Rule (Ipv6 Advanced Acl View) - HP HSR6800 Command Reference Manual
Acl and qos
Hide thumbs
Also See for HSR6800:
- Configuration manual (478 pages) ,
- Installation manual (146 pages) ,
- Troubleshooting manual (41 pages)
Table of Contents
Advertisement
fragment: Applies the rule only to non-first fragments. A rule without this keyword applies to both
fragments and non-fragments.
logging: Logs matching packets. This function is available only when the application module (such as the
firewall) that uses the ACL supports the logging function.
source { source-address source-wildcard | any }: Matches a source address. The source-address
source-wildcard arguments represent a source IP address and wildcard mask in dotted decimal notation.
A wildcard mask of zeros specifies a host address. The any keyword represents any source IP address.
time-range time-range-name: Specifies a time range for the rule. The time-range-name argument is a
case-insensitive string of 1 to 32 characters. It must start with an English letter. If the time range is not
configured, the system creates the rule. However, the rule using the time range can take effect only after
you configure the timer range.
vpn-instance vpn-instance-name: Applies the rule to packets in a VPN instance. The vpn-instance-name
argument takes a case-sensitive string of 1 to 31 characters. If no VPN instance is specified, the rule
applies only to non-VPN packets.
Usage guidelines
Within an ACL, the permit or deny statement of each rule must be unique. If the ACL rule you are creating
or editing has the same deny or permit statement as another rule in the ACL, your creation or editing
attempt fails.
To view rules in an ACL and their rule IDs, use the display acl all command.
Examples
# Create a rule in IPv4 basic ACL 2000 to deny the packets from any source IP segment but 10.0.0.0/8,
172.17.0.0/16, or 192.168.1.0/24.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 10.0.0.0 0.255.255.255
[Sysname-acl-basic-2000] rule permit source 172.17.0.0 0.0.255.255
[Sysname-acl-basic-2000] rule permit source 192.168.1.0 0.0.0.255
[Sysname-acl-basic-2000] rule deny source any
Related commands
acl
•
display acl
•
step
•
•
time-range
rule (IPv6 advanced ACL view)
Use rule to create or edit an IPv6 advanced ACL rule. You can edit ACL rules only when the match order
is config.
Use undo rule to delete an entire IPv6 advanced ACL rule or some attributes in the rule. If no optional
keywords are provided, this command deletes the entire rule. If optional keywords or arguments are
provided, this command deletes the specified attributes.
Syntax
rule [ rule-id ] { deny | permit } protocol [ { { ack ack-value | fin fin-value | psh psh-value | rst rst-value
| syn syn-value | urg urg-value } * | established } | counting | destination { dest-address dest-prefix |
22
Advertisement
Table of Contents
