Downgrading From A Higher Release - Cisco nexus 5000 series Cli Configuration Manual
Hide thumbs
Also See for nexus 5000 series:
- Configuration manual (334 pages) ,
- Command reference manual (196 pages) ,
- Operation manual (45 pages)
Table of Contents
Advertisement
Downgrading from a Higher Release
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
•
Note
•
After the switch completes the installation, log in and verify that the switch is running the required
Step 11
software version.
switch# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2008, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software may be covered under the GNU Public
License or the GNU Lesser General Public License. A copy of
each such license is available at
http://www.gnu.org/licenses/gpl.html and
http://www.gnu.org/licenses/lgpl.html
Software
BIOS:
kickstart: version 4.0(0)N1(2)
system:
BIOS compile time:
kickstart image file is: bootflash:/n5000-uk9-kickstart.4.0.0.N1.2.467.bin
kickstart compile time:
system image file is:
system compile time:
Hardware
cisco Nexus5020 Chassis ("40x10GE/Supervisor")
Intel(R) Celeron(R) M CPU
Processor Board ID JAB120600AY
bootflash:
nms-eugene-02
Last reset at 63897 usecs after Mon Jul 28 09:46:39 2008
Downgrading from a Higher Release
Only users with the network-admin role can downgrade the software image.
Note
The procedure to downgrade the switch is identical to a switch upgrade, except that the image files to be
loaded are for an earlier release than the image currently running on the switch.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
1-6
Provides a prompt to allow you to continue or abort the installation.
A disruptive installation causes traffic disruption while the switch reboots.
Updates the boot variables to reference the specified images and saves the configuration to the
startup configuration file.
version 1.2.0
version 4.0(0)N1(2)
7864320 kB
kernel uptime is 11 days 3 hours 15 minute(s) 19 second(s)
Reason: Reset by installer
System version: 4.0(0)N1(1)
Service:
06/19/08
7/28/2008 2:00:00 [07/28/2008 09:41:24]
bootflash:/n5000-uk9.4.0.0.N1.2.467.bin
7/28/2008 2:00:00 [07/28/2008 10:09:17]
with 2074164 kB of memory.
Chapter 1
Configuring the Switch
OL-16597-01
Advertisement
Chapters
Table of Contents
Troubleshooting
