hit counter script
Motorola MOTORAZR2 V9 Service Manual
  1. Manuals
  2. Brands
  3. Motorola Manuals
  4. Cell Phone
  5. MOTORAZR2 V9
  6. Service manual

Motorola MOTORAZR2 V9 Service Manual

Wcdma 850/1900, wcdma 2100 gsm 850/900/1800/1900 mhz edge, gprs
Hide thumbs Also See for MOTORAZR2 V9:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Manual
Level 1 and 2 Service Manual
6809513A83-O
By
http://motorolarazr.forumcommunity.net
2
MOTORAZR
V9
WCDMA 850/1900, WCDMA 2100
GSM 850/900/1800/1900 MHz EDGE, GPRS

Advertisement

Table of Contents
loading

Related Manuals for Motorola MOTORAZR2 V9

Summary of Contents for Motorola MOTORAZR2 V9

  • Page 1 Level 1 and 2 Service Manual 6809513A83-O http://motorolarazr.forumcommunity.net MOTORAZR WCDMA 850/1900, WCDMA 2100 GSM 850/900/1800/1900 MHz EDGE, GPRS...
  • Page 2 MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license.

  • Page 3: Table Of Contents

    1 and 2 Contents Level 1 and 2 Service Manual Contents MOTORAZR 2 V9x 6809513A83-O Contents Introduction ................. 2 Product Identification .

  • Page 4: Introduction

    Available on a contract basis, Motorola Inc. offers comprehensive maintenance and installation programs that enable customers to meet requirements for reliable, continuous communications. To learn more about the wide range of Motorola service programs, contact your local Motorola products representative or the nearest Customer Service Manager. Product Identification Motorola products are identified by the model number on the housing.

  • Page 5: Computer Program Copyrights

    The Motorola products described in this manual may include Motorola computer programs stored in semiconductor memories or other media that are copyrighted with all rights reserved worldwide to Motorola. Laws in the United States and other countries preserve for Motorola, Inc. certain exclusive rights to the copyrighted...

  • Page 6: Warranty Service Policy

    When ordering replacement parts or equipment, include the Motorola part number and description used in the service manual. When the Motorola part number of a component is not known, use the product model number or other related major assembly along with a description of the related...
  • Page 7 Replacement Parts Service Division (RPSD) Order replacement parts, test equipment, and manuals from RPSD. U.S.A. Outside U.S.A. Phone: 800-422-4210 Phone: 847-538-8023 FAX: 800-622-6210 FAX: 847-576-3023 Website: http://businessonline.motorola.com EMEA Phone: 49 461 803 1404 Website: http://emeaonline.motorola.com Asia Phone: 65 648 62995 Website: http://asiaonline.motorola.com...

  • Page 8: Specifications

    Specifications MOTORAZR 2 V9 Specifications Table 1. Specifications Function Specification Frequency Range EGSM TX: 880 - 915 MHz Frequency (MHz) = 880 + (0.2 × n) where: 0 ≤ n ≤ 124 Frequency (MHz) = 880 + (0.2 × (n – 1024)) where: 975 ≤ n ≤ 1023 RX: 925 –...
  • Page 9 Level 1 and 2 Service Manual Specifications Table 1. Specifications (Continued) Transmitter Phase Accuracy 5 degrees RMS, 20 Degrees peak Frequency Error + 0.1ppm Input/Output Impedance 50 ohms (nominal) Nominal Operating Voltage 3.6 Vdc +10% (battery) +4.4 Vdc +10% (external connector) Dimensions (xyz) 53mm x 103mm x 13.4mm Size...
  • Page 10 Specifications MOTORAZR 2 V9 Modulation GFSK @ 1 MHz (base rate), pi/4 DQPSK @ 2EDR, 8DQPSK @ 3EDR Transmitter Power Class 2, -6 dBm to +4 dBm (+2 dBm nominal) Compliance Bluetooth Core Specification 2.0 + EDR GPS System Functions Specification Receiver Input, L1 channel 1.575 GHz ±...

  • Page 11: Product Overview

    Level 1 and 2 Service Manual Product Overview Product Overview MOTORAZR V9 mobile telephones feature Wideband Code Division Multiple Access (WCDMA) technology. V9 also supports High Speed Downlink Packet Access (HSPDA) a wireless radio broadband data standard adopted by many WCDMA mobile phone service providers.

  • Page 12: General Operation

    General Operation MOTORAZR 2 V9 General Operation Controls, Indicators, and Input / Output (I/O) Connections The V9 controls are located on the sides of the flip and on the keypad. See Figure 1. Open menus, select menu items. Navigate menus. Right Soft Key Left Soft Key Open the camera (press when the phone...
  • Page 13 Level 1 and 2 Service Manual General Operation The V9 phone has a large external display on the outside of the flip. The phone’s charging indicator, camera lens, and Bluetooth indicator are also located on the flip along with other external controls. The phone has a micro USB port, located on the left side of the phone.
  • Page 14 General Operation MOTORAZR 2 V9 Indicators, in the form of icons, display on the LCD. Figure 3 shows some of the icons that display on the LCD. 1. Signal 8. Battery Strength Level 2. Network 7. Audio Style 3. Data 6.

  • Page 15: Battery Function

    Level 1 and 2 Service Manual General Operation 7 Audio Indicator – Shows the audio style setting. õ loud ring Ì vibrate & ring ô soft ring ö vibrate then ring Î vibrate Í silent 8 Battery Level Indicator – Vertical bars show the battery charge level. Recharge the battery when your display shows Low Battery.
  • Page 16 General Operation MOTORAZR 2 V9 September 12, 2007 6809513A83-O...

  • Page 17: Tools And Test Equipment

    0-00-00-40880 Keypad Tab Bend Fixture 1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) at (800) 422-4210 or FAX (800) 622-6210; Internationally, AAD can be reached by calling (847) 538-8023 or faxing (847) 576-3023. 2. Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.

  • Page 18: Disassembly

    Disassembly MOTORAZR 2 V9 Disassembly The procedures in this section provide instructions for the disassembly of V9 telephones. Tools and equipment used for the phone are listed in Table 1, preceding. Many of the integrated devices used in this equipment are vulnerable to damage from electrostatic discharge (ESD).
  • Page 19 Level 1 and 2 Service Manual Disassembly Pull the tab on the label near the hinge, then remove the battery from the phone. See Figure 2. Battery v477855 Figure 2. Removing the Battery There is a danger of explosion if the Lithium Ion battery is replaced incorrectly. Replace only with the same type of battery or equivalent as recommended by the battery manufacturer.

  • Page 20: Removing And Replacing The Subscriber Identity Module (Sim)

    Disassembly MOTORAZR 2 V9 Removing and Replacing the Subscriber Identity Module (SIM) Remove the battery cover and battery as described in the procedures. Slide the SIM card out of the SIM holder, as shown in Figure 3. Memory card v477859 Figure 3.

  • Page 21: Removing And Replacing The Rear Housing

    Level 1 and 2 Service Manual Disassembly Removing and Replacing the Rear Housing This product contains static-sensitive devices. Use anti-static handling procedures to prevent electrostatic discharge (ESD) and component damage. Remove the battery cover, battery, and SIM as described in the procedures. In addition to 2 screws, the rear housing assembly is fastened with plastic latches.
  • Page 22 Disassembly MOTORAZR 2 V9 Use the T-5 driver to remove the two housing screws under the bumper pad (see Figures 5 and 6). V462594 Figure 5. Removing the Bumper Housing screw Housing screw V458596 Figure 6. Removing the Rear Housing Screws September 12, 2007 6809513A83-O...
  • Page 23 Level 1 and 2 Service Manual Disassembly Release the first housing latch by inserting the flat edge of the plastic disassembly tool at an angle through the slot on the rear housing then push away to disengage the two front snaps. Disassembly tool Rear housing v470116...
  • Page 24 Disassembly MOTORAZR 2 V9 12. Align the housing latches with the corresponding openings on the front housing. Gently press the housings together until the catches snap into place. Speaker v477898 Figure 8. Rear Housing Latches 13. Place the speaker into the rear housing and press with service fixture. 14.

  • Page 25: Removing And Replacing The Transceiver Board Assembly

    Level 1 and 2 Service Manual Disassembly Removing and Replacing the Transceiver Board Assembly This product contains static-sensitive devices. Use anti-static handling procedures to prevent electrostatic discharge (ESD) and component damage. Remove the battery cover, battery, SIM, and rear housing as described in the procedures Use the disassembly tool to unseat the display flex connector from it’s socket on the transceiver board (see Figure 9).
  • Page 26 Disassembly MOTORAZR 2 V9 Release the GPS flex connector from its socket on the transceiver board. GPS flex Disassembly tool v479170 Figure 10. Releasing the GPS Flex Connector (North America Region only) Lift the transceiver board assembly out of the front housing with the plastic tweezers.
  • Page 27 Level 1 and 2 Service Manual Disassembly To replace, install the grounding clip onto the transceiver board assembly. Use the latches (shown in the red areas to secure the clip to the transceiver board. Grounding clip v479175 Figure 12. Transceiver PC board Assembly Grounding Clip Place the transceiver PCB into the housing.

  • Page 28: Removing And Replacing The Antenna

    Disassembly MOTORAZR 2 V9 Removing and Replacing the Antenna Remove the battery cover, battery, SIM, and rear housing assembly as described in the procedures. Use the disassembly tool to release the antenna assembly, as shown in Figure 13. Antenna assembly Disassembly tool v479178 Figure 13.
  • Page 29 Level 1 and 2 Service Manual Disassembly Carefully press the antenna assembly into position until the antenna assembly latches snap into position (see Figure 14). North America antenna assembly is different from Europe antenna assembly. They are not interchangeable. Antenna assembly v498199 Figure 14.

  • Page 30: Removing And Replacing The Keypad

    Disassembly MOTORAZR 2 V9 Removing and Replacing the Keypad Remove the battery cover, battery, memory card, rear housing assembly, and transceiver board assembly as described in the procedures. Lift one arm of the battery retention chassis (BRC) from between the front housing wall and screw boss.
  • Page 31 Level 1 and 2 Service Manual Disassembly Battery retention chassis arm v498201 Figure 16. Removing the Battery Retention Chassis Arm Pull one arm of the BRC to remove the BRC from the front housing (see Figure 17). The top portion of the BRC is adhered to the front housing with adhesive.
  • Page 32 Disassembly MOTORAZR 2 V9 Ensure the adhesive is completely removed with the BRC. Scrap the used BRC. Battery retention chassis V498202 Figure 17. Removing the Battery Retention Chassis The keypad is secured by 4 bent tabs and 4 snaps (see Figure 18) Bent Tabs Bent Tabs Snaps...
  • Page 33 Level 1 and 2 Service Manual Disassembly when releasing the snap behind the keypad flex connector - DO NOT DAMAGE THE FLEX. Remove the light guide. Light guide v498216 Figure 19. Removing the Light Guide from the Front Housing 10. To replace, install light guide into the front housing. 11.
  • Page 34 Disassembly MOTORAZR 2 V9 Keypad v498215 Figure 20. Placing the Keypad into the Front Housing 12. Ensure that the keypad tabs near the corners and the keypad snaps along the sides of the keypad assembly are inserted carefully and correctly into the front housing.
  • Page 35 Level 1 and 2 Service Manual Disassembly 13. Place front housing into the keypad tab bend fixture and press (see Figure 21). v492217 Figure 21. Keypad Tab Bend Fixture 6809513A83-O September 12, 2007...
  • Page 36 Disassembly MOTORAZR 2 V9 14. Remove the BRC from the tray and remove the adhesive liner on the top side. 15. Bend the BRC legs inward slightly and install into the flip front assembly (see Figure 22). BRC leg BRC leg V479219 Figure 22.

  • Page 37: Removing And Replacing The Flip Assembly

    Level 1 and 2 Service Manual Disassembly 17. Install the transceiver board assembly, rear housing assembly, SIM, battery, and battery cover, as described in the procedures. Removing and Replacing the Flip Assembly Remove the battery cover, battery, rear housing, antenna, and transceiver board assembly as described in the procedures.
  • Page 38 Disassembly MOTORAZR 2 V9 Using the black stick, pry the CLI lens up from the nose of the phone. The black stick should be inserted into the gap between the CLI lens and the flip outer at the tertiary porting of the earpiece speaker. v461040 Figure 25.
  • Page 39 Level 1 and 2 Service Manual Disassembly Carefully slide a black stick or comparable tool under the top edge of the main lens just below the horseshoe. Be careful not to damage either the speaker porting mesh or the finish on decorated housings. Horseshoe Disassembly tool Display lens...
  • Page 40 Disassembly MOTORAZR 2 V9 10. Use a driver with T5IP bit to remove the four flip inner screws. screw screw screw screw v461036 Figure 27. Removing the Flip Inner Screws September 12, 2007 6809513A83-O...
  • Page 41 Level 1 and 2 Service Manual Disassembly 11. Gently pry the flip inner off by pulling the left side of the flip inner up and rotating to the right side to release the snap at the right knuckle. Flip inner Snap v461037 Figure 28.
  • Page 42 Disassembly MOTORAZR 2 V9 13. Disconnect the P-flex by lifting on the flex using a black stick or similar tool. It is important to disconnect the flex carefully to prevent damage to the receptacle pins (see Figure 29). I-flex K-flex P-flex Display flex v461038...
  • Page 43 Level 1 and 2 Service Manual Disassembly 18. Peel back the P-flex from the perimeter of the display bezel. The speaker will separate from the P-flex during the removal process. p-flex v462487 Figure 30. Removing the P-Flex The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when handling.
  • Page 44 Disassembly MOTORAZR 2 V9 20. Use the disassembly tool to remove the vibrator assembly (see Figure 31). Vibrator assembly v499282 Figure 31. Removing the Vibrator Assembly 21. Separate the horseshoe assembly from the flip assembly, as shown. Remove the horseshoe assembly from the flip (see Figure 32). Horsehoe assembly v462490 Figure 32.
  • Page 45 Level 1 and 2 Service Manual Disassembly 23. Slide hinge tool over end of hinge and pull away from outside of phone. This will release the front housing from the flip outer. Hinge tool v499323 Figure 33. Removing the Flip Hinge 24.
  • Page 46 Disassembly MOTORAZR 2 V9 v462492 Figure 35. Removing the Sleeve 25. Insert the disassembly tool under the k-flex to separate it from the front housing. Peel the k-flex by hand to remove it from the front housing (see Figure 36). k-flex v499335 Figure 36.
  • Page 47 Level 1 and 2 Service Manual Disassembly Assemble the Flip ➧ Only a keypad flex with the EGC1702 treatment must be used. Place the front housing into the fixture. Use the alignment pins to align the front housing to the fixture. Peel off the liner on the left side of the keypad flex.
  • Page 48 Disassembly MOTORAZR 2 V9 Guide the connector through the housing opening during assembly. Use extreme care when bending the flex. v499337 Figure 38. K-flex Connector Pre-bend the left element to a 90 degree angle. Pre bend element to 90 degree angle v499343 Figure 39.
  • Page 49 Level 1 and 2 Service Manual Disassembly Place the front housing into the service fixture. PICTURE TO BE UPDATED v473809 Figure 40. Front Housing Assembly in the Service Fixture 10. Insert the right side of the K-flex into the front housing. 11.
  • Page 50 Disassembly MOTORAZR 2 V9 12. Place the mylar on the K-Flex and press evenly to ensure proper adhesion. Pictures to be updated v499344, v499359 Figure 41. Attaching the Mylar to the K-Flex 13. Remove the front housing from the fixture. 14.
  • Page 51 Level 1 and 2 Service Manual Disassembly 15. Peel a smart key keypad flex pad from its liner. v499402 Figure 42. Installing the Smart Key Keypad Flex Pad 16. Use the tweezers to stick the keypad flex pad to the side of the phone chassis as shown.
  • Page 52 Disassembly MOTORAZR 2 V9 17. Place the housing sleeve to the front housing assembly. Ensure there is no damage to the K-flex. Press the housing sleeve into place in the front housing. v462530 Figure 43. Installing the Housing Sleeve 18. Inspect the assembly before proceeding to the next step. 19.
  • Page 53 Level 1 and 2 Service Manual Disassembly 20. Stick pad onto each side key. Carrier Button Smart Button Volume Button v512033 Figure 45. Installing the Side Key Pads 6809513A83-O September 12, 2007...
  • Page 54 Disassembly MOTORAZR 2 V9 21. Install the side keys onto the phone chassis with tweezers. v512034 Figure 46. Installing the Side Key Assemble the Camera Gasket and Water Label Peel the liner from the camera gasket and place the camera gasket into the fixture with the adhesive side facing upwards.
  • Page 55 Level 1 and 2 Service Manual Disassembly Place the water detect label and attach it to the camera shield. Water detect label v470168, v462533 Figure 47. Installing the Water Label 6809513A83-O September 12, 2007...
  • Page 56 Disassembly MOTORAZR 2 V9 Assemble the Hinge Insert the flip hinge cam into the flip outer assembly. The hinge center must remain horizontal (see Figure 48). Hinge cam v462534 v462535 Figure 48. Installing the Flip Hinge Cam Press the hinge into the flip outer. Lubrication Apply 3.5 mg of Nygel 744 lubricating grease on both sides of the hinge mechanism.
  • Page 57 Level 1 and 2 Service Manual Disassembly Assembly of Flip to front housing. Assemble flip outer assembly to the front housing. Flip Assembly Front Housing v499377 Figure 50. Installing the Flip Assembly Insert flex into flip outer housing. Align the hinge with the opening in the front housing. Flip Assembly Front Housing v4993780...
  • Page 58 Disassembly MOTORAZR 2 V9 Check flip for proper movement. v499376 Figure 52. Inspecting the Flip Assembly Vibrator Assembly Assemble the vibrator to the vibrator grommet. Vibrator and vibrator grommet must be aligned, as shown. Vibrator Grommet v462578 Figure 53. Installing the Vibrator Grommet September 12, 2007 6809513A83-O...
  • Page 59 Level 1 and 2 Service Manual Disassembly Peel away the vibrator adhesive and attach it to the vibrator assembly. Place the vibrator assembly into the flip assembly. The vibrator springs should be on the right side of the vibrator assembly. v499375 Figure 54.
  • Page 60 Disassembly MOTORAZR 2 V9 I-Flex and Display Assembly ➧ Only a keypad flex with the EGC1702 treatment must be used. The flex label should be marked with a colored dot to indicate that the flex has been treated. v470101 Figure 55. EGC1702 Treated Imager Flex Connect the imager flex assembly to the LCD.
  • Page 61 Level 1 and 2 Service Manual Disassembly Peel away the liner from the camera, camera gasket and the LCD. Place the LCD assembly into the flip assembly. Connect the K-flex connector. Clean dust and foreign matter from the LCD and display lens with an ionized air gun.
  • Page 62 Disassembly MOTORAZR 2 V9 Remove the P-Flex bottom liner and insert. Ensure the P-Flex connector passes through the housing. P flex v470104 Figure 58. Installing the Speaker Align the P-flex using 3 holes on the housing to align and adhere the P-flex to the flip assembly.
  • Page 63 Level 1 and 2 Service Manual Disassembly Place the flip assembly press fixture to attach the CLI lens to the flip assembly. v499374 Figure 60. CLI Lens Press Fixture Opened 6809513A83-O September 12, 2007...
  • Page 64 Disassembly MOTORAZR 2 V9 Close the press fixture and hold for 16 seconds. v499373 Figure 61. CLI Lens Press Fixture Closed Open the fixture and remove the flip assembly. Connect the P-Flex to the I-Flex. September 12, 2007 6809513A83-O...
  • Page 65 Level 1 and 2 Service Manual Disassembly Earpiece Cover Insert the earpiece cover into the fixture with the front side facing upward. Earpiece cover Fixture v473810 Figure 62. Earpiece Cover in the Fixture Activate the press fixture to adhere the speaker mesh to the earpiece cover. Remove the earpiece cover from the fixture and inspect earpiece cover for damage.
  • Page 66 Disassembly MOTORAZR 2 V9 Magnet Apply 1.4 mg +/-.2 mg glue to the flip inner assembly. Glue v462580 Figure 63. Installing Magnet Glue to the Flip Inner Assembly Place the magnet onto the flip inner assembly. Wipe away any excess glue. Magnet v462581 Figure 64.
  • Page 67 Level 1 and 2 Service Manual Disassembly Attach the 10 pin pad the to the back of the 10 pin connector. 10 Pin pad v462582 Figure 65. installing 10 Pin Pad Grounding Clip Install the grounding clip and secure with T5 IP driver. Grounding clip v462583...
  • Page 68 Disassembly MOTORAZR 2 V9 Flip Inner Assemble the camera upper grommet to the imager flex assembly. Imager flex Camera grommet Camera grommet v463166 Figure 67. Installing Camera Upper Grommet Assemble the flip inner assembly to the flip assembly. Flip inner assembly v463167 Figure 68.
  • Page 69 Level 1 and 2 Service Manual Disassembly Horseshoe and Main Lens Peel the liner away from the earpiece horseshoe (see Figure 69). Earpiece horseshoe liner v463168 Figure 69. Removing the Earpiece Horseshoe Liner Insert the two ends of the earpiece horseshoe into the flip assembly. Earpiece horseshoe v463169 Figure 70.
  • Page 70 Disassembly MOTORAZR 2 V9 Peel away the liner from the LCD. Use an air gun to blow away any dust or foreign matter. v463170 Figure 71. Removing the LCD Liner Peel away the liner from the main lens. Use an air gun to blow away any dust or foreign matter.
  • Page 71 Level 1 and 2 Service Manual Disassembly Place phone in the fixture. v499371 Figure 73. Pressing the Main Lens Close the fixture and hold for 13 seconds Open the fixture and remove the phone. Speaker Contacts Use the plastic tweezers to install the speaker contacts in the front housing. v499370 Figure 74.
  • Page 72 Disassembly MOTORAZR 2 V9 Replace the transceiver board, antenna, rear housing, battery, and battery cover as described in the procedures. September 12, 2007 6809513A83-O...

  • Page 73: Subscriber Identity Module (Sim) And Identification

    The Mechanical Serial Number (MSN) is an individual unit identity number and remains with the unit throughout the life of the unit. The MSN can be used to log and track a unit on Motorola's Service Center Database. The MSN is divided into 4 sections, as shown in Figure 75.
  • Page 74 Subscriber Identity Module (SIM) and Identification MOTORAZR 2 V9 International Mobile Station Equipment Identity (IMEI) The International Mobile station Equipment Identity (IMEI) number is an individual number unique to the PCB and is stored within the unit's memory. The IMEI uniquely identifies an individual mobile station and thereby provides a means for controlling access to GSM networks based on mobile station types or individual units.

  • Page 75: Troubleshooting

    Level 1 and 2 Service Manual Troubleshooting Troubleshooting Troubleshooting Chart Table 3. Level 1 and 2 Troubleshooting Chart SYMPTOM PROBABLE CAUSE VERIFICATION AND REMEDY 1. Telephone will not turn on or stay on. a) Battery either discharged or Measure battery voltage across a 50 ohm (>1 defective.
  • Page 76 Troubleshooting MOTORAZR 2 V9 Table 3. Level 1 and 2 Troubleshooting Chart (Continued) SYMPTOM PROBABLE CAUSE VERIFICATION AND REMEDY 5. Telephone transmit audio is weak. a) Transceiver board assembly Replace the transceiver board assembly (refer (usually indicated by called parties defective.

  • Page 77: Programming: Software Upgrade And Flexing

    Level 1 and 2 Service Manual Troubleshooting Table 3. Level 1 and 2 Troubleshooting Chart (Continued) SYMPTOM PROBABLE CAUSE VERIFICATION AND REMEDY 9. Vibrator feature not functioning. Transceiver board assembly Replace the transceiver board assembly (refer defective. to 1c). Verify that the fault has been cleared and reassemble the unit with the new transceiver board assembly.

  • Page 78: Exploded View Diagram

    Troubleshooting MOTORAZR 2 V9 Exploded View Diagram 24 37 v479230 Figure 76. Exploded View Diagram September 12, 2007 6809513A83-O...

  • Page 79: Exploded View Parts List

    Level 1 and 2 Service Manual Troubleshooting Exploded View Parts List The following part numbers are provided only for reference. Please contact your local Motorola parts organization for current part number information. Table 4. Parts List Motorola Part Item #...
  • Page 80 Troubleshooting MOTORAZR 2 V9 Table 4. Parts List (Continued) Motorola Part Item # Detailed Part Description Number KEYPAD,MAIN ASSY, NA,TELSTRA,DARK PEARL 3871954E02 GREY DARKENED 3871954E04 KEYPAD,MAIN ASSY,ATT MAHOGANY DARKENED 3871954E17 KEYPAD,MAIN ASSY,2100 GRAPHITE DARKENED KEYPAD,MAIN ASSY,2100 MAHOGANY, STROKE 3871954E18 DARKENED...
  • Page 81 Level 1 and 2 Service Manual Troubleshooting Table 4. Parts List (Continued) Motorola Part Item # Detailed Part Description Number ASSEMBLY,HOUSING,BACK,MAHOGANY,BASE 0171010G13 OUTER, NA W/O SPEAKER, SERVICE ASSEMBLY,HOUSING,BACK,MAHOGANY,BASE 0171718E13 OUTER, ATT,NA W/O SPEAKER, SERVICE ASSEMBLY,HOUSING,BACK,GRAPHITE,BASE 0171718E14 OUTER,NA, W/O SPEAKER, SERVICE...

  • Page 82: Accessories

    Data & Business Communications Bluetooth Class 1 USB Adapter PC850 SYN1244 Data Cable Mini USB/USB/Serial SKN6371 Digital Accessories Motorola Phone Tools Phase 4 SVN5539 MobileVoice (Wireless BT Headsets) Mono Bluetooth Headset SYN1971 Bluetooth Headset - MiniBlue H9 (Includes headset, charger...
  • Page 83 Level 1 and 2 Service Manual Troubleshooting Table 5. Accessories (Continued) Description Kit Number Bluetooth Headset - H605 SYN1303 Bluetooth Headset - HS850 (Refresh - Black) SYN1107 Bluetooth Headset - HS850 (Refresh - Blue) SYN1226 Bluetooth Headset (Pearl Dark Gray) - H300 SYN1297 Bluetooth Headset (Pink) - H300 SYN1417...
  • Page 84 Troubleshooting MOTORAZR 2 V9 Table 5. Accessories (Continued) Description Kit Number Travel Charger EMU Mid-Rate Switcher - Argentina SPN5192 Travel Charger EMU Mid-Rate Switcher - BRAZIL SPN5187 Travel Charger EMU Mid-Rate Switcher - EURO SPN5189 Travel Charger EMU Mid-Rate Switcher - MEXICO SPN5186 Travel Charger EMU Mid-Rate Switcher - PRC SPN5188...
  • Page 85 1 and 2 Index Level 1 and 2 Service Manual Index MOTORAZR2 V9 6809513A83-O names product 2 alert settings 13 antenna, removing and replacing 26 operation 10 controls, indicators, and I/O 10 battery overview, product 9 function 13 gauge 13...
  • Page 86 Index MOTORAZR2 V9 about 3 audience 3 conventions 4 scope 3 service policy 4 customer support 4 out of box failure 4 product support 4 shut down upon battery removal 13 SIM card 71 personality transfer 71 replacing 18 SIM, removing and replacing 18...

Table of Contents