Wireless Network Access Setup (For W Series Only); Wireless Router Setup - ICRealtime F SERIES User Manual

Hide thumbs Also See for F SERIES:

Table of Contents

8 Wireless Network Access Setup (For W Series Only)

Please note this chapter is for W series only.

Please follow the steps listed below for wireless router setup. The following setup interface is

based on TL-WR340G/TL-WR340GD 54M Wireless Router. See Figure 8-1.

Please modify your PC IP address so that your PC is in the same segment of the wireless

router. Please make sure you can access the wireless router.

Open the wireless router setup interface. The SSID is the ID of the wireless router in the

network. You can input a self-defined name for your reference.

Please check the box to enable wireless security function and then select WEP security type.

It includes WEP64 bit and WEP128bit. The WEP key format can be ASCII or hex. Finally

you can set the detail WEP encryption password. These passwords are for you go login the

wireless router. System max supports 4 groups. You can skip current step if your wireless

router does not support encryption function.

Click save button to save current setup.

Check the box here to

enable security function.

Right now our device

supports WEP type only.

WEP key format supports

HEX and ASCII.

Input four key groups

here.

Table of Contents