Table of Contents
Advertisement
Setting Up the PG 720
2.2
Moving the Programming Device
Preparations
2
Carrying the
PG 720
2-6
The PG 720 is easy to carry. Before carrying it, however, you should take the
following measures:
1. Switch the PG 720 off and wait about 20 seconds until the drives have
come to a complete stop.
2. Unplug all the connecting cables.
3. Close the covers protecting the ports and connections on the right-hand
and left-hand side panels.
4. Bring the unit into an upright position.
5. Raise the keyboard and lock it by pressing it against the front panel of the
unit. The latches on the right and left snap in. Make sure that both catches
are properly locked.
6. If you only want to carry the unit for a short distance use the handle.
7. If you want to move the PG 720 over larger distances, pack the unit and
all its accessories in the carrying bag supplied.
Figure 2-6
PG 720 Ready for Carrying
Despite the rugged design of the PG 720, its internal components are
sensitive to severe vibration or jolts. When moving the PG 720 you must
therefore make sure that it is protected from severe mechanical forces.
Use the original packing material if you have to ship the PG 720 from one
location to another.
PG 720 Programming Device
C79000-G7076-C720-02
- Quick Links:
- Hardware Components of the
Hide quick links:
Advertisement
Table of Contents
