ARP Commands
Command Modes
Command History
Release
Release
6.0
When issued without keywords or arguments, the clear arp-cache command clears all entries in the ARP
Usage Guidelines
cache.
Task ID
Task
ID
cef
Examples
The following example shows how to remove traffic statistic entries from the ARP cache that match
the specified interface:
RP/0/# clear arp-cache traffic tengige 0/1/0/0 location 0/1/CPU0
The following example shows how to remove entries from the ARP cache that match the specified
location:
RP/0/# clear arp-cache location 0/1/CPU0
local-proxy-arp
To enable local proxy Address Resolution Protocol (ARP) on an interface, enter the local-proxy-arp command
in interface configuration mode. To disable local proxy ARP on the interface, enter the no form of this
command.
local-proxy-arp
no local-proxy-arp
This command has no keywords or arguments.
Syntax Description
Local proxy ARP is disabled on all interfaces.
Command Default
Interface configuration
Command Modes
Command History
Release
Release 6.0
Modification
This command was introduced.
Operations
execute
Modification
This command was introduced.
local-proxy-arp
ARP Commands
7