Paradox NVX80 Quick Start Manual
Motion detector
Hide thumbs
Also See for NVX80:
- Reference and installation manual (20 pages) ,
- Installation manual (35 pages) ,
- Installation quick manual (4 pages)
Advertisement
Quick Links
NVX80
Quick Start Guide
NVX80-EQ0
Product Description
The Paradox NVX80 motion detector is above and beyond anything in its class. The NVX80 fea-
tures resilience to extreme outdoor conditions, a series of active infrared anti-masking and
microwave proximity technologies to detect if anyone is trying to mask the detection, and
unparalleled detection performance using SeeTrue™ (patent pending). The NVX80 is the only
detector in the industry offering eight detection channels - 4x forward looking PIR channels (2x
quad interlock geometry sensors), 2x microwave channels and 2x standalone creep detector
(1quad sensor with interlock geometry).
SeeTrue™ significantly improves the detection of cloaked intruders trying to avoid PIR detec-
tion by means of using insulating materials such as heavy coats, cartons, umbrellas, etc.
The combination of advanced technologies found in the NVX80 overcomes technical obstacles
that traditional PIR detectors cannot, like the degrading effects of high temperature environ-
ments.
For the installer, "Easy Slide" installation, and first-in-industry full-color OLED display with intui-
tive menus, allows easy programming and installation without any mechanical setting (jump-
ers). The NVX80 also features diagnostic tools testing its PIR, anti-mask, and microwave
settings, as well as SoloTest™ for easy walk test execution.
The sleek, vandal-resistant, and built-tough NVX80 is the detector of choice for commercial,
industrial, and residential applications.
Consider the following before you begin installation of the NVX80.
Package Contents
Inspect to make sure you have the following items:
•
NVX80 Motion Detector
•
All-weather cover (for outdoor use)
•
Screws
•
Foam pad
Optional items may include:
•
Wall anchors
•
Additional screws
Mounting Considerations
Recommendations
•
Ensure that the unit's detection beams are perpendicular to the anticipated move-
ment (see beam patterns below)
•
Keep a minimum distance between adjoining NVX80 detectors to prevent MW
cross interference
•
The NVX80 can be placed under a roof, awning, or the all-weather cover can be
installed for outdoor installations
•
Install the detector within the suggested range: installing the unit lower than 2.5 m
/ 8 ft 2 in may compromise the Pet Immunity capability. Installing over 3.0 m / 9 ft 8
in may require use of our swivel bracket adjusted downward shifting the Pet
Immunity beam and neutralizing the creep zone. Installing the unit over 3.0 m / 10
ft does not affect the creep zone.
•
If the installation is near heavy traffic or objects beyond the required detection
range, adjust the MW sensitivity and/or tilt the detector downward.
Recommended Restrictions
•
Don't direct the unit's beams into swaying trees or bushes
•
Don't place the detector facing direct sunlight or near a heat source, as it might
interfere with the Active IR anti-mask feature
•
Don't place any objects, such as shelves, ledges or plants, below the unit
•
Don't place any reflective objects within 2 m / 6 ft. 6 in of the unit, as this may inter-
fere with the MW anti-mask capabilities
•
Don't use excessive force when handling the NVX80
Figure 1: Beam Patterns
Technical Specifications
SeeTrue™ Effective Range
Indoor use, two levels, secure and sterile, up to
12 m (36 ft)
Dual Anti-Mask
Selectable:
1) Active IR: Proximity and blocking comply /
surpass EN50131 grade 3 for all materials, liquid.
2) Active Microwave for movement detection.
Creep Zone Area
Up to 3 m (10 ft) 90° downward
Coverage Pattern
16m (52 ft) 90°
Installation Height
2.5 - 3.0m (8 - 10 ft). A bracket may be used for
installation requiring higher mounting.
Current Consumption
Typ. 80 mA, max. 100 mA
(at 12V)
Outputs
Relay 1: 1A 24 VDC
Relay 2 and 3: 150 mA / 24 VDC
Display
OLED, 16-bit, 96 x 64 pixels
Dimensions
9.8 cm x 22.9 cm x 9.2 cm (3.8 in x 9.0 in x 3.6 in)
Tamper
Dual : Cover and Wall
RF Immunity
10 V/m up to 2.7 GHz
Operating Temperature
-35º to 60º C (-31º to 140º F)
Bus Connection
Paradox EVO Series, 4 wires
Certification
EN 50131-2-4 Grade 3 Class IV;
Certification Body: Applica Test and Certification
Construction Materials
ASA UV Resistant
Programming
Interactive 4-button programming with graphic
menu display or via EVO bus
Weight
520 g (1.1 lb)
PIR Forward
2X quad sensors with interlock geometry
PIR Creep
1X quad sensor with interlock geometry
Microwave
Dual output 10.5 GHz
Power Up Time
Approximately 30 seconds
Humidity
5 - 95% RH non-condensing
Ingress Protection (IP) Rating
IP54 & IP55 (dust and water protection)
Pet Immunity
Suppress detection of animals: Settings for small
and large pets
Languages
English, Portuguese
Warranty
For complete warranty information, please visit www.paradox.com/terms. Your use of the Para-
dox product signifies your acceptance of all warranty terms and conditions. Paradox, Digiplex,
EVO, ENVY Series and Pet Immunity are trademarks or registered trademarks of Paradox Secu-
rity Systems (Bahamas) Ltd. or its affiliates in Canada, the United States and/or other countries.
For the latest product approvals, such as UL and CE, please visit www.paradox.com. © 2014 Par-
adox Security Systems Ltd. All rights reserved. Specifications may change without prior notice.
Patents
One or more of the following US patents may apply: 7046142, 6215399, 6111256, 6104319,
5920259, 5886632, 5721542, 5287111, and RE39406 and other pending patents may apply.
Canadian and international patents may also apply. Printed in Canada.
Advertisement
Related Manuals for Paradox NVX80
Summary of Contents for Paradox NVX80
- Page 1 Technical Specifications / 8 ft 2 in may compromise the Pet Immunity capability. Installing over 3.0 m / 9 ft 8 The Paradox NVX80 motion detector is above and beyond anything in its class. The NVX80 fea- SeeTrue™ Effective Range...
- Page 2 - 1 2 3 4 5 + nector. Sensitivity Note: Slide the front section of the NVX80 onto the back cover of the unit. The power up Test MW MW and Insert the protective foam into the NVX80’s opening to prevent element infiltration to sequence will automatically start (if power is being supplied) and takes about 30 seconds.