Connecting To The Auxiliary Port - Cisco ASR 902U Hardware Installation Manual
Hide thumbs
Also See for ASR 902U:
- Hardware installation manual (39 pages) ,
- Troubleshooting manual (18 pages)
Table of Contents
Advertisement
Connecting to the Auxiliary Port
Connecting to the Auxiliary Port
When a modem is connected to the auxiliary port, a remote user can dial in to the router and configure it. Use
a light blue console cable and the DB-9-to-DB-25 connector adapter.
Note
The console cable and DB-9-to-DB-25 connector are not included with the Cisco ASR 902 Router; they
can be ordered separately from Cisco.
To connect a modem to the auxiliary port on the router, follow these steps:
Step 1
Connect the RJ45 end of the adapter cable to the black AUX port on the router, as shown in the figure below.
Figure 55: Connecting a Modem to the Cisco ASR 902 Router
Label
1
2
Cisco ASR 902 and ASR 902U Aggregation Services Router Hardware Installation Guide
100
Component
RJ45 AUX port
RJ45 to DB-9 cable
Installing the Cisco ASR 902 Router
Label
3
4
Component
DB-9 to DB-25 adapter
Modem
Advertisement
Table of Contents
