hit counter script
Siemens SIMATIC S7-1500 Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Control Unit
  5. Simatic S7-1500
  6. Manual

Siemens SIMATIC S7-1500 Manual

Digital output module dq 8x230vac/5a st (6es7522-5hf00-0ab0)
Hide thumbs Also See for SIMATIC S7-1500:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, Manual
SIMATIC
S7-1500
Digital output module DQ 8x230VAC/5A ST (6ES7522-5HF00-0AB0)
Manual
Edition
07/2014
Answers for industry.

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMATIC S7-1500

Summary of Contents for Siemens SIMATIC S7-1500

  • Page 1 SIMATIC S7-1500 Digital output module DQ 8x230VAC/5A ST (6ES7522-5HF00-0AB0) Manual Edition 07/2014 Answers for industry.
  • Page 2 ___________________ DQ 8x230VAC/5A ST Digital Output Preface Module (6ES7522-5HF00-0AB0) ___________________ Documentation guide ___________________ Product overview SIMATIC ___________________ Wiring S7-1500/ET 200MP ___________________ DQ 8x230VAC/5A ST Digital Output Parameters/address space Module (6ES7522-5HF00-0AB0) ___________________ Interrupts/diagnostics alarms Manual ___________________ Technical specifications ___________________ Dimensional drawing ___________________ Parameter data records ___________________...
  • Page 3 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 4: Preface

    Preface Purpose of the documentation This manual supplements the system manuals: ● S7-1500 Automation System ● ET 200MP Distributed I/O System Functions that relate in general to the systems are described in these system manuals. The information provided in this manual and in the system/function manuals supports you in commissioning the systems.
  • Page 5 Siemens accepts no liability for the use of the open source software over and above the intended program sequence, or for any faults caused by modifications to the software.

  • Page 6: Table Of Contents

    Table of contents Preface ..............................3 Documentation guide ..........................6 Product overview ............................ 8 Properties ..........................8 Wiring ..............................11 Parameters/address space ........................14 Parameters ..........................14 Address space ........................15 Interrupts/diagnostics alarms ......................... 18 Status and error displays ......................18 Interrupts ..........................

  • Page 7: Documentation Guide

    This arrangement enables you to access the specific content you require. Basic information System Manual and Getting Started describe in detail the configuration, installation, wiring and commissioning of the SIMATIC S7-1500 and ET 200MP systems. The STEP 7 online help supports you in the configuration and programming. Device information Manuals contain a compact description of the module-specific information, such as properties, terminal diagrams, characteristics, technical specifications.
  • Page 8 Documentation guide Manual Collection S7-1500 / ET 200MP The Manual Collection contains the complete documentation on the SIMATIC S7-1500 automation system and the ET 200MP distributed I/O system gathered together in one file. You can find the Manual Collection on the Internet (http://support.automation.siemens.com/WW/view/en/86140384).

  • Page 9: Product Overview

    Product overview Properties Article number 6ES7522-5HF00-0AB0 View of the module Figure 2-1 View of the DQ 8x230VAC/5A ST module DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 10 Product overview 2.1 Properties Properties The module has the following technical properties: ● 8 digital outputs (relays) ● Supply voltage of the 24 V DC relay coils ● Rated output voltage 230 V AC (24 V DC up to 120 V DC/24 V AC up to 230V AC) ●...
  • Page 11 The following component must be ordered separately: Front connectors, including potential jumpers and cable ties You can find more information on accessories in the S7-1500 Automation System system manual (http://support.automation.siemens.com/WW/view/en/59191792) and the ET 200MP Distributed I/O System system manual (http://support.automation.siemens.com/WW/view/en/59193214).

  • Page 12: Wiring

    This section contains the block diagram of the module and outlines various connection options. For more information on front connector wiring and creating cable shields, for example, refer to the "Wiring" section in the S7-1500 Automation System (http://support.automation.siemens.com/WW/view/en/59191792) and ET 200MP distributed I/O system (http://support.automation.siemens.com/WW/view/en/59193214) system manuals. Abbreviations used...
  • Page 13 Wiring Block diagram and terminal assignment The example in the following figure shows the terminal assignment and the assignment of the channels. ① Backplane bus interface Figure 3-1 Block diagram and terminal assignment DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 14 Wiring Tip: Using the potential jumpers Use the potential jumpers supplied with the front connector if you want to distribute the 24V DC supply voltage to a neighboring module. This helps you to avoid having to terminate two wires to one terminal. Proceed as follows: 1.

  • Page 15: Parameters/Address Space

    Parameters/address space Parameters DQ 8x230VAC/5A ST parameters When you assign the module parameters in STEP 7, you use various parameters to specify the module properties. The following table lists the configurable parameters. The effective range of the configurable parameters depends on the type of configuration. The following configurations are possible: ●...

  • Page 16: Address Space

    Parameters/address space 4.2 Address space Address space The module can be configured differently in STEP 7; see following table. Depending on the configuration, additional/different addresses are assigned in the process image of the outputs/inputs. Configuration options of DQ 8x230VAC/5A ST You can configure the module with STEP 7 (TIA Portal) or with a GSD file.
  • Page 17 Parameters/address space 4.2 Address space Address space for configuration as 8-channel DQ 8x230VAC/5A ST The following figure shows the assignment of the address space for the configuration as a 8- channel module with value status. You can freely assign the start address for the module. The addresses of the channels are derived from the start address.
  • Page 18 Parameters/address space 4.2 Address space The following figure shows the assignment of the address space for submodules 1, 2, 3, and 4 and the value status. Figure 4-2 Address space for configuration as 1 x 8-channel DQ 8x230VAC/5A ST S MSO with val- ue status DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...

  • Page 19: Interrupts/Diagnostics Alarms

    Interrupts/diagnostics alarms Status and error displays LED displays The figure below shows the LED displays (status and error displays) of the DQ 8x230VAC/5A ST. Figure 5-1 LED displays of the module DQ 8x230VAC/5A ST DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 20 Interrupts/diagnostics alarms 5.1 Status and error displays Meaning of the LED displays The following tables explain the meaning of the status and error displays. Remedial measures for diagnostic alarms can be found in section Diagnostic alarms (Page 20). RUN and ERROR LED Table 5- 1 Status and error displays RUN and ERROR Meaning...

  • Page 21: Interrupts

    Interrupts/diagnostics alarms 5.2 Interrupts Interrupts Digital output module DQ 8x230VAC/5A ST supports diagnostic interrupts. Diagnostic interrupt The module generates a diagnostic interrupt at the following event: ● Missing supply voltage L+ For more information on the error event, refer to the error OB with the "RALRM" instruction (read additional interrupt info) and to the STEP 7 Online Help.

  • Page 22: Technical Specifications

    Technical specifications Technical specifications of the DQ 8x230VAC/5A ST 6ES7522-5HF00-0AB0 Product type designation DQ 8x230VAC/5A ST (Relay) General information Hardware version Firmware version V2.0.0 Product function I&M data Yes; IM0 to IM3 Engineering with STEP 7 TIA Portal can be configured/integrated V12.0 / V12.0 as of version STEP 7 can be configured/integrated as of version as of V5.5 SP3 / -...
  • Page 23 Technical specifications 6ES7522-5HF00-0AB0 Switching capacity of outputs With lamp load, max. 1500 W; (10,000 switching cycles) Low energy/fluorescent lamps with electronic 10 x 58 W (25,000 switching cycles) control gear Fluorescent tubes, conventionally compensated 1 x 58 W (25,000 switching cycles) Fluorescent tubes, uncompensated 10 x 58 W (25,000 switching cycles) Output current...
  • Page 24 Technical specifications 6ES7522-5HF00-0AB0 Cable length Cable length shielded, max. 1000 m Cable length unshielded, max. 600 m Isochronous mode Isochronous mode (application synchronized up to terminal) Interrupts/diagnostics/status information Substitute values can be applied Interrupts Diagnostics interrupt Diagnostics alarms Diagnostics Monitoring of supply voltage Wire break Short-circuit Diagnostics indicator LED...
  • Page 25 Technical specifications 6ES7522-5HF00-0AB0 Distributed mode Prioritized startup Dimensions Width 35 mm Height 147 mm Depth 129 mm Weights Weight, approx. 350 g Power reduction (derating) to aggregate current of outputs (per channel) The following graphs show the loading capacity of the relay contacts in relation to the mounting position and the ambient temperature.
  • Page 26 Technical specifications Details on the number of switching cycles The following tables list the permissible number of switching cycles depending on the applied voltage and current load. Different values apply in each case to resistive and inductive loads. Table 6- 1 Switching capacity and service life of relay contacts for resistive load For resistive load Voltage...
  • Page 27 Technical specifications Table 6- 2 Switching capacity and lifetime of the relay contacts for inductive load For inductive load Voltage Current Number of switching cycles (typ.) 24 V DC 2.5 A 0.25 million 2.0 A 0.3 million 1.0 A 0.5 million 0.5 A 1.0 million 0.2 A...

  • Page 28: Dimensional Drawing

    Dimensional drawing The dimensional drawing of the module on the mounting rail, as well as a dimensional drawing with open front cover, are provided in the appendix. Always observe the specified dimensions for installations in cabinets, control rooms, etc. Figure A-1 Dimensional drawing of the DQ 8x230VAC/5A ST module DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 29 Dimensional drawing Figure A-2 Dimensional drawing of the DQ 8x230VAC/5A ST module, side view with open front cover DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...

  • Page 30: Parameter Data Records

    0 and 1 are not read back. You get the diagnostics data records 0 and 1 for the read back parameter data records 0 and 1. You can find more information in the Interrupts section of the PROFIBUS DP interface module device manual on the Internet (http://support.automation.siemens.com/WW/view/en/78324181). DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 31 Parameter data records B.1 Parameter assignment and structure of the parameter data records Assignment of data record and channel The channel parameters of the module are included in data records 64 to 71 and are assigned as follows: ● Data record 64 for channel 0 ●...

  • Page 32: Open Source Software

    License Conditions and Disclaimers for Open Source Software and other Licensed Software In the product "Digital Modules, Analog Modules, Technological Modules, Communication Modules and Power Supply Modules of the SIMATIC S7-1500, ET 200MP", Copyright Siemens AG, 2013 - 2014 (hereinafter "Product"), the following Open Source Software is used either unchanged or in a form that we have modified, and additionally the other License Software noted below.
  • Page 33 Open Source Software DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 34 Open Source Software DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 35 Open Source Software DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 36 Open Source Software DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 37 Open Source Software DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 38 Open Source Software DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 39 Open Source Software DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 40 Open Source Software DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 41 Open Source Software DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 42 Open Source Software DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...
  • Page 43 Open Source Software DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0) Manual, 07/2014, A5E03485590-AC...

Table of Contents