Qos Bandwidth Queue - HP HSR6800 Command Reference Manual
Acl and qos
Hide thumbs
Also See for HSR6800:
- Configuration manual (478 pages) ,
- Installation manual (146 pages) ,
- Troubleshooting manual (41 pages)
Table of Contents
Advertisement
Usage guidelines
If no interface is specified, this command displays the WFQ configuration of all the interfaces.
Examples
# Display the WFQ configuration of GigabitEthernet 1/0/1.
<Sysname> display qos wfq interface gigabitethernet 1/0/1
Interface: GigabitEthernet1/0/1
Output queue:
Queue ID
------------------------------------------------
0
1
2
3
4
5
6
7
Table 38 Command output
Field
Interface
Output queue
Queue ID
Min-Bandwidth
Related commands
qos wfq
qos bandwidth queue
Use qos bandwidth queue to set the minimum guaranteed bandwidth for a specified queue on the
port/port group.
Use undo qos bandwidth queue to cancel the configuration.
Syntax
qos bandwidth queue queue-id min bandwidth-value
undo qos bandwidth queue queue-id [ min bandwidth-value ]
Views
Interface view, port group view
Default command level
2: System level
Parameters
queue-id: Queue ID.
Hardware weighted fair queue
Weight
Min-Bandwidth
100
NA
1
200
1
NA
1
NA
1
NA
1
200
1
NA
1
NA
Description
Interface type and interface number.
Pattern of the current output queue.
ID of a queue.
Minimum guaranteed bandwidth in kbps. NA indicates that it is not configured.
120
Advertisement
Table of Contents
