04
Getting started
Chapter 4
Getting started
Switching on and setting up
When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator. This takes you through setting the clock and
the internal TV tuner settings.
If you're using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
1
Switch on your TV and set the video input to this
recorder.
2
Press the
control or the front panel to switch on.
When you switch on for the first time, your TV should
display the Setup Navigator screen. (If the Setup
Navigator doesn't appear, you can also access it from the
Initial Setup menu; see page 45).
20
En
STANDBY/ON
ENTER
DVD RECORDER
STANDBY/ON button on the remote
3
Use the
(cursor left/right) buttons to select
English, French or Spanish as the on-screen display
(OSD) language, then press ENTER.
OSD Language
OSD Language
English
4
Press ENTER again to start setting up using the
Setup Navigator.
Setup Navigator
Complete this setup before you start using your recorder.
Start
Cancel
Please use the Initial Setup if you want to make more
detailed settings.
• If you don't want to use the Setup Navigator, press
(cursor down) to select Cancel, then press ENTER to
exit the Setup Navigator.
5
Use the
(cursor up/down) buttons to select
'Antenna' or 'Cable' depending on how you receive
your terrestrial TV channels, then press ENTER.
You can also select Do not set if you don't need the
recorder to retune all the channels (if you're using the
Setup Navigator for a second time, for example).
Tuner
Antenna
Cable
Do not set
After selecting Antenna or Cable the recorder starts
automatic tuning. This takes a couple of minutes to
complete.
Tuning
Please wait a moment.
20/68
Cancel