Page 3
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Preface The DGS-3700 Series Hardware Installation Guide is divided into sections that describe the system installation and operating instructions with examples. Section 1, Introduction – Describes the Switch and its features.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Intended Readers The DGS-3700 Series Hardware Installation Guide contains information for setup and management of the Switch. This manual is intended for network managers familiar with network management concepts and terminology.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Safety Instructions Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage. Throughout this document, the caution icon ( ) is used to indicate cautions and precautions that you need to review and follow.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide • To help prevent electric shock, plug the system and peripheral power cables into properly grounded electrical outlets. These cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from a cable.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide CAUTION: Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.
Side Panel Description Gigabit Combo Ports The DGS-3700 Series are layer 2 Gigabit Ethernet switches and members of the D-Link Switch family. The following manual describes the installation, maintenance and configurations concerning the DGS-3700-12 and DGS-3700-12G switches. Please take note that if this device was purchased outside of Europe, certain cosmetic differences between the actual switch and images in this document will be apparent to the reader, such as the faceplate and the manual cover.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Switch Description The DGS-3700 Series is equipped with unshielded twisted-pair (UTP) cable ports providing dedicated 10 or 100 Mbps bandwidth. The DGS-3700-12 Switch has 12 UTP ports and Auto MDI-X/MDI-II convertible ports that can be used for uplinking to another switch.
One 10/100Base-Tx out of band management port One RJ-45 alarm port One RJ-45 alarm port The following table lists the features and compatibility for each type of port present on the DGS-3700 Series. 100/1000M dual speed SFP Ports 10/100/1000BASE-T Ports...
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide NOTE: The SFP combo ports on the Switch cannot be used simultaneously with the corresponding 1000BASE-T ports. If both ports are in use at the same time, the SFP ports will take priority over the combo ports and render the 1000BASE-T ports inoperable.
LED Indicators The Switch supports LED indicators for Power, Console, Management, Fan and Port LEDs. The following shows the LED indicators for the DGS-3700 Series along with an explanation of each indicator. LEDs and their corresponding meanings are displayed below.
Page 16
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide LED indicators for DGS-3700 Series Location LED Indicative Color Status Description Solid Light Power On Power Green Light off Power Off Solid Light Console on Console Green Blinking POST is in progress...
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Rear Panel Description The DGS-3700 Series rear panel is shown below. Figure 1- 5. Rear panel view of the DGS-3700 Series Side Panel Description The left hand panel of the Switch contains large heat vents. The heat vents are used to dissipate heat. Do not block these openings, and leave at least 6 inches of space at the rear and sides of the Switch for proper ventilation.
Page 18
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Figure 1- 8. Inserting the SFP modules into the DGS-3700-12G Figure 1- 9. Installing the SFP Module The AC power connector is a standard three-pronged connector that supports the power cord. Plug-in the female connector of the provided power cord into this socket, and the male side of the cord into a power outlet.
• RS-232 console cable If any item is found missing or damaged, please contact your local D-Link Reseller for replacement. Before You Connect to the Network The site where you install the Switch may greatly affect its performance. Please follow these guidelines for setting up the Switch.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Ventilation Requirements The figure below shows the ventilation requirements of the DGS-3700 Series. The sufficient spacing must be reserved at the ventilation openings to ensure the normal working of ventilation. After various cables have been connected, they should be arranged into bundles or placed on the cabling rack to avoid blocking the air inlets.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Installing the Switch in a Rack The Switch can be mounted in a standard 19" rack. Use the following diagrams to guide you. Figure 2- 3. Fasten mounting brackets to the Switch Fasten the mounting brackets to the Switch using the screws provided.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Installing/Removing the Dust Filter, Power or Fan Modules There are three modules available for the Switch, dust, power and fan modules. Power and fan modules have the handles for users to replace the modules easily. If installing or removing the power module, make sure to unplug the Switch before installing or removing the module.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Connecting DC Power to the DGS-3700 Series Follow the instructions below to connect the DC power supply of the Switch to the DC power source. Figure 2- 6. Power connections attached to contacts after assembly 1.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Section 3 Connecting the Switch Switch to End Node Switch to Hub or Switch Connecting To Network Backbone or Server NOTE: All high-performance NWay Ethernet ports can support both MDI-II and MDI-X connections.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Figure 3- 2. The Switch connected to a normal (non-Uplink) port on a hub or switch using a straight or crossover cable Connecting To Network Backbone or Server The SFP combo ports are ideal for linking to a network backbone or server. The copper ports operate at a speed of 1000, 100 or 10Mbps in full or half duplex mode.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Section 4 Introduction to Switch Management Management Options Web-based Management Interface SNMP-Based Management Connecting the Console Port (RS-232 DCE) First Time Connecting to the Switch Password Protection SNMP Settings...
Page 27
6. Enter the commands to complete your desired tasks. Many commands require administrator-level access privileges. Read the next section for more information on setting up user accounts. See the DGS-3700 Series CLI Manual on the documentation CD for a list of all commands and additional information on using the CLI.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide First Time Connecting to the Switch The Switch supports user-based security that can allow you to prevent unauthorized users from accessing the Switch or changing its settings. This section tells how to log onto the Switch.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide NOTE: Passwords are case sensitive. User names and passwords can be up to 15 characters in length. The sample below illustrates a successful creation of a new administrator-level account with the user name "newmanager".
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide messages may be encrypted. To read more about how to configure SNMP v.3 settings for the Switch read the section entitled Management. Traps Traps are messages that alert network personnel of events that occur on the Switch. The events can be as serious as a reboot (someone accidentally turned OFF the Switch), or less serious like a port status change.
Page 31
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide The IP address for the Switch must be set before it can be managed with the Web-based manager. The Switch IP address can be automatically set using BOOTP or DHCP protocols, in which case the actual address assigned to the Switch must be known.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Section 5 Web-based Switch Configuration Introduction Login to Web Manager Web-based User Interface Web Pages Introduction All software functions of the Switch can be managed, configured and monitored via the embedded web-based (HTML) interface.
Function Area 1 Select the folder or window to be displayed. The folder icons can be opened to display the hyperlinked window buttons and subfolders contained within them. Click the D-Link logo to go to the D-Link website. Area 2 Presents a graphical near real-time image of the front panel of the Switch.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Area 3 Presents switch information based on your selection and the entry of configuration data. NOTICE: Any changes made to the Switch configuration during the current session must be saved in the Save Changes web menu (explained below) or use the command line interface (CLI) command save.
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Appendix A Technical Specifications General IEEE 802.3 10BASE-T Ethernet Protocols IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3z Gibabit Ethernet. (SFP “Mini GBIC”) IEEE 802.1D/S/W Spanning Tree IEEE 802.1Q VLAN...
Page 36
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Physical and Environmental Revovable power module Internal Power Supply AC power Input: 100~240V, AC/1.5A(Max), 50~60Hz DC power Input: 48 V,DC/ 1.6A (Max) DC Output: 12V, 5A (Max) Max Power Consumption DGS-3700-12 –...
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Appendix B Cable Lengths Use the following table to as a guide for the maximum cable lengths. Standard Media Type Maximum Distance 1000BASE-LX, Single-mode fiber module 10km 1000BASE-SX, Multi-mode fiber module...
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide Appendix C Glossary 1000BASE-SX: A short laser wavelength on multimode fiber optic cable for a maximum length of 500 meters 1000BASE-LX: A long wavelength for a "long haul" fiber optic cable for a maximum length of 10 kilometers 1000BASE-T: 1000Mbps Ethernet implementation over Category 5E cable.
Page 39
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide half duplex: A system that allows packets to be transmitted and received, but not at the same time. Contrast with full duplex. IP address: Internet Protocol address. A unique identifier for a device attached to a network using TCP/IP. The address is written as four octets separated with full-stops (periods), and is made up of a network section, an optional subnet section and a host section.
Page 40
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide UDP - User Datagram Protocol: An Internet standard protocol that allows an application program on one device to send a datagram to an application program on another device. VLAN - Virtual LAN: A group of location- and topology-independent devices that communicate as if they are on a common physical LAN.
The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.
Page 42
D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright 2004 by D-Link Corporation/D-Link Systems, Inc.
Page 43
Product Registration Register your D-Link product online at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Page 44
You can find software updates and user documentation on the D- Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the service period, and warranty confirmation service, during the warranty period on this product.
Page 45
Technical Support United Kingdom (Mon-Fri) Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm) Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am – 05.30pm) (BT 10ppm, other carriers may vary.) Ireland (Mon-Fri) All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm) €0.05ppm peak, €0.045ppm off peak Times Internet http://www.dlink.co.uk...
Page 46
0.12 € TTC/min depuis un poste fixe Du lundi au vendredi de 9h à 19h (hors jours fériés) Asistencia Técnica Asistencia Técnica Telefónica de D-Link: +34 902 30 45 45 0,067 €/min De Lunes a Viernes de 9:00 a 19:00 http://www.dlink.es...
Page 47
Pomoc techniczna Telefoniczna pomoc techniczna firmy D-Link: 0 801 022 021 Pomoc techniczna firmy D-Link świadczona przez Internet: http://www.dlink.eu/support/ Technická podpora Web: http://www.dlink.cz/support/ E-mail: support@dlink.cz Telefon ČR: +420 211 151 640 nebo SK: +421 (0)692 147 110 Telefonická podpora je v provozu: PO - PÁ od 09:00 do 17:00 Volání...
Page 48
Internetin kautta : http://www.dlink.fi Arkisin klo. 9 - 21 Numerosta : 0600 155 57 Teknisk Support D-Link Teknisk Support via Internet: http://www.dlink.se D-Link Teknisk Support via telefon: 0900-100 77 00 Vardagar 08:00-20:00 Assistência Técnica Assistência Técnica da D-Link na Internet: http://www.dlink.pt e-mail: soporte@dlink.es...
Page 49
D-Link - ovo spletno stran www.dlink.eu www.dlink.biz/sl Suport tehnic Vă mulţumim pentru alegerea produselor D-Link. Pentru mai multe informaţii, suport şi manuale ale produselor vă rugăm să vizitaţi site-ul D-Link www.dlink.eu www.dlink.ro...
Page 50
Technical Support You can find software updates and user do cumentation on the D-Link website. Tech Support for customers in Australia: D-Link Middle East - Dubai, U.A.E. Tel: 1300-766-868 Plot No. S31102, 24/7 Technical Support Jebel Ali Free Zone South, Web: http://www.dlink.com.au...
Page 51
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Iran Israel Unit 5, 5th Floor, No. 20, 17th Alley , Bokharest המגשימים רח St. , Argentine Sq. , 49348 ת...
Page 52
Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка D-Link: +7(495) 744-00-99 Техническая поддержка через Интернет...
Page 53
SOPORTE TÉCNICO Usted puede encontrar actualizaciones de softwares o firmwares y documentación para usuarios a través de nuestro sitio www.dlinkla.com SOPORTE TÉCNICO PARA USUARIOS EN LATINO AMERICA Soporte técnico a través de los siguientes teléfonos de D-Link PAIS NUMERO Argentina...
Page 54
Suporte Técnico Caso tenha dúvidas na instalação do produto, entre em contato com o Suporte Técnico D-Link por: Chat Online www.dlink.com.br/suporte E-mail suporte@dlink.com.br Back Office backoffice@dlink.com.br *Acionar Garantia para 4 ou mais equipamentos Telefones São Paulo: (11) 2755-6950 *GO: 4052-1850 (Ligação local) *Nordeste: 0800-7024104 *Demais Estados: 4062-1850 (Ligação local)
Page 56
Dukungan Teknis Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Dukungan Teknis D-Link melalui telepon: Tel: +62-21-5731610 Dukungan Teknis D-Link melalui Internet: Email : support@dlink.co.id Website : http://support.dlink.co.id...
Page 57
Technical Support この度は弊社製品をお買い上げいただき、誠にありがとうご ざいます。 下記弊社 Web サイトからユーザ登録及び新製品登録を 行っていただき、ダウンロードサービスにて サポート情報、ファームウェア、ユーザマニュアルを ダウンロードすることができます。 ディーリンクジャパン Web サイト URL:http://www.dlink-jp.com...
Page 59
8. What category best describes your company? Aerospace Engineering Education Finance Hospital Legal Insurance/Real Estate Manufacturing Retail/Chain store/Wholesale Government Transportation/Utilities/Communication System house/company Other________________________________ 9. Would you recommend your D-Link product to a friend? Don't know yet 10.Your comments on this product? __________________________________________________________________________________________ __________________________________________________________________________________________...