Table of Contents
Advertisement
Quick Links
LG CodePlus OAT100R Warranty
Welcome to the LG family! We believe that you will be pleased with your new CodePlus OAT100R
Broadcast Products
Off Air Transcoder System. Please read this warranty carefully, it is a "LIMITED WARRANTY" as
defined under Federal Law. This warranty gives you specific legal rights, and you may also have
other rights that vary from state-to-state within the U.S.A.
LG's RESPONSIBILITY
One year parts and labor from date of purchase or delivery date.
Warranty Term
New or remanufactured replacements for factory-defective parts may be used. Such replacement
Parts
parts are warranted for the remaining portion of the original warranty period.
Warranty service is provided at LG. Customer pays for shipping charges to LG; LG pays for return
Warranty Service
shipping charges to return the OAT100R to customer. Call 1-888-865-3026 for further information.
This warranty covers manufacturing defects and does not cover installation, adjustment of customer
Not Covered
controls, installation or repair of antenna systems, cable converters or cable company-supplied
equipment; it also does not cover damage due to misuse, abuse, negligence, acts of God or other
causes beyond the control of LG. Any alteration of the product after manufacture voids this warranty
in its entirety.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, AND LG SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL,
INDIRECT, OR INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR
PROFITS IN CONNECTION WITH THIS PRODUCT. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS
OR EXCLUSIONS MAY NOT APPLY TO YOU.
OWNER'S RESPONSIBILITY
Warranty begins on the date of delivery of the OAT100R.
Effective Warranty Date
For your convenience, keep the dealer's dated bill of sale or delivery ticket as evidence of the
purchase date.
Read the Installation & Setup Guide carefully so that you will understand the operation of the
Installation Guide
OAT100R and how to adjust the settings.
For warranty service information, call 1-888-865-3026. Parts and service labor that are LG's
Warranty Service
responsibility (see above) will be provided without charge. Other service is at the owner's expense.
If you have any problem in obtaining satisfactory warranty service, call 1-888-865-3026.
You must provide the model number, serial number and date of purchase or date of original installation.
For Customer Support/Service, please call:
1-888-865-3026
www.LGsolutions.com
CodePlus is a trademark of LG Electronics U.S.A., Inc. Pro:Idiom is a
registered trademark of Zenith Electronics LLC. All other trademarks or
registered trademarks are the property of their respective owners.
© Copyright 2012 LG Electronics U.S.A., Inc.
206-4219
Revision A
© Copyright 2012 LG Electronics U.S.A., Inc.
CodePlus™ OAT100R Off Air
Transcoder System
Installation & Setup
Quick Reference | Warranty
The latest product information and documentation is available online at:
www.LGsolutions.com/products
P/N: 206-4219 (Rev A)
Advertisement
Table of Contents
Related Manuals for LG CodePlus OAT100R
Summary of Contents for LG CodePlus OAT100R
- Page 1 LG CodePlus OAT100R Warranty Welcome to the LG family! We believe that you will be pleased with your new CodePlus OAT100R Broadcast Products Off Air Transcoder System. Please read this warranty carefully, it is a “LIMITED WARRANTY” as defined under Federal Law. This warranty gives you specific legal rights, and you may also have other rights that vary from state-to-state within the U.S.A.
-
Page 2: Open Source Software Notice
CAUTION: so, subject to the following conditions: Copyright © 1999 Dug Song Do not attempt to modify this product in any way without written authorization from LG Copyright © 1999 Aaron Campbell SUBJECT TO THE TERMS OF THE GPL VERSION Electronics U.S.A., Inc. -
Page 3: Important Safety Instructions
When a cart is used, use caution when 20. Test Equipment moving the cart/apparatus combination In some cases, LG has supplied or recom- in order to avoid injury from tip-over. mended the use of test equipment and devices for the setup and testing of the equipment. The 13. -
Page 4: Specifications
IMPORTANT SAFETY INSTRUCTIONS Specifi cations 24. Safety Check (Continued from previous page) Dimensions Upon completion of any service or repairs to Height: 1.692 inches (42.977 mm) this product, ask the service technician to 21. Damage Requiring Service Width: 19.0 inches (482.6 mm) with mounting brackets attached Unplug this product from the wall power out- perform safety checks to determine that the (for EIA standard 19-inch rack mount) -
Page 5: Troubleshooting
Troubleshooting IMPORTANT SAFETY INSTRUCTIONS This section provides introductory OAT100R installation and setup troubleshooting E. Mains Outlet Earthing (Continued from previous page) information. Refer to the extended Installation & Setup Guide for additional trouble- The apparatus with Class I construction must be connected to a mains socket outlet with a shooting information. - Page 6 System Setup (Cont.) (Continued from previous page) The LG CodePlus™ OAT100R Off Air Transcoder System provides a flexible solution for system providers who provide terrestrial delivered DTV content to commercial facilities 24. At the next Tuner Command > prompt, type info and press Enter, and then check (hotels, hospitals, etc.).
-
Page 7: Setup Information
VHF and/or UHF antennas must be installed before you proceed to set up the The system will identify the current tuner and then display a tuner command prompt, OAT100R. LG recommends that the system be professionally installed. for example: Check the following items before you begin OAT100R installation and setup procedures. - Page 8 Setup Information (Cont.) System Setup (Cont.) Channel Assignments for RF Output (Continued from previous page) __ Create a channel assignment plan for the installation site, or modify an existing plan e) Repeat steps (c) and (d) for each of the additional three tuners, as required. to incorporate the RF output of the OAT100R.
- Page 9 Enter to remap the tuner output to a different stream. Refer to the CodePlus OAT100R Off Air Transcoder System Installation & Setup The system will display confi rmation, for example: Guide for further installation and confi guration information.
-
Page 10: Rear And Front Panel Overviews
Rear and Front Panel Overviews System Setup (Cont.) (Continued from previous page) OAT100R Rear View Note: If you change the Control Port configuration, you will be prompted to reset the system. If you intend to modify additional configuration settings during the current session, you may wait until all changes are complete before you reset the system. -
Page 11: Rack Installation
System Setup (Cont.) Rack Installation (Continued from previous page) Typical Rack Installation 1. (Optional) As shipped, the OAT100R mounting brackets are attached fl ush with the 13. (IP output only) Complete OAT100R IP output configuration as follows: front of the unit (see diagram a). If desired, the mounting brackets may be detached a) If the Command >... - Page 12 Rack Installation (Cont.) System Setup (Cont.) (Continued from previous page) c) At the prompt, type the number that corresponds to the appropriate output mode and press Enter. Front View The system will confi rm your selection, for example: of Rack Cabinet 1 inch minimum Output mode is set: IP SERVICE...
-
Page 13: System Setup
In some instances, configuration steps must be performed before physical connections are made. OAT100R CodePlus Off Air Transcoder System Typical Setup Flow Chart for OAT100R with RF Output Copyright (c) 2010-2012 LG Electronics U.S.A., Inc. Copyright (c) 2010-2012 Zenith Electronics LLC 201-12301011 Version Distribution... - Page 14 Enter to refresh the screen.) 7. At the login as: prompt, type admin and press Enter. Then, type the admin user password (provided by LG) at the password: prompt. 8. At the Command > prompt, type info and press Enter. (Note that you can press Enter at any OAT100R command prompt to view current menu.)