 37.5 1280 x 720 44.96 59.94 33.72 59.94...
-
Page 48: Licenses
LICENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. - Page 49 (Only Jordan) WEEE Disposal of your appliance The symbol indicating separate collection for electrical and electronic equipment con- sists of the crossed-out wheeled bin.
- Page 50 Refer to the label on the back cover and 19960 in Egypt quote this information to your dealer 021 36 54 54 in Algeria when requiring any service. Other countries, Please contact our MODEL local dealer or log into http://www.lg.com SERIAL...
- Page 51 OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
-
Page 52: Note
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button... - Page 53 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
- Page 54 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
- Page 55 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
- Page 56 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 57 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
- Page 58 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
- Page 59 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
- Page 60 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
- Page 61 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
- Page 62 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]...