Snmp Host Table Settings - D-Link DGS-3630 Series Reference Manual
Layer 3 stackable managed switch web ui reference guide
Hide thumbs
Also See for DGS-3630 Series:
- Reference manual (184 pages) ,
- Hardware installation manual (71 pages) ,
- User manual (9 pages)
Table of Contents
Advertisement
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
SNMP Version
SNMP V3 Encryption
Auth-Protocol by Password
Password
Priv-Protocol by Password
Password
Auth-Protocol by Key
Key
Priv-Protocol by Key
Key
IP Address-List Name
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
SNMP Host Table Settings
This window is used to display and configure the recipient of the SNMP notification.
To view the following window, click Management > SNMP > SNMP Host Table Settings, as shown below:
Description
Select the SNMP version. Options to choose from are v1, v2c, and v3.
When selecting v3 in the SNMP Version drop-down list, this option is available.
Options to choose from are None, Password, and Key.
When selecting v3 in the SNMP Version drop-down list, and selecting Password
in the SNMP V3 Encryption drop-down list, this option is available. Select the
authentication level. Options to choose from are the following:
• MD5 - Select to use the HMAC-MD5-96 authentication level. This field will
require the user to enter a password or key.
• SHA - Specify that the HMAC-SHA authentication protocol will be used. This
field will require the user to enter a password or key.
Enter the Auth-Protocol password here. For MD5 this password must be
between 8 and 16 characters long. For SHA this password must be between 8
and 20 characters long.
When selecting v3 in the SNMP Version drop-down list, and selecting Password
in the SNMP V3 Encryption drop-down list, this option is available. Select the
private protocol. Options to choose from are the following:
• None - Specify that no authorization protocol is in use.
• DES56 - Specify that DES 56-bit encryption is in use, based on the CBC-
DES (DES-56) standard. This field will require the user to enter a password
or a key.
Enter the Priv-Protocol password here. For none, this field will be disabled. For
DES56 this password must be between 8 and 16 characters long.
When selecting v3 in the SNMP Version drop-down list, and selecting Key in the
SNMP V3 Encryption drop-down list, this option is available. Select the
authentication level. Options to choose from are the following:
• MD5 - Select to use the HMAC-MD5-96 authentication level. This field will
require the user to enter a password or a key.
• SHA - Specify that the HMAC-SHA authentication protocol will be used. This
field will require the user to enter a password or a key.
Enter the Auth-Protocol key here. For MD5 this key must be 32 characters long.
For SHA this key must be 40 characters long.
When selecting v3 in the SNMP Version drop-down list, and selecting Key in the
SNMP V3 Encryption drop-down list, this option is available. Select the private
protocol. Options to choose from are the following:
• None - Specify that no authorization protocol is in use.
• DES56 - Specify that DES 56-bit encryption is in use, based on the CBC-
DES (DES-56) standard. This field will require the user to enter a password
or a key.
Enter the Priv-Protocol key here. For none, this field will be disabled. For DES56
this key must be 32 characters long.
Enter the standard IP access control list (ACL) to associate with the user.
44
Advertisement
Table of Contents
