Network 1: Starting The Timer - Siemens SIMATIC S7 System Manual

Hide thumbs Also See for SIMATIC S7:

Table of Contents

Getting started

2.2 Creating the sample program

After you enter and save the program, you can download the program to the CPU.

Network 1: Starting the timer

To enter the contact for M0.0:

1. Either double-click the "Bit Logic" icon or click the plus sign (+) to display the bit logic

instructions.

2. Select the "Normally Closed" contact.

3. Hold down the left mouse button and drag the contact onto the first network.

4. Enter the following address for the contact: M0.0

5. Press the Return key to enter the address for the contact.

Notice the project tree and the pro-

gram editor. You use the project tree

to insert instructions into the networks

of the program editor by dragging and

dropping the instructions from the

"Instructions" portion of the Project

tree to the networks.

The Program Block folder in the pro-

ject tree contains all of the blocks of

your program.

The program editor toolbar icons pro-

vide shortcuts to PLC commands and

programming operation.

When M0.0 is off (0), this contact turns

on and provides power flow to start

System Manual, V2.3, 07/2017, A5E03822230-AF

S7-200 SMART

Show Quick Links

Table of Contents

Simatic s7-200 smart