Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. Chassis : MC-019E P/No. : 38289U0513A (Rev. No. 03)
Contents Important Precautions Location and function of controls Remote control handset Front panel Basic operation On and Off / Programme selection / Volume adjustment / Quick view / Mute function / On screen language selection (option) On screen menus Menu selection Setting up TV stations Auto programme tuning / Manual programme tuning / Assigning a programme name / Fine tuning /...
513A english Important Precautions This unit has been engineered and manufactured to assure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this TV set, observe the following basic rules for its installation, use and servicing.
Page 4
Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the TV set where the power cord is subject to damage. Power This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover.
Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set. Remote control handset Before you use the remote control handset, please install the batteries.
Page 6
Location and function of controls 12. LIST POWER MUTE displays the programme table. press TV/AV to clear the LIST table from the screen. 13. SLEEP sets the sleep timer. 14. SSM (option) (Sound status Memory) recalls your preferred sound setting. 15.
FRONT PANEL / SIDE PANEL Shown below is a simplified representation of front or side panel, here shown may be somewhat different from your set. VIDEO VIDEO (L)-AUDIO-(R) ON/OFF MENU OK/ VIDEO AUDIO AUDIO VIDEO ON/OFF MENU VIDEO AUDIO AUDIO 1.
Basic operation On and Off 1. Press the main power button to switch the set On. 2. If the set is in standby mode, press the POWER, TV/AV or NUMBER buttons on the remote control handset to switch it On fully. 3.
On screen menus The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed. Menu selection 1. Repeatedly press the MENU button to display each menu. 2.
Setting up TV stations PROGRAMME MENU Up to 200 programmes can be stored by programme numbers AUTO PROGRAMME (0 to199). Once you have preset the stations you will be able to use MANUAL PROGRAMME or NUMBER buttons to scan the stations you programmed. PROGRAMME EDIT Programmes can be tuned using automatic or manual modes.
Page 11
Setting up TV stations PROGRAMME MENU Manual programme tuning AUTO PROGRAMME MANUAL PROGRAMME Manual programme offer you to manually tune and arrange the PROGRAMME EDIT programme in whatever order you desire. Also you can assign a programme name with five characters to each. 1.
Page 12
Setting up TV stations PROGRAMME MENU Assigning a programme name SEARCH FINE 1. Repeat the 'Manual programme tuning' steps 1 to 3. STORAGE button to select Name. 2. Press the SYSTEM button on the Name pull-down menu. You can use a NAME 3.
Setting up TV stations PROGRAMME MENU Swapping programme AUTO PROGRAMME 1 . Select a programme to be swapped by pressing MANUAL PROGRAMME PROGRAMME EDIT button. 2. Press the YELLOW button. 3. Select a second programme to be swapped by pressing button.
Picture adjustment PROGRAMME MENU PSM (Picture Status Memory) AUTO PROGRAMME 1. Press the PSM button on the remote to change for desired PSM MANUAL PROGRAMME setting. PROGRAMME EDIT Note: PSM status change to user automatically when contrast, brightness, colour and sharpness set manually. You can also recall a desired picture (Dynamic, Standard, Mild Game, or User) with PSM button on the remote control.
Picture adjustment PICTURE MENU ARC (Aspect Ratio Control) CONTRAST BRIGHTNESS You can watch TV in various picture formats; Standard, Wide, COLOUR Zoom. Repeatedly press the ARC button to select your desired SHARPNESS picture format. PSM : USER Note :When you switch the set to standby or Off, the wide or Zoom picture format is reset to the Standard (4:3).
Sound adjustment (option) SSM (Sound Status Memory) SOUND MENU EQUALIZER You can select your preferred sound setting; Flat, Music, BALANCE Movie or Speech and you can also adjust the sound frequency of equalizer by pressing SSM button. Sound frequency adjustment (Equalizer) a.
Page 17
Sound adjustment (option) SOUND MENU Balance adjustment EQUALIZER You can adjust balance. BALANCE 1. Press the MENU button to select the Sound menu. button to select Balance. 2. Press the button and then on the Balance pull-down 3. Make desired adjustment with the menu.
Other functions Auto AV switching (option) SPECIAL MENU CHILD LOCK When your VCR outputs is connected to Euro scart socket and VCR AUTO SLEEP switch to playback, then set is automatically switched to AV mode BLUE BACK when an AV signal is input, but if you want to keep on watching TV GAME mode, press the or number buttons.
Page 19
Other functions SPECIAL MENU Auto sleep CHILD LOCK AUTO SLEEP If you select On in the Auto sleep pull-down menu, the set will BLUE BACK automatically switch itself to standby mode approximately ten GAME minutes after a TV station stops broadcasting. TIME FUNCTION LANGUAGE 1.
Page 20
Other functions SPECIAL MENU Sleep timer You don't have to remember to switch the set Off before you go to CHILD LOCK AUTO SLEEP sleep. The sleep timer automatically switches the set to standby BLUE BACK after the preset time elapses. Press the SLEEP button to select the number of minutes.
Page 21
Other functions SPECIAL MENU Time functions CHILD LOCK The time uses 12 hrs. system and must be set to the correct time AUTO SLEEP before operating the set. BLUE BACK 1. Press MENU to select special menu . key select time function. GAME TIME FUNCTION 3.
Connection of external equipment You can connect additional equipment, such as VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set. Aerial socket 1. Connect the RF out socket of the VCR to the aerial socket on the back of the set.
Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in picture Poor reception on some channels No colour Poor colour Remote control does not work Check following items and try to adjust these The mains plug-(plugged in and switched on)