Remote Control Buttons You can use the remote control up to a distance of about 23 feet from the TV. POWER Turns the TV on and off. Selects the TV mode directly. 3 NUMERIC BUTTONS Press to directly select a channel.
Page 3
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI Connecting to HDMI (High Definition Multimedia Interface) DVD Player or Cable Box / Satellite receiver (Set-Top Box) HDMI Cable (Not supplied) Connecting to DVI (Digital Visual Interface)
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables Connecting to Y, P DVD Player or Cable Box/ Satellite receiver (Set-Top Box) Audio Cable (Not supplied) Component Cable (Not supplied) Connecting a Camcorder Camcorder...
Each VCR has a different back panel configuration. ➢ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). Connecting to S-Video TV Rear Panel...
• Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a transmission system of digital audio in the form of a light wave that uses a glass conductor. ➢ 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
➢ Each PC has a different back panel configuration. ➢ When connecting a PC, match the color of the connection terminal to the cable. ➢ When using an HDMI/DVI cable connection, you must use the HDMI IN 2 terminal. TV Rear Panel...
The main menu appears on the screen. Its left side has five icons: Picture, Sound, Channel, Setup, Input. P ress the ▲ or ▼ button to select one of the icons. Then press the ENTER button to access the icon’s sub-menu.
When selecting the Cable TV system: Press the ENTER button to start the auto program. Press the ▲ or ▼ to select the correct analog signal cable system source from among STD, HRC, and IRC, then press the ENTER button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital.
➢ ➢ ➢ ► To Select the Source Use to select TV or other external input sources such as DVD players or Set-top/Cable boxes connected to the TV. R 50 Use to select the input source of your choice. Return ►...
This Plasma panel uses a panel consisting of sub pixels (2,359,296 (42inch)/3,147,264 (50inch)) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Page 12
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLD WIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención...