Digital output module dq 8x230vac/2a st triac (32 pages)
Summary of Contents for Siemens Simatic S7-1500
Page 2
___________________ Preface ___________________ Documentation guide ___________________ SIMATIC Product overview ___________________ Wiring S7-1500/ET 200MP Digital output module ___________________ DQ 8x230VAC/2A ST Triac Parameters/address space (6ES7522-5FF00-0AB0) ___________________ Diagnostic alarms Manual ___________________ Technical specifications ___________________ Dimensional drawing ___________________ Parameter data records 09/2016 A5E03485733-AD...
Page 3
Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
Purpose of the documentation This manual supplements the system manual S7-1500/ET 200MP (https://support.industry.siemens.com/cs/ww/en/view/59191792). Functions that relate in general to the systems are described in this system manual. The information provided in this manual and in the system/function manuals supports you in commissioning the systems.
Page 5
In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens’ products and solutions only form one element of such a concept. Customer is responsible to prevent unauthorized access to its plants, systems, machines and networks.
Documentation guide The documentation for the SIMATIC S7-1500 automation system, the CPU 1516pro-2 PN based on SIMATIC S7-1500 and the SIMATIC ET 200MP distributed I/O system is arranged into three areas. This arrangement enables you to access the specific content you require.
Page 8
You can download the product information free of charge from the Internet (https://support.industry.siemens.com/cs/us/en/view/68052815). Manual Collection S7-1500/ET 200MP The Manual Collection contains the complete documentation on the SIMATIC S7-1500 automation system and the ET 200MP distributed I/O system gathered together in one file. You can find the Manual Collection on the Internet (https://support.industry.siemens.com/cs/ww/en/view/86140384).
Page 9
● Manuals, characteristics, operating manuals, certificates ● Product master data You can find "mySupport" - CAx data on the Internet (http://support.industry.siemens.com/my/ww/en/CAxOnline). Application examples The application examples support you with various tools and examples for solving your automation tasks. Solutions are shown in interplay with multiple components in the system - separated from the focus on individual products.
Page 10
You can find the SIMATIC Automation Tool on the Internet (https://support.industry.siemens.com/cs/ww/en/view/98161300). PRONETA With SIEMENS PRONETA (PROFINET network analysis), you analyze the PROFINET network during commissioning. PRONETA features two core functions: ● The topology overview independently scans PROFINET and all connected components.
Product overview Properties Article number 6ES7522-5FF00-0AB0 View of the module Figure 2-1 View of the DQ 8x230VAC/2A ST module Properties The module has the following technical properties: ● 8 digital outputs (Triac) ● Rated output voltage 120 V/230 V AC ●...
Page 12
The following component can be ordered separately: Front connectors, including potential jumpers and cable ties You can find additional information on accessories in the system manual S7-1500/ET 200MP (https://support.industry.siemens.com/cs/ww/en/view/59191792). Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0) Manual, 09/2016, A5E03485733-AD...
This section contains the block diagram of the module and outlines various wiring options. You can find information on wiring the front connector, creating a cable shield, etc. in the Wiring section of the system manual S7-1500/ET 200MP (https://support.industry.siemens.com/cs/ww/en/view/59191792). Note Do not insert the potential jumpers included with the front connector!
Parameters/address space Parameters DQ 8x230VAC/2A ST parameters When you assign the module parameters in STEP 7, you use various parameters to specify the module properties. The following table lists the configurable parameters. The effective range of the configurable parameters depends on the type of configuration. The following configurations are possible: ●...
Parameters/address space 4.2 Address space Address space The module can be configured differently in STEP 7; see following table. Depending on the configuration, additional/different addresses are assigned in the process image output/input. Configuration options of DQ 8x230VAC/2A ST You can configure the module with STEP 7 (TIA Portal) or with a GSD file. When you configure the module by means of the GSD file, the configurations are available under different short designations/module names.
Page 16
Parameters/address space 4.2 Address space Address space for configuration as 1 x 8-channel DQ 8x230VAC/2A ST MSO For the configuration as a 1 x 8-channel module (module-internal Shared Output, MSO), channels 0 to 7 of the module are copied to multiple submodules. Channels 0 to 7 are then available with identical values in various submodules.
Page 17
Reference You can find information on the Shared Input/Output (MSI/MSO) function in the section Module-Internal Shared Input/Output (MSI/MSO) of the PROFINET with STEP 7 V13 (https://support.industry.siemens.com/cs/ww/en/view/49948856) function manual. Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0) Manual, 09/2016, A5E03485733-AD...
Diagnostic alarms Status and error displays LED displays The following figure shows the LED displays (status and error displays) of DQ 8x230VAC/2A ST. Figure 5-1 LED displays of the module DQ 8x230VAC/2A ST Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0) Manual, 09/2016, A5E03485733-AD...
Page 19
Diagnostic alarms 5.1 Status and error displays Meaning of the LED displays The following table explains the meaning of the status and error displays. RUN and ERROR LED Table 5- 1 Status and error displays RUN and ERROR Meaning Remedy ERROR Voltage missing or too low at backplane bus Switch on the CPU and/or the system pow-...
Technical specifications Technical specifications of the DQ 8x230VAC/2A ST 6ES7522-5FF00-0AB0 General information Product type designation DQ 8x230VAC/2A ST (Triac) Hardware functional status FS01 Firmware version V2.0.0 FW update possible • Product function I&M data Yes; I&M0 to I&M3 Engineering with STEP 7 TIA Portal can be configured/integrated V12 / V12 as of version...
Page 21
Technical specifications 6ES7522-5FF00-0AB0 Output current For signal "1" rated value For signal "1" permitted range, min. 10 mA For signal "1" permitted range, max. 15 A; max. 1 AC cycle For signal "0" residual current, max. 2 mA Output delay with resistive load "0"...
Page 22
Technical specifications 6ES7522-5FF00-0AB0 Electrical isolation Electrical isolation of channels Between the channels Between the channels, in groups of Between the channels and backplane bus Between the channels and load voltage L1 Permitted potential difference Between different circuits 250 V AC between the channels and the back- plane bus;...
Page 23
Technical specifications Power reduction (derating) to aggregate current of outputs (per module) The following graphs show the loading capacity of the outputs in relation to the mounting position of the S71500 automation system/ET 200MP distributed I/O system and the ambient temperature.
Dimensional drawing The dimensional drawing of the module on the mounting rail, as well as a dimensional drawing with open front cover, are provided in the appendix. Always observe the specified dimensions for installations in cabinets, control rooms, etc. Figure A-1 Dimensional drawing of the DQ 8x230VAC/2A ST module Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0) Manual, 09/2016, A5E03485733-AD...
Page 25
Dimensional drawing Figure A-2 Dimensional drawing of the DQ 8x230VAC/2A ST module, side view with open front cover Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0) Manual, 09/2016, A5E03485733-AD...
0 and 1 are not read back. You get the diagnostics data records 0 and 1 for the read back parameter data records 0 and 1. You can find more information in the Interrupts section of the PROFIBUS DP interface module device manual on the Internet (http://support.automation.siemens.com/WW/view/en/78324181). Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0) Manual, 09/2016, A5E03485733-AD...
Page 27
Parameter data records B.1 Parameter assignment and structure of the parameter data records Assignment of data record and channel The channel parameters of the module are included in data records 64 to 71 and are assigned as follows: ● Data record 64 for channel 0 ●...