Related Manuals for D-Link DSL-2885A
Summary of Contents for D-Link DSL-2885A
-
Page 1: User Manual
Version 1.00 | User Manual Wireless AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router DSL-2885A... -
Page 2: Preface
Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. -
Page 3: Table Of Contents
Setup Wizard ................15 Website Filter ................71 Static Routes .................72 ..............23 IPv6 ..................73 Home ....................24 Dynamic DNS ...............74 Internet ...................24 IPv6 Host ................75 DSL-2885A ................25 Management ................76 Connected Clients ..............26 Time & Schedule ..............76 USB Device ................28 Settings ..................29 D-Link DSL-2885A User Manual... - Page 4 Windows® XP ................97 WPA/WPA2 ................98 Troubleshooting ............100 Wireless Basics ...............104 What is Wireless? ..............105 Tips ....................107 Wireless Modes ................. 108 Networking Basics ............109 Check your IP address ............109 Statically Assign an IP address ..........110 D-Link DSL-2885A User Manual...
-
Page 5: Product Overview
Phone Cable If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DSL-2885A will cause damage and void the warranty for this product. -
Page 6: System Requirements
Utility Requirements • Firefox 11 or higher • Safari 5 or higher • Chrome 17 or higher Windows ® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. D-Link DSL-2885A User Manual... -
Page 7: Introduction
SharePort technology lets you take advantage of the USB 2.0 porst found on the back and side of your DSL-2885A (as well as an additional USB 2.0 port). Plug in a USB storage drive and you can access files, stream videos, view photos, or listen to music on your laptop or mobile devices. -
Page 8: Features
Section 1 - Product Overview Features • Faster Wireless Networking - The DSL-2885A introduces Smart Connect, a new D-Link feature which when combined with an additional 5 Ghz antenna can provide up to a full 1200 Mbps wireless connection with concurrent 801.11ac and 802.11n wireless clients . -
Page 9: Hardware Overview
Insert a paperclip in the hole and wait for several seconds to reset the router to default settings. Power Connector Connector for the supplied power adapter. Power Button Press the power button to power on and off. D-Link DSL-2885A User Manual... -
Page 10: Side Panel
Connect a USB flash drive to share content , or connect it to a USB printer to share it on your network. WPS Button Press to start the WPS process and automatically create a secure connection to a WPS client. Wi-Fi Button Press and hold for 2 seconds to enable or disable Wi-Fi. D-Link DSL-2885A User Manual... -
Page 11: Leds
Blinking Green A blinking green light indicates the DSL port is negotiating a connection. Solid Green A solid green light indicates an Internet connection. Internet Solid Red A solid red light indicates no Internet connection is available. D-Link DSL-2885A User Manual... -
Page 12: Installation
Note: This installation section is written for users who are setting up their home Internet service with the DSL-2885A Wireless AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router for the first time. If you are replacing an existing DSL modem and/or router, you may need to modify these steps. -
Page 13: Wireless Installation Considerations
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. -
Page 14: Manual Setup
Connect the phone cable from the DSL port on the microfilter to the DSL port of the modem router. Caution: - To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. DSL-2885A DSL-2885A Phone Cable Microfilter D-Link DSL-2885A User Manual... - Page 15 Press the power button and verify that the power LED is lit. Allow one minute for the router to boot up. After the modem router has powered up, verify that the Power and DSL LEDs are both lit. D-Link DSL-2885A User Manual...
- Page 16 Section 2 - Installation If you wish to use a wired connection, connect the Ethernet cable from a LAN port of the DSL-2885A to the Ethernet port on your computer. Ethernet Cable Computer If you wish to use a wireless connection, the default Wi-Fi Networks are dlink-2885A-z and dlink-2885A5G-z.
-
Page 17: Getting Started
There are two ways you can configure your router to connect to the Internet and connect to your clients: • D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to page "Setup Wizard"... - Page 18 IP Address: Enter a specific IP address for this client. Reserve IP: Enable to reserve this IP address for this client. Parental Allow or Block access to the router. Control: Click Save when you are done. D-Link DSL-2885A User Manual...
- Page 19 For Static IP refer to Static IP on page 31. For PPPoE refer to PPPoE on page 32. For PPPoA refer to PPPoA on page 33. For PPTP refer to PPTP on page 34. For L2TP refer to L2TP on page 36. D-Link DSL-2885A User Manual...
- Page 20 The default MAC address is set to the Internet port’s physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DSL-2885A User Manual...
- Page 21 The default MAC address is set to the Internet port’s physical interface Clone: MAC address on the router. You can use drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DSL-2885A User Manual...
-
Page 22: Internet
Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DSL-2885A User Manual... -
Page 23: Internet
Enter the IP address provided by your ISP (Static IP only). Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. Server: Click Save when you are done. D-Link DSL-2885A User Manual... - Page 24 Enter the subnet mask provided by your ISP (Static IP only). Mask: PPTP Gateway Enter the gateway IP address provided by your ISP (Static IP only). IP Address: Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: D-Link DSL-2885A User Manual...
- Page 25 Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DSL-2885A User Manual...
- Page 26 Enter the subnet mask provided by your ISP (Static IP only). Mask: L2TP Gateway Enter the gateway IP address provided by your ISP (Static IP only). IP Address: Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: D-Link DSL-2885A User Manual...
- Page 27 Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DSL-2885A User Manual...
-
Page 28: Dsl
On this page you can configure your DSL settings. If you are unsure, you can obtain these settings from your ISP. Select whether to enable or disable each DSL modulation option. Modulation: Usually it is best to leave these at their defaults, unless otherwise instructed by your ISP. Click Save when you are done. D-Link DSL-2885A User Manual... -
Page 29: Atm
Select the latency from the drop-down menu. Latency: Encapsulation: Select the method of encapsulation provided by your ISP. You can select LLC or VCMUX. ATM QoS: Select the Quality of Service type from the drop-down menu. Click Save when you are done. D-Link DSL-2885A User Manual... -
Page 30: Ptm
On this page you can configure your Packet Transfer Mode (ATM) settings. If you are unsure, you can obtain these settings from your ISP. Interface: Select the PTM interface from the drop-down menu. Latency: Select the latency from the drop-down menu. D-Link DSL-2885A User Manual... -
Page 31: Ipv6
For IPv6 in IPv4 Tunnel refer to IPv6 in IPv4 Tunnel on page 50. For 6 to 4 refer to 6 to 4 on page 52. For 6rd refer to 6rd on page 53. For Local Connectivity Only refer to Local Connectivity Only on page 55. D-Link DSL-2885A User Manual... -
Page 32: Auto Detection
Enable or disable automatic DHCP-PD services. DHCP-PD in LAN: Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Type: DHCPv6. Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DSL-2885A User Manual... -
Page 33: Static Ipv6
LAN IPv6 Enter the LAN (local) IPv6 address for the router. Address: LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: Enable Check to enable the Automatic IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: D-Link DSL-2885A User Manual... - Page 34 Section 4 - Configuration Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Type: DHCPv6. Enter the IPv6 address lifetime (in minutes). Router Advertisement Lifetime: Click Save when you are done. D-Link DSL-2885A User Manual...
- Page 35 LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: Enable Enable or disable the Automatic IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: Enable Enable or disable automatic DHCP-PD services. Automatic DHCP-PD in LAN: D-Link DSL-2885A User Manual...
- Page 36 Section 4 - Configuration Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Type: DHCPv6. Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DSL-2885A User Manual...
- Page 37 If you selected Use the following DNS address above, enter the Server: primary DNS server address. Secondary DNS If you selected Use the following DNS address above, enter the Server: secondary DNS server address. Enable DHCP- Enable or disable prefix delegation services. D-Link DSL-2885A User Manual...
- Page 38 /63. Contact your ISP for more information. Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Type: DHCPv6. Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DSL-2885A User Manual...
-
Page 39: Ipv6 In Ipv4 Tunnel
If you selected Use the following DNS address above, enter the Server: secondary DNS server address. Enable DHCP- Enable or disable prefix delegation services. LAN IPv6 If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the Address: router. D-Link DSL-2885A User Manual... - Page 40 Enable or disable automatic DHCP-PD services. Automatic DHCP-PD in LAN: Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6. Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DSL-2885A User Manual...
- Page 41 Enter the 6rd border relay IPv4 address settings supplied by your ISP (manual configuration only). Relay IPv4 Address: Enter the LAN (local) IPv6 address for the router. LAN IPv6 Address: LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: D-Link DSL-2885A User Manual...
- Page 42 Check to enable the Automatic IPv6 Address Assignment feature. IPv6 Address Assignment: Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Type: DHCPv6. Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DSL-2885A User Manual...
- Page 43 ULA Prefix: If you wish to choose your own ULA prefix, enter it here. Current IPv6 This section will display the current settings for your IPv6 ULA. ULA Settings: Click Save when you are done. D-Link DSL-2885A User Manual...
-
Page 44: Wireless
The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network. Turbo Mode: NEED TEXT NEED TEXT NEED TEXT NEED TEXT NEED TEXT NEED TEXT NEED TEXT NEED TEXT NEED TEXT NEED TEXT NEED TEXT D-Link DSL-2885A User Manual... - Page 45 20 MHz if you are not using any 802.11n wireless clients. Wi-Fi Protected Setup Trigger PBC: Press this button to initiate a Wi-Fi Protected Setup (WPS) pairing. Click Save when you are done. D-Link DSL-2885A User Manual...
-
Page 46: Multiple Ssid
Internet Access Enabling this option will confine connectivity to the Internet, Only: disallowing guests from accessing other local network devices. Click Save when you are done. D-Link DSL-2885A User Manual... -
Page 47: Network
Enter the starting and ending IP addresses for the DHCP server’s IP Address Range: assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. D-Link DSL-2885A User Manual... - Page 48 Enable to allow IPv4 multicast traffic to pass through the router from Stream: the Internet. IPv6 Multicast Enable to allow IPv6 multicast traffic to pass through the router from Stream: the Internet. Click Save when you are done. D-Link DSL-2885A User Manual...
-
Page 49: Shareport
FTP. If this is enabled, enter the Remote FTP Port, Maximum Users, Login Timeout, and the Maximum Idle Time. Click Save when you are done. To manage user accounts for SharePort access, click Create User and refer to the next page for details. D-Link DSL-2885A User Manual... -
Page 50: Create User
Browse and browse to the desired folder. Click OK when you are done. The new user should be added to the list of user accounts. To save the new list, click Save. To return to the SharePort page, click SharePort. D-Link DSL-2885A User Manual... -
Page 51: Firewall Settings
Checking: IPv6 Simple Enable or disable IPv6 simple security. Security: IPv6 Ingress Enable or disable IPv6 ingress filtering. Filtering: PPTP: Allows multiple machines on the LAN to connect to their corporate network using the PPTP protocol. D-Link DSL-2885A User Manual... - Page 52 NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link DSL-2885A User Manual...
-
Page 53: Ipv4/Ipv6 Rules
The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 76 for more information. Click Apply when you are done. D-Link DSL-2885A User Manual... -
Page 54: Port Forwarding
Schedule: will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to 76 for more information. Click Apply when you are done. D-Link DSL-2885A User Manual... -
Page 55: Virtual Server
The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 76 for more information. Click Apply when you are done. D-Link DSL-2885A User Manual... -
Page 56: Website Filter
Create New Rule. Next, under Website URL/Domain enter the URL or domain. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain. Click Save when you are done. D-Link DSL-2885A User Manual... -
Page 57: Static Routes
A value 1 is the lowest cost and 15 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link DSL-2885A User Manual... -
Page 58: Ipv6
Metric: Enter the metric value for this rule here. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link DSL-2885A User Manual... -
Page 59: Dynamic Dns
Enter a timeout time (in hours). Click Save when you are done. At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic DNS host, refer to 74 for more information. D-Link DSL-2885A User Manual... -
Page 60: Ipv6 Host
Enter the host name that you registered with your dynamic DNS service provider. IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click Apply when you are done. D-Link DSL-2885A User Manual... -
Page 61: Management
Click Save when you are done. To configure and manage your schedules, click Schedule and refer to page 76 for more information. D-Link DSL-2885A User Manual... -
Page 62: Schedule
You can add multiple days to the schedule, but only one period per day. To remove a time period from the schedule, click on the cross icon. Click Apply when you are done. D-Link DSL-2885A User Manual... -
Page 63: System Log
The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 76 for more information. Click Save when you are done. D-Link DSL-2885A User Manual... -
Page 64: Admin
Internet by a web browser. A password is still required to access the web management interface. Remote Admin The port number used to access the DSL-2885A is used in the URL. Port: Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DSL-2885A and 8080 is the port used for the web management interface. - Page 65 If you enabled remote management, enter the remote port number that the router will use for that protocol. Click Save when you are done. To load, save, or reset settings, or reboot the router, click Save. D-Link DSL-2885A User Manual...
-
Page 66: Upgrade
Firmware: wish to upgrade to. Next, click the Upgrade Firmware button and browse to the file to install the new firmware. You can also browse to a language pack file to install a new language pack. D-Link DSL-2885A User Manual... -
Page 67: Statistics
You can view the Internet, LAN, Wi-Fi 2.4 GHz, or Wi-Fi 5 GHz by clicking on the respective tabs at the top. The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link DSL-2885A User Manual... -
Page 68: Connect A Wireless Client To Your Router
WPS. Once you know, follow the steps below: Step 1 - Press the WPS button on the DSL-2885A for about 1 second. The Internet LED on the front will start to blink. WPS Button Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS process). -
Page 69: Windows® 8
Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DSL-2885A User Manual... - Page 70 WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DSL-2885A User Manual...
-
Page 71: Windows® 7
If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DSL-2885A User Manual... - Page 72 If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DSL-2885A User Manual...
- Page 73 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DSL-2885A User Manual...
-
Page 74: Wps
Section 5 - Connecting to a Wireless Network The WPS feature of the DSL-2885A can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. - Page 75 Section 5 - Connecting to a Wireless Network 3. Double-click the DSL-2885A. DSL-2885A 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next. D-Link DSL-2885A User Manual...
- Page 76 Section 5 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DSL-2885A User Manual...
- Page 77 Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DSL-2885A User Manual...
-
Page 78: Windows Vista
(displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DSL-2885A User Manual... -
Page 79: Wpa/Wpa2
1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DSL-2885A User Manual... - Page 80 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DSL-2885A User Manual...
-
Page 81: Windows® Xp
Wi-Fi network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DSL-2885A User Manual... -
Page 82: Wpa/Wpa2
1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect. D-Link DSL-2885A User Manual... - Page 83 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. D-Link DSL-2885A User Manual...
-
Page 84: Troubleshooting
1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.1.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. - Page 85 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.
- Page 86 • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DSL-2885A User Manual...
- Page 87 • To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DSL-2885A User Manual...
-
Page 88: Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers. -
Page 89: What Is Wireless
Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. - Page 90 Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits • Gives everyone at home broadband access •...
-
Page 91: Tips
The wireless connection in public places is usually called “hotspots”. Using a D-Link CardBus adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centers. -
Page 92: Wireless Modes
• Ad-hoc – Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DSL-2885A wireless network CardBus adapters. An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. -
Page 93: Networking Basics
Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. -
Page 94: Statically Assign An Ip Address
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DSL-2885A User Manual... - Page 95 Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DSL-2885A offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) •...
- Page 96 Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11n, and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. • Frequency Range varies depending on country’s regulation. D-Link DSL-2885A User Manual...
-
Page 97: Regulatory Statements
Note The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link DSL-2885A User Manual... - Page 98 D-Link Coporation, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.
- Page 99 (8) If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable alarm equipment, consult your telephone company or a qualified installer. D-Link DSL-2885A User Manual...
- Page 100 This device is restricted from functioning in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication between two client devices without an Access Point. • Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in 5 GHz within the EU. D-Link DSL-2885A User Manual...
- Page 101 Spectrum Regulation MHz, Europa (ETSI) max. EIRP Innenbereich max. EIRP Außenbereich Europa 2400 - 2483.5 MHz 100 mW 100 mW Frankreich 2400 - 2454 MHz 100 mW 100 mW 2454 - 2483.5 MHz 100 mW 10 mW D-Link DSL-2885A User Manual...
- Page 102 (Channels 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, Norway, Poland, Sweden, Slovenia, Luxembourg, U.K., 140) Ireland, Slovak, Switzerland, Hungary, Italy 5.15-5.35 GHz & 5.725-5.875 GHz Czech Republic (Channels 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165, 169) D-Link DSL-2885A User Manual...
- Page 103 D-Link hereby, declares that this DSL-2885A is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish] Por medio de la presente D-Link declara que el DSL-2885A cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] ΜΕ...
- Page 104 D-Link declara que este DSL-2885A está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Slovensko [Slovenian] D-Link izjavlja, da je ta DSL-2885A v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ Slovensky [Slovak] D-Link týmto vyhlasuje, že DSL-2885A spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ Suomi [Finnish] D-Link vakuuttaa täten että...
- Page 105 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
- Page 106 D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.
- Page 107 D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.
- Page 108 D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
- Page 109 D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.
- Page 110 D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.
- Page 111 D-Link och miljön På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.