hit counter script
Cisco UCS 5108 Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Server
  5. UCS 5108
  6. Installation manual

Cisco UCS 5108 Installation Manual

Chassis
Hide thumbs Also See for UCS 5108:
Table of Contents

Advertisement

Quick Links

Cisco UCS 5108 Server Chassis Installation Guide
First Published: 2009-06-10
Last Modified: 2017-06-19
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Advertisement

Table of Contents
loading

Related Manuals for Cisco UCS 5108

Summary of Contents for Cisco UCS 5108

  • Page 1 Cisco UCS 5108 Server Chassis Installation Guide First Published: 2009-06-10 Last Modified: 2017-06-19 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
  • Page 2 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.

  • Page 3: Table Of Contents

    Cisco UCS 5108 Server Chassis LEDs Buttons Connectors Midplane Blade Servers Cisco UCS B200 Blade Servers LEDs Buttons Connectors Cisco UCS B200 M3 Blade Servers LEDs Buttons Connectors Cisco UCS B200 M4 Blade Server LEDs Buttons Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 4 Cisco UCS B250 Blade Servers LEDs Buttons Connectors Cisco UCS B440 Blade Servers LEDs Buttons Connectors Cisco UCS B420 M3 High Performance Blade Server LEDs Buttons Connectors Cisco UCS B420 M4 Blade Server LEDs Buttons Connectors Cisco UCS B260 M4 Scalable Blade Server...
  • Page 5 LEDs Buttons Connectors Power Distribution Unit (PDU) LEDs Buttons Connectors Fan Modules LEDs Buttons and Connectors Power Supplies LEDs Buttons Connectors Power Supply Redundancy Non-redundant Mode N+1 Redundancy Grid Redundancy LEDs LED Locations Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 6 Contents Interpreting LEDs Installation C H A P T E R 2 Installation Notes and Warnings for the Cisco UCS 5108 Server Chassis Rack Requirements Cable Management Airflow Considerations Moving Server Chassis Installation Guidelines Required Equipment Unpacking and Inspecting the Chassis...
  • Page 7 KVM Cable Chassis Specifications Environmental Specifications Environmental Conditions and Power Requirement Specifications for Twinax SFP+ Transceivers Specifications for the Cisco UCS 5108 Blade Server Chassis Power Supply Units Supported AC Power Cords and Plugs Australia and New Zealand Continental Europe International...
  • Page 8 Site Planning and Maintenance Records A P P E N D I X B Site Preparation Checklist Contact and Site Information Chassis and Module Information FEX Port Connection Record UCS 6324 Fabric Interconnect Port Connection Record Cisco UCS 5108 Server Chassis Installation Guide viii...

  • Page 9: Preface

    In a Text-based User Interface, text the system displays appears in this font. System output Terminal sessions and information that the system displays appear in this font. CLI commands CLI command keywords appear in this font. Variables in a CLI command appear in this font. Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 10 Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. SAVE THESE INSTRUCTIONS Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 11: Related Cisco Ucs Documentation

    Related Cisco UCS Documentation Documentation Roadmaps For a complete list of all B-Series documentation, see the Cisco UCS B-Series Servers Documentation Roadmap available at the following URL: http://www.cisco.com/go/unifiedcomputing/b-series-doc. For a complete list of all C-Series documentation, see the Cisco UCS C-Series Servers Documentation Roadmap available at the following URL: http://www.cisco.com/go/unifiedcomputing/c-series-doc.
  • Page 12 Preface Obtaining Documentation and Submitting a Service Request Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 13: Overview

    The Cisco UCS 5108 server chassis and its components are part of the Cisco Unified Computing System (UCS), which uses the Cisco UCS 5108 server system with the two I/O modules and the Cisco UCS Fabric Interconnects to provide advanced options and capabilities in server and data management. All servers are managed via the GUI or CLI with Cisco UCS Manager.
  • Page 14 CPUs and SAS RAID controllers For smaller solutions, the Cisco UCS 6324 Fabric Interconnect can be used in the I/O slots at the back of the Cisco USC 5108 Chassis. The 6324 Fabric Interconnect is only supported in the UCSB-5108-AC2 and UCSB-5108-DC2 versions of the 5100 Series Chassis.

  • Page 15: Features And Benefits

    This simplicity eliminates the need for dedicated chassis management and blade switches, reduces cabling, and enables the Cisco Unified Computing System to scale to 40 chassis without adding complexity. The Cisco UCS 5108 server chassis is a critical component in delivering the Cisco Unified Computing System benefits of data center simplicity and IT responsiveness.

  • Page 16: Components

    Is six rack units (6 RU) high and can mount in an industry-standard 19-inch rack with square holes (such as the Cisco R Series Racks) or in round hole racks when an adapter is used. The chassis can house up to eight...

  • Page 17: Leds

    Overview Blade Servers half-width Cisco UCS B-Series Blade Servers and can accommodate both half- and full-width blade form factors. Up to four hot-swappable AC, DC or HVDC power supplies are accessible from the front of the chassis. These power supplies can be configured to support nonredundant, N+1 redundant, and grid-redundant configurations.

  • Page 18: Cisco Ucs B200 Blade Servers

    • Out-of-band access by remote KVM, Secure Shell (SSH), and virtual media (vMedia) as well as Intelligent Platform Management Interface (IPMI) The Cisco UCS B-Series offers multiple blade server models. The supported processor family is indicated by M1, M2, M3, or M4 designations on the model.

  • Page 19: Leds

    Cisco UCS B200 M3 Blade Servers For full service and installation instructions, see the Cisco UCS B200 M3 Blade Server Installation and Service Note. You can install up to eight UCS B200 M3 Blade Servers to a chassis. Figure 2: Cisco UCS B200 M3...

  • Page 20: Leds

    Cisco UCS B200 M4 Blade Server For full service and installation instructions, see the Cisco UCS B200 M4 Blade Server Installation and Service Note. You can install up to eight UCS B200 M4 Blade Servers in a chassis. Figure 3: Cisco UCS B200 M4 Front Panel...

  • Page 21: Connectors

    A console port gives a direct connection to a blade server to allow operating system installation and other management tasks to be done directly rather than remotely. The port uses the KVM dongle device included in the chassis accessory kit. See KVM Cable, on page 85 for more information. Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 22: Cisco Ucs B22 M3 Blade Servers

    Cisco UCS B22 M3 Blade Servers For full service and installation instructions, see the Cisco UCS B22 Blade Server Installation and Service Note. You can install up to eight UCS B22 M3 Blade Servers to a chassis. Figure 4: Cisco UCS B22 M3...

  • Page 23: Connectors

    Cisco UCS B230 Blade Servers For full service and installation instructions, see the Cisco UCS B230 Blade Server Installation and Service Note. You can install up to eight UCS B230 Blade Servers to a chassis. Figure 5: Cisco UCS B230 (N20-B6730) Front Panel...

  • Page 24: Leds

    KVM Cable, on page 85 for more information. Cisco UCS B250 Blade Servers For full service and installation instructions, see the Cisco UCS B250 Blade Server Installation and Service Note. Figure 6: Cisco UCS B250 Hard drive bay 1 Power button and LED...

  • Page 25: Leds

    KVM Cable, on page 85 for more information. Cisco UCS B440 Blade Servers For full service and installation instructions, see the Cisco UCS B440 High Performance Blade Server Installation and Service Note. Figure 7: Cisco UCS B440 Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 26: Leds

    A console port gives a direct connection to a blade server to allow operating system installation and other management tasks to be done directly rather than remotely. The port uses the KVM dongle device included in the chassis accessory kit. See KVM Cable, on page 85 for more information. Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 27: Cisco Ucs B420 M3 High Performance Blade Server

    Overview Cisco UCS B420 M3 High Performance Blade Server Cisco UCS B420 M3 High Performance Blade Server For full service and installation instructions, see the Cisco UCS B420 M3 High Performance Blade Server Installation and Service Note. You can install up to four UCS B420 M3 High Performance Blade Servers to a chassis.

  • Page 28: Connectors

    Cisco UCS B420 M4 Blade Server Installation and Service Note. You can install up to four UCS B420 M4 High Performance Blade Servers in a chassis. Figure 9: Cisco UCS B420 M4 Blade Server Front Panel Hard drive bay 1...

  • Page 29: Leds

    Cisco UCS B260 M4 and B460 M4 Scalable Blade Server Installation and Service Note. You can install up to four UCS B260 M4 Blade Servers in the Cisco UCS 5108 server chassis. Figure 10: Cisco UCS B260 M4 Scalable Blade Server...

  • Page 30: Leds

    A console port gives a direct connection to a blade server to allow operating system installation and other management tasks to be done directly rather than remotely. The port uses the KVM dongle device included in the chassis accessory kit. See KVM Cable, on page 85 for more information. Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 31: Cisco Ucs B460 M4 Blade Server

    Cisco UCS B260 M4 and B460 M4 Scalable Blade Server Installation and Service Note. Up to two Cisco UCS B460 M4 Blade Servers can be installed in the Cisco UCS 5108 chassis. Figure 11: Cisco UCS B460 M4 Blade Server...

  • Page 32: Connectors

    Cisco UCS Virtual Interface Card 1240 The Cisco UCS Virtual Interface Card 1240 is a four-port 10 Gigabit Ethernet, Fibre Channel over Ethernet (FCoE)-capable modular LAN on motherboard (mLOM) designed exclusively for the M3 generation of Cisco UCS B-Series blade servers.

  • Page 33: Cisco Ucs 82598Kr-Ci 10 Gigabit Ethernet Adapter

    TCO through NIC, HBA, cabling, and switch reduction. The Cisco UCS M81KR presents up to 128 virtual interfaces to the operating system on a given blade. The 128 virtual interfaces can be dynamically configured by Cisco UCS Manager as either Fibre Channel or Ethernet devices.

  • Page 34: Cisco Ucs M71Kr-Q Qlogic Converged Network Adapter

    Designed specifically for the Cisco UCS blades, the adapter provides a dual-port connection to the midplane of the blade server chassis. The Cisco UCS M71KR-Q uses an Intel 82598 10 Gigabit Ethernet controller for network traffic and a QLogic 4-Gbps Fibre Channel controller for Fibre Channel traffic, all on the same adapter card.

  • Page 35: Cisco Ucs 6324 Fabric Interconnect

    Ethernet ports and Fibre Channel over Ethernet (FCoE) ports. The Cisco UCS 6324 Fabric Interconnect fits into the back of the Cisco UCS Mini chassis. Each Cisco UCS Mini chassis can support up to two UCS 6324 Fabric Interconnects, which enables increased capacity as well as redundancy.

  • Page 36: Cisco Ucs 2304 Iom

    The Cisco UCS 2304 IOM (Fabric Extender) is an I/O module with 8 40-Gigabit backplane ports and 4 40-Gigabit uplink ports. It can be hot-plugged into the rear of a Cisco UCS 5100 Series blade server chassis. A maximum of two UCS 2304 IOMs can be installed in a chassis.

  • Page 37: Cisco Ucs 5108 Server Chassis Installation Guide

    Figure 13: Cisco UCS 2304 IOM System status LED QSFP port activity LEDs HDMI console connector and Captive screws for the insertion latches Ethernet management port 40-Gigabit uplink ports Insertions latches 40-Gigabit backplane ports Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 38: Leds

    Cisco UCS 2200 Series FEXes Figure 14: Cisco UCS 2208 FEX (UCS-IOM-2208XP) Fabric extender status indicator LED Captive screws for the insertion latches Link status indicator LEDs HDMI console connector for use by Cisco service technicians Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 39: Cisco Ucs 5108 Server Chassis Installation Guide

    Ethernet connections between blade servers and the fabric interconnect, simplifying diagnostics, cabling, and management. The Cisco UCS 2200 Series extends the I/O fabric between the fabric interconnects and the Cisco UCS 5100 Series Blade Server Chassis, enabling a lossless and deterministic Fibre Channel over Ethernet (FCoE) fabric to connect all blades and chassis together.

  • Page 40: Leds

    Therefore, separate chassis management modules are not required. Cisco UCS 2200 Series FEXes fit into the back of the Cisco UCS 5100 Series chassis. Each Cisco UCS 5100 Series chassis can support up to two FEXes, enabling increased capacity as well as redundancy.

  • Page 41: Cisco Ucs 2104Xp Fexes

    HDMI console connector for use by Cisco service technicians Connection ports (to the fabric interconnect) Cisco UCS 2100 Series FEXes bring the unified fabric into the blade server enclosure, providing 10 Gigabit Ethernet connections between blade servers and the fabric interconnect, simplifying diagnostics, cabling, and management.

  • Page 42: Leds

    Therefore, separate chassis management modules are not required. Cisco UCS 2100 Series FEXes fit into the back of the Cisco UCS 5100 Series chassis. Each Cisco UCS 5100 Series chassis can support up to two FEXes, enabling increased capacity as well as redundancy.

  • Page 43: Fan Modules

    Different power supplies are available to work with the AC (UCSB-PSU-2500ACPL or N20-PAC5-2500W) or DC (UCSB-PSU-2500DC48) versions of the chassis. When configured with the Cisco UCS 6324 Fabric Interconnect, only the following power supplies are supported: UCSB-PSU-2500ACDV dual-voltage supply and UCSB-PSU-2500DC48 -48V DC power supply.

  • Page 44: Power Supply Redundancy

    When using Cisco UCS Release 1.3(1) or earlier releases, small configurations that use less than 25000W may be powered up on a single power supply. When using Cisco UCS Release 1.4(1) and later releases, the chassis requires a minimum of 2 power supplies.

  • Page 45: Grid Redundancy

    Adding an additional power supply to either of these configurations will provide an extra level of protection. Cisco UCS Manager turns on the extra power supply in the event of a failure and restores N+1 protection. An n+1 redundant system has either two or three power supplies, which may be in any slot.

  • Page 46: Leds

    Overview LEDs LEDs LEDs on both the chassis and the modules installed within the chassis identify operational states, both separately and in combination with other LEDs. Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 47: Led Locations

    Figure 18: LEDs on a Cisco UCS 5108 Server Chassis — Front View Figure 19: LEDs on the Cisco UCS 5108 Server Chassis — Rear View Figure 20: Cisco UCS 5108 Server Chassis — Rear View with the Cisco UCS 6324 Fabric Interconnect Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 48: Interpreting Leds

    Chassis connections No power. Amber No I/O module is installed or the I/O module is booting. Green Normal operation. Chassis health Solid amber Indicates a component failure or a major over-temperature alarm. Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 49 Booting or minor temperature alarm. Blinking amber POST error or other error condition. Port 1-4 Link down. Green Link up and operationally enabled. Amber Link up and administratively disabled. Blinking amber POST error or other error condition. Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 50 Port 1-4 Link enabled but no connected. Green Link connected. Amber Operator disabled. Blinking amber Disabled due to error. Table 5: Cisco UCS 6324 Fabric Interconnect LEDs Color Description Body No power. Green Normal operation. Amber Booting or minor temperature alarm.
  • Page 51 At least one network link is up. Health Power off. Green Normal operation. Amber Minor error. Blinking Critical error. Amber Activity Inactive. Green Outstanding I/O to disk drive. (Disk Drive) Health No fault. Amber Some fault. (Disk Drive) Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 52 Overview Interpreting LEDs Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 53: Installation

    C H A P T E R Installation This chapter contains the following sections: • Installation Notes and Warnings for the Cisco UCS 5108 Server Chassis, page 41 • Installing the Chassis, page 46 • Repacking the Chassis, page 62 •...

  • Page 54: Rack Requirements

    Do not use racks that have obstructions. These obstructions could impair access to field-replaceable units (FRUs). The Cisco R Series Racks are an ideal choice. If other racks will be used, the rack must be of the following type: • Standard 19-inch (48.3 cm) four-post EIA rack, a minimum of 39.4 inches (100 cm) deep, with mounting rails that conform to English universal hole spacing per section 1 of ANSI/EIA-310-D-1992.

  • Page 55: Airflow Considerations

    When lifting the chassis, be aware of its weight, and follow these guidelines: Caution Do not try to lift the chassis using the handles on the side. These handles are intended only for moving and adjusting the chassis position. Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 56: Installation Guidelines

    Avoid UPS types that use ferroresonant technology. These UPS types can become unstable with systems such as the Cisco UCS, which can have substantial current draw fluctuations due to fluctuating data traffic patterns.

  • Page 57: Required Equipment

    • Cables with connectors (including the N20-BKVM=, which is the KVM/local I/O console dongle) • Any optional items ordered Step 3 Verify that all unused blade slots and power supply bays have blank covers. Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 58: Attaching The Round Hole Adapter Kit To The Rails (Optional)

    Caution Never attempt to lift the chassis by using an installed module’s handle as a grip point. only use the handles on the sides of the chassis. Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 59 Left tool-less rack mount rail Right tool-less rack mount rail 10-32 X 0.75 Phillips round washer head screws 10-32 X 0.125 cage nuts Table 8: Contents of the Cisco UCS 5108 Server Round Hole Adapter Kit (N20-CRMK2-RHA=) Quantity Part Description Round hole adapters (threaded)

  • Page 60: Installing The Rails

    Procedure Step 1 Remove the mounting template (Cisco 78-19093-01) from the accessory box. The template is designed to show you the proper holes within which the rails and cage nuts should be placed. Once the rack holes line up with the template, you should mark the holes so that their position is known after removing the template.
  • Page 61 Insert the cage nuts on to the rack in the needed square holes as shown below. When the rails are installed on a rack unit boundary, the first two cage nuts are installed into the seventh holes above the rails’ horizontal Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 62 .625 Right rail .625 .250 Step 8 Remove all power supplies, fan assemblies, server blades, and fabric extenders to lighten the chassis. Even with devices removed, the chassis weighs 90 lbs (40.83 kg). Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 63: Installing The Round Hole Adapter Kit

    Procedure Step 1 Remove the mounting template (Cisco 78-19093-01) from the accessory box. The template is designed to show you the proper holes within which the rails and cage nuts should be placed. Once the rack holes line up with the template, you should mark the holes so that their position is known after removing the template.

  • Page 64: Inserting The Chassis Into The Rack

    Figure 30: Mounting Rail Weight Distribution (Square Hole Mount Shown) Weight bearing surface. Chassis should be riding on this surface. NON-WEIGHT BEARING SURFACE- CHASSIS SHOULD NOT BE RIDING ON THIS SURFACE Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 65 For a DC installation, see Connecting a DC Power Supply, on page 55.To determine the number of power supplies needed for a given configuration, use the Cisco UCS Power Calculator tool. Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 66: Installing Rear Brackets

    Connectivity, on page Installing Rear Brackets Before shipping a preracked UCS 5108 chassis or UCS Mini chassis, you must install a pair of integration brackets (RACK-HW-016) to secure the rear of the chassis to the rack rail. The following figure shows the brackets.

  • Page 67: Connecting A Dc Power Supply

    Procedure Step 1 Install the UCS 5108 or UCS Mini chassis. See callout 1 in the following figure. Step 2 Attach the supplied cage nuts to the rack rails for the left and right brackets. See callout 2. The tightening torque is 45 lb-in (5.0 N-m).

  • Page 68: Dc Power Installation Procedure

    Hazardous voltage or energy may be present on DC power terminals. Always replace cover when terminals Warning are not in service. Be sure uninsulated conductors are not accessible when cover is in place. Statement 1075 Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 69 90-degree ground lug wire. Both connections have double lugs with .25 inch holes measuring .625 inches from center to center. Figure 35: Connecting DC Power to the Chassis (shows DC PDU only, Chassis is Omitted) Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 70: Cabling Considerations For Fabric Port Channels

    Cabling Considerations for Fabric Port Channels When you configure the links between the Cisco UCS 2200 Series FEX and a Cisco UCS 6200 series fabric interconnect in fabric port channel mode, the available virtual interface namespace (VIF) on the adapter varies depending on where the FEX uplinks are connected to the fabric interconnect ports.

  • Page 71: Proper Fex And Fabric Interconnect Port Connectivity

    If the cabling is asymmetric, the maximum number of VIFs available is the smaller of the two cabling configurations. For more information on the maximum number of VIFs for your Cisco UCS environment, see the Configuration Limits document for your hardware and software configuration.
  • Page 72 The following figure shows an invalid connection from a FEX to two separate fabric interconnects. Figure 37: Invalid Connection for the Server Chassis and two Cisco UCS 6120XP Fabric Interconnects ◦ Both fabric interconnects should be wired identically: if port 1 on FEX 1 for a chassis goes to FI-A port 5, then port 1 on FEX 2 goes to FI-B port 5.

  • Page 73: Removing The Chassis From A Rack

    SAN connections. Figure 38: Proper Connection for the Server Chassis and two Cisco UCS 6120XP Fabric Interconnects Removing the Chassis from a Rack...

  • Page 74: Repacking The Chassis

    Installation Repacking the Chassis For details, see the Configuration Guide for the version of Cisco UCS Manager that you are using. The configuration guides are available at the following URL: http://www.cisco.com/en/US/products/ps10281/ products_installation_and_configuration_guides_list.html Step 2 Disconnect the power cords and networking cables from the chassis.

  • Page 75: Optical Sfp+ Transceivers

    4 While the SFP-10G-LR is supported by both the fabric interconnect and I/O module, the maximum distance will introduce latency issues that will affect overall performance. Documentation for SFP+ 10-Gb Ethernet optical transceivers is at http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/installation/note/78_15160.html Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 76: Sfp And Sfp+ Transceivers For The Ucs 6324 Fabric Interconnect

    10-Gb Ethernet—copper SFP+ (1 m, 3.28 ft.) SFP-H10GB-CU3M 10-Gb Ethernet—copper SFP+ (3 m, 9.84 ft.) SFP-H10GB-CU5M 10-Gb Ethernet—copper SFP+ (5 m, 16.4 ft.) SFP-H10GB-ACU7M 10-Gb Ethernet—copper SFP+ (7 m, 22.9 ft.) SFP-H10GB-ACU10M 10-Gb Ethernet—copper SFP+ (10 m, 32.8 ft.) Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 77: Twinax Copper Cables For The Ucs 6324 Fabric Interconnect

    1 meter passive QSFP-4x10G-AC7M 40GBASE-CR4 QSFP+ to four 10GBASE-CU SFP+ direct attach breakout cable assembly, 7 meter active QSFP-4x10G-AC10M 40GBASE-CR4 QSFP+ to four 10GBASE-CU SFP+ direct attach breakout cable assembly, 10 meter active Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 78: Replacing A Copper Twinax Sfp+ Transceiver With An Optical Sfp+ Transceiver

    Insert the optical SFP+ transceiver into the FEX port. Make sure that it clicks firmly into place. Step 3 Plug the fiber-optic cable into the optical SFP+ transceiver. Figure 41: Replacing a Copper SFP+ Transceiver with an Optical SFP+ Transceiver Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 79 Installation Replacing a Copper Twinax SFP+ Transceiver with an Optical SFP+ Transceiver Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 80 Installation Replacing a Copper Twinax SFP+ Transceiver with an Optical SFP+ Transceiver Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 81: Installing And Removing Components

    Migrating to UCS 6300 Series Fabric Interconnects and the UCS 2304 IOM, page 79 • Installing and Removing a Fan Module, page 82 Components The following figure shows an empty Cisco UCS 5108 server chassis and identifies the front, back, and module slots. Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 82: Components

    Failing to do so can result in heating and EMI issues. Blank panels can be ordered from Cisco Systems. Figure 42: View of Cisco UCS 5108 Server Chassis Front of chassis Power supply slot (4 slots)

  • Page 83: Installing And Removing A Blade Server

    (N20-BBLKD) to assure proper cooling and ventilation. The chassis is omitted from illustrations here to simplify the drawing. To prevent ESD damage, wear grounding wrist straps during these procedures and handle modules by the Caution carrier edges only. Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 84: Installing A Blade Server Hard Drive

    Push the hard drive lever into the closed position. The following figure shows the positioning of a hard drive within a blade server. Figure 43: Positioning a Hard Drive in a Blade Server (Cisco UCS B200 M1 shown) Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 85: Removing A Blade Server Hard Drive

    Step 1 Push the button to release the ejector, and then pull the hard drive from its slot. Figure 44: Pressing the Button on the Front of the Hard Drive to Deploy the Lever (Cisco UCS B200 M1 shown) Release button...

  • Page 86: Installing A Power Supply

    Depending on the outlet receptacle on your rack’s power distribution unit, you may need the optional Note jumper power cord to connect the Cisco UCS 5108 server chassis to an outlet receptacle. Step 6 Connect the other end of the power cable to the AC–power source.

  • Page 87: Removing A Power Supply

    Removing a Power Supply Caution If you are using the Cisco UCS 5108 server chassis with one power supply (this is only supported in earlier versions of the system software), removing the power supply will cause the servers and chassis to shut down.

  • Page 88: Installing A Pdu

    Step 1 Hold the PDU module from below, with the captive screws at the top of the module. Figure 47: Positioning a PDU (N01-UAC1) in the Cisco UCS Server Chassis, AC Version Step 2 Push the PDU module into the chassis until it seats properly. If power supplies are installed, you may need to partially remove them.

  • Page 89: Installing And Removing A Fex Or Fabric Interconnect

    Note IOM except during migration. The same slot that is used for a FEX is used for the Cisco UCS 6324 Fabric Interconnect. Up to two of these modules can be installed in the chassis. UCS 2104 to UCS 2200 Series FEX Upgrade Considerations...

  • Page 90: Removing A Fex Or Ucs 6324 Fabric Interconnect

    If you plan to remove a FEX or UCS 6324 fabric interconnect for an extended period of time, you Note must replace it with the N20-CBLKI blank to avoid EMI issues. Blanks can be order from Cisco. Installing a FEX or Fabric Interconnect...

  • Page 91: Migrating To Ucs 6300 Series Fabric Interconnects And The Ucs 2304 Iom

    Before You Begin Before starting the hardware migration, make the following changes to Cisco UCS Manager software: • Download Cisco UCS Manager, Release 3.1 to the UCS 6200 Series Fabric Interconnects and upgrade to this version. • Download Cisco UCS Manager, Release 3.1 to the UCS 6300 Series Fabric Interconnects.
  • Page 92 Step 17 Once HA is ready, change the primary role to the Cisco UCS 6332 Fabric Interconnect cluster lead. Step 18 Repeat steps 2 to 16 to replace the Cisco UCS 6248 Fabric Interconnect with a Cisco UCS 6332 Fabric Interconnect.

  • Page 93: Migrating Io Modules

    Remove the configuration on the server ports that are connected to the Cisco UCS 2204 or UCS 2208 IOM in the subordinate fabric interconnect. Step 2 Remove the cables and replace the Cisco UCS 2204 or UCS 2208 IOM with the Cisco UCS 2304 IOM in the chassis. Step 3 Connect the 40-Gbps cables to the UCS 2304 IOM and the UCS 6332 Fabric Interconnect.

  • Page 94: Installing And Removing A Fan Module

    Step 4 Verify that the LED behavior is as expected. See LED Locations, on page 35 Interpreting LEDs, on page Figure 49: Positioning a Fan Module (N20-FAN5) in the Cisco UCS Server Chassis Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 95: Removing A Fan Module

    The chassis is designed to have all fan modules in place and operating at all times. Do not leave a Note fan module bay empty for longer than is necessary to replace it with a new fan module. Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 96 Installing and Removing Components Removing a Fan Module Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 97: Appendix A Technical Specifications

    A P P E N D I X Technical Specifications This appendix lists the technical specifications for the Cisco UCS 5108 server chassis and includes the following sections: • KVM Cable, page 85 • Chassis Specifications, page 86 • Environmental Specifications, page 87 •...

  • Page 98: Chassis Specifications

    25 lbs (11.34 kg) B440 Blade Server 34.5 lbs (15.65 kg) Hard drive 0.8 lbs (0.36 kg) Fully Populated UCS 5108 Server Chassis Approximately 255 lbs (115.66 kg), depending on models and options selected Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 99: Environmental Specifications

    Environmental Conditions and Power Requirement Specifications for Twinax SFP+ Transceivers Table 18: Environmental Conditions and Power Requirement for the SFP+ Transceiver Parameter Symbol Min. Max. Unit Storage temperature –40 °C Case temperature °C Module supply voltage VCCT,R Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 100: Specifications For The Cisco Ucs 5108 Blade Server Chassis Power Supply Units

    Technical Specifications Specifications for the Cisco UCS 5108 Blade Server Chassis Power Supply Units Specifications for the Cisco UCS 5108 Blade Server Chassis Power Supply Units Table 19: AC-input Gold Power Supply (N20-PAC5-2500W) Specifications Description Specification AC-input voltage Voltage Range 100-120 VAC, 200-240 VAC nominal...
  • Page 101 Technical Specifications Specifications for the Cisco UCS 5108 Blade Server Chassis Power Supply Units Description Specification Maximum Input VA 2790 VA @ 200 VAC Maximum output power per power supply 2500 W (up to four power supplies) Maximum inrush current...
  • Page 102 Technical Specifications Specifications for the Cisco UCS 5108 Blade Server Chassis Power Supply Units Item Specification DC input terminal block Accepts Panduit LCD4-14AF-L or equivalent barrel-type lug terminals with 90-degree angle, two- hole tongue, which accommodates 1/0 AWG size copper wire. The connector tongue width is 0.82 in,...

  • Page 103: Supported Ac Power Cords And Plugs

    The jumper power cords, for use in racks, are available as an optional alternative to the standard power cords. The optional jumper power cords have an IEC C19 connector (such as a Cisco RP Series PDU) on the end that plugs into the chassis’ PDU and an IEC C20 connector on the end that plugs into an IEC C19 outlet receptacle.

  • Page 104: Australia And New Zealand

    Australia and New Zealand Power Cord Part Number—CAB-AC-16A-AUS Cord Set Rating—16A, 250 VAC Figure 51: CAB-AC-16A-AUS Power Cord for the Cisco UCS 5108 Blade Server Chassis Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) Plug: AU20S3...

  • Page 105: Israel

    Technical Specifications Israel Cord Set Rating—16A, 250 VAC Figure 53: CAB-AC-2500W-INT Power Cord for the UCS 5108 Blade Server Chassis Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) Plug: IEC 309 Connector: IEC 60320 C19 Israel Power Cord Part Number—CAB-AC-2500W-ISRL...

  • Page 106: Peoples Republic Of China

    Technical Specifications Peoples Republic of China Cord Set Rating—16A, 250 VAC Figure 55: CAB-AC-2500W-US1 Power Cord for the UCS 5108 Blade Server Chassis Cordset rating: 20 A, 250 V Length: 14 ft 0 in. (4.26 m) Plug: NEMA 6-20 Connector: IEC 60320 C19 Locking 200 to 240 VAC Operation Power Cord Part Number—CAB-AC-C6K-TWLK...

  • Page 107: Switzerland

    Technical Specifications Switzerland Cord Set Rating—16A, 250 VAC Figure 57: CAB-AC-16A-CH Power Cord for the Cisco UCS 5108 Blade Server Chassis Cordset rating: 16A, 250V Length: 14 ft 0 in. (4.26 m) Plug: GB16C Connector: IEC 60320-1 C19 Switzerland Power Cord Part Number—CAB-ACS-16 Cord Set Rating—16A, 250 VAC...
  • Page 108 Technical Specifications Power Distribution Unit (PDU) Cord Set Rating—Not applicable Figure 59: CAB-C19-CBN Power Cord for the UCS 5108 Blade Server Chassis Connector : Cordset r ating: 16 A, 250 V Connector : IEC 60320 C20 IEC 60320 C19 Length: 9 ft 0 in. (2.7 m)

  • Page 109: Appendix B Site Planning And Maintenance Records

    A P P E N D I X Site Planning and Maintenance Records Note For information about how to query the chassis for configuration information, see the Cisco UCS Configuration Guide. This appendix includes the following records to use when installing the Cisco UCS server chassis: •...
  • Page 110 • Distance limitations for signaling • Site wiring • RFI levels 6 Verify that the power supply installed in the chassis has a dedicated AC source circuit. 7 UPS: uninterruptable power supply. Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 111: Contact And Site Information

    Use the following worksheets to record information about the server chassis and the modules it contains. Contract Number_______________________________________________ Chassis Serial Number___________________________________________ Product Number________________________________________________ Table 26: Device Information Device Serial Number Notes Blade Server–1 Cisco UCS 5108 Server Chassis Installation Guide...
  • Page 112 Blade Server–2 Blade Server–3 Blade Server–4 Blade Server–5 Blade Server–6 Blade Server–7 Blade Server–8 I/O Module-1 I/O Module-2 The serial numbers of all server chassis modules can be obtained using Cisco UCS Manager. Note Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 113: Fex Port Connection Record

    Site Planning and Maintenance Records FEX Port Connection Record FEX Port Connection Record Table 27: Chassis FEX to Fabric Interconnect Port Connection Record Connected to Number Port Fabric Slot Port Connection notes Interconnect A or B Cisco UCS 5108 Server Chassis Installation Guide...

  • Page 114: Ucs 6324 Fabric Interconnect Port Connection Record

    Site Planning and Maintenance Records UCS 6324 Fabric Interconnect Port Connection Record UCS 6324 Fabric Interconnect Port Connection Record Table 28: Port Connection Record Fabric Interconnect Connected to Number Port Slot Port Connection notes Cisco UCS 5108 Server Chassis Installation Guide...

Table of Contents

Save PDF