Page 3
He pushed technological boundaries to the limit to create the kind of subwoofer he could live with. Earthquake quickly created a name for itself in the car audio industry and became well known for its powerful subwoofers and amplifiers.
Page 4
Introduction DJ-Quake 2.1 System is a portable speaker system that consists of two 4 x 4-inch array speakers and one 12-inch subwoofer with a built-in 1000-Watt amplifier (400 Watts RMS). The amplifier features balanced and unbalanced line inputs, as well as a digital media player with USB/SD and Bluetooth inputs.
Page 5
DJ- Quake 2.1 system. It is important to read this owner’s manual before attempting to use this product. Pay particular attention to the safety instructions. Specifications are subject to change without notice. DJ-Quake 2.1 Manual...
Use this 3.5mm unbalanced stereo input to power source and its main power switch is connect the DJ-Quake 2.1 system to a in the ON position. computer, mobile device, etc.
Page 7
115/230V AC SELECTOR notch and pry it open. The DJ-Quake 2.1 system can operate in a 115V or 230V environment. Before PASSIVE SUB LINK connecting the DJ-Quake to a power...
Press this button to select songs by 10 digit numbers. Press this button to select songs by 100 digit numbers. Press these number buttons to select the MP3 files. DJ-Quake 2.1 Manual Earthquake Sound Corp. | (800) 576-7944 | www.earthquakesound.com...
Page 9
CONNECTING THROUGH AUXILIARY INPUT One of the easiest and quickest connection to the DJ-Quake 2.1 system is through the auxiliary input. Any device with a 3.5mm connection may be connected into the DJ-Quake 2.1 system and used as the primary source.
Page 10
CONNECTING THROUGH RCA INPUT & ADDING MICROPHONE VIA XLR INPUT To add a microphone into the DJ-Quake 2.1 system, simply connect it to the amplifier via the XLR / 1/4” TRS input. This will enable you to use the auxiliary/RCA input and the microphone simultaneously.
Page 11
ADDING SUBWOOFER & SPEAKER TO THE SYSTEM Giving the system’s performance an extra boost of sound and bass is easy with the DJ-Quake 2.1 system. When the source is connected to the DJ-Quake XLR/TRS inputs, additional speakers can be added by connecting them to the DJ-Quake’s XLR output connectors.
Page 12
Line Connection Diagrams (cont’d) CONNECTING TO A MIXER To further tailor the sound to your liking, a mixer can be easily added to the DJ-Quake 2.1 system. Simply connect your mixer’s output to the DJ-Quake’s corresponding input. The XLR output connectors are active only whne the XLR/TRS inputs are in use.
Page 13
Speakon (for additional Passive Sub) Fuse Rating 5A/250V (Ø5 x 20mm UL/VDE slow blow tube fuse) 43 5/8” - 73 5/8” (1100 - 1870mm) height adjustment Steel tubing with metal collars Specifications are subject to change without notice. DJ-Quake 2.1 Manual...
Page 14
(as shown on the original sales receipt with serial number affixed/written on it). The one (1) year warranty period is valid only if an authorized Earthquake dealer properly installs the product and the warranty registration card is properly filled out and sent to Earthquake Sound Corporation.
Page 15
You are responsible for the cost of shipping the product to Earthquake Sound Corporation. (G) Disputes Resolution: All disputes between clients and Earthquake Sound Corporation resulting from the one (1) year limited warranty policy must be resolved according to the laws & registration of the county of Alameda California.
Page 16
The Sound That Will Move You Earthquake Sound Corporation 2727 McCone Avenue. Hayward CA, 94545. USA US Toll Free: 800-576-7944 | Phone: 510-732-1000 | Fax: 510-732-1095 www.earthquakesound.com...