Related Manuals for Danfoss SVA-DH
Summary of Contents for Danfoss SVA-DH
- Page 1 Instructions SVA-DH, SVA-DL 250-300 Installation SVA-DL SVA-DH Fig. 1 Fig. 2 Fig. 4 Fig. 3 LB-feet DN 250-300 Fig. 5a Fig. 5b © Danfoss A/S (AC-SMC/MWA), 11-2011 DKRCI.PI.KG0.A3.02 / 520H0746...
- Page 2 SVA-DL SVA-DH Pos. C Pos. A Pos. B LB-feet LB-feet LB-feet DN 250-300 DN 250-300 DN 250-300 Fig. 9a Fig. 9b Fig. 9c LB-feet DN 250-300 SVA-DH SVA-DL Fig. 10 Fig. 11 DKRCI.PI.KG0.A3.02 / 520H0746 © Danfoss A/S (AC-SMC/MWA), 11-2011...
- Page 3 For welding procedure. Dismantling the valve further information please contact Danfoss. Do not remove the bonnet while the valve Be careful not to damage the teflon cone is still under pressure.
- Page 4 Assembly Remove any dirt from the body before the valve is assembled. Resposition the valve cone on the SVA-DH bonnet as described above with consideration to the U-sleeve seal. Check that the cone has been screwed back towards the bonnet before it is replaced in the valve body (fig.