Advertisement
Quick Links
s
RWB2007 User instructions
Content
Section 1 Introduction and features
Section 2 Factory settings
Section 3 Setting the On/Off times
Section 4 Boost/Advance
Section 5 Review Programme
Section 6 Setting Clock
Section 7 Service Interval*
1. Introduction
The RWB2007 is a 7-day or 5-day-and-2-day twin channel programmer for central heating and hot water.
Features
•
Large digital backlit display (timeout 5 minutes)
•
2 or 3 On/Off periods per day
•
"Advance" feature to bring forward the next On/Off period
•
"Boost" feature to give an immediate one hour On
•
Automatic summer/winter changeover (summer/winter changeover switch occurs at 02:00)
•
Selectable time formats (24-hour and 12-hour (am/pm))
•
Built-in calendar
•
Copy facility
•
Service Interval capable*
2. Factory settings
Before leaving the factory, the RWB2007 was programmed with the correct date and time with the following switching times de-
pendent on the Dip switch setting on the back of RWB (factory default 2 On/Off):
Monday - Friday
2 On/Off switching Times
On 06.00 Off 08.30
On 16.30 Off 22.30
Operating instructions
3. Setting the On/Off times
The RWB2007 is supplied with factory settings (see section 2). If you want to change the factory settings to your own times you
can do so easily. ON/OFF times are adjustable in 10-minute steps.
Setting the central heating
Sliding switch (1) to CH shows all the days of the week with a triangle under Mo. Press YES if you want to program Monday, or
press Day until the triangle goes under the required day, then press YES.
Setting times
The first ON time is 06.00. To change the time, press + or –. When you have reached the desired time, press YES. The first OFF
time is 08.30. Repeat the process until all times are entered for that day.
Note: LIMIT comes in the display if you try to move a programme time forward or backward and it comes up against an existing
time.
Copy
Copy YES/NO appears in the display if you want to copy to the next day. Press YES and repeat for each day that you want to be
the same. If you don't want to copy, press NO and then set times for each day. When all programming is complete, slide the
switch to RUN.
Siemens Building Technologies
3 On/Off switching Times
On 06:00 Off 08.30
On 12.00 Off 14.00
On 16.30 Off 22.30
Weekend
2 On/Off switching Times
On 07.00 Off 09.00
On 16.30 Off 23.00
Switch (1): Programming switch. When all programming has been
done this switch must be in Run.
Switch (2): This switch allows you to choose how the
RWB...operates.
Constant: The RWB is permanently ON
ALL DAY: The RWB switches on at the first ON and off at the last
OFF.
AUTO: The RWB switches automatically at the programmed
times.
A6V10464932_enGB_b
A6V10464932
3 On/Off switching Times
On 07:00 Off 09.00
On 12.00 Off 14.00
On 16.30 Off 23.00
2016-07-14
1/2
Advertisement
Related Manuals for Siemens RWB2007
Summary of Contents for Siemens RWB2007
- Page 1 3. Setting the On/Off times The RWB2007 is supplied with factory settings (see section 2). If you want to change the factory settings to your own times you can do so easily. ON/OFF times are adjustable in 10-minute steps.
- Page 2 The RWB2007 goes back to the normal mode if no buttons were pressed within 4 seconds. 6. Setting the time The RWB2007 comes preset with the correct date and time. Should you need to reset the time for any reason, move the pro- gramming slider to the clock symbol: Y appears in the display.