Table of Contents
Advertisement
Item
LED
4
Drive status
Systems Insight Display LED combinations
When the health LED on the front panel illuminates either amber or red, the server is experiencing
a health event. Combinations of illuminated Systems Insight Display LEDs, the system power LED,
and the health LED indicate system status.
Table 1 Systems Insight Display LEDs and internal health LED combinations
Systems Insight
Display LED and
color
Processor (amber)
DIMM (amber)
Over temp (amber)
PCI riser (amber)
Fan (amber)
Power supply
(amber)
Status
Off
Solid green
Flashing green
Flashing amber/green
Flashing amber
Solid amber
Off
Health LED
System power LED
Red
Amber
Amber
Green
Red
Green
Amber
Green
Amber
Green
Red
Amber
Red
Green
Amber
Green
Red
Green
Red
Amber
Amber
Green
Definition
Removing the drive does not cause a logical drive to fail.
The drive is a member of one or more logical drives.
The drive is rebuilding or performing a RAID migration,
stripe size migration, capacity expansion, or logical drive
extension, or is erasing.
The drive is a member of one or more logical drives and
predicts the drive will fail.
The drive is not configured and predicts the drive will fail.
The drive has failed.
The drive is not configured by a RAID controller.
Status
One or more of the following conditions may exist:
Processor in socket X has failed.
Processor X is not installed in the socket.
Processor X is unsupported.
ROM detects a failed processor during POST.
Processor in socket X is in a pre-failure condition.
One or more DIMMs have failed.
DIMM in slot X is in a pre-failure condition.
The Health Driver has detected a cautionary temperature
level.
The server has detected a hardware critical temperature
level.
The PCI riser cage is not seated properly.
One fan has failed or is removed.
Two or more fans have failed or are removed.
One or more of the following conditions may exist:
Only one power supply is installed and that power
supply is in standby.
Power supply fault
System board fault
One or more of the following conditions may exist:
Redundant power supply is installed and only one
power supply is functional.
AC power cord is not plugged into redundant power
supply.
Hardware components
13
Advertisement
Table of Contents
