Brother GTX-4 Instruction Manual page 201
Hide thumbs
Also See for GTX-4:
- Instruction manual (18 pages) ,
- Service manual (501 pages) ,
- Setup manual (37 pages)
Table of Contents
Advertisement
Selecting a type of head cleaning from the menu to perform the head cleaning
While the printer is in standby mode press
(1)
(2)
From the menu, select [Head Cleaning], and press
(3)
By pressing
press
.
<TIPS>
For selecting a desired cleaning option, follow the instructions of each procedural step described in "9-2-1. Recovery action
to be taken for such a nozzle that is unable to eject ink-jet droplets >>P.245".
By pressing
(4)
Magenta], and press
<TIPS>
Under the condition that the nozzle which has been confirmed with reference to "7-2-1. Print out of the nozzle check pattern
(checking on the print heads) >>P.198" is not ejecting ink-jet droplets, determine the color(s) of print heads for which the
head cleaning should be performed.
(5)
Then, the head cleaning will be performed for the specified print heads.
<TIPS>
The cleaning operation cannot be canceled halfway.
After the procedures are completed, the current screen will go back to the standby mode screen.
Precautions to keep good printing quality/use printer over the long term
, select one of the options; [Normal Cleaning], [Powerful Cleaning] or [Super Cleaning], and
, select one of the options; [All Colors], [All Whites], [All Print Heads], [Black] or [Yellow Cyan
.
on the operation panel to bring the menu screen into the view.
.
201
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
