en Table of Contents Safety and warning information ... 3 Refrigerator compartment ....11 Information concerning disposal ..6 Super cooling ........12 Scope of delivery ........6 Interior fittings ........12 Installation location ........ 7 Sticker “OK” .......... 13 Ambient temperature and ventilation .
If damage has occurred enTable of Contentse n I n s t r u c t i o n f o r U s e Safety and warning Keep naked flames and/or ■ information ignition sources away from the appliance, Before you switch ON the thoroughly ventilate the room ■...
Page 4
Repairs may be performed by Do not use additional means ■ the manufacturer, customer to accelerate the defrosting service or a similarly qualified process other than those person only. recommended by the manufacturer. Risk of Only original parts supplied by explosion! the manufacturer may be used.
Page 5
Avoiding placing children Children in the household ■ and vulnerable people at Keep children away from ■ risk: packaging and its parts. At risk here are children, Danger of suffocation from people who have limited folding cartons and plastic physical, mental or sensory film! abilities, as well as people Do not allow children to play...
Warning Information concerning Redundant appliances disposal 1. Pull out the mains plug. 2. Cut off the power cord and discard * Disposal of packaging with the mains plug. The packaging protects your appliance 3. Do not take out the trays from damage during transit.
Note Installation location If the appliance is placed on its back, ensure that the wall spacer is not fitted. A dry, well ventilated room is suitable as an installation location. The installation location should not be exposed to direct Ambient temperature sunlight and not placed near a heat source, e.g.
The appliance complies with protection Connecting class I. Connect the appliance to 220– 240 V/50 Hz alternating current via a the appliance correctly installed socket with protective conductor. The socket must be protected After installing the appliance, wait at least by a 10 A to 16 A fuse.
Controls Getting to know your Fig. " appliance Temperature display refrigerator compartment The numbers correspond to the set refrigerator compartment temperatures in °C. “Super” button refrigerator compartment Switches super cooling on and off. Button “lock” function Please fold out the illustrated last page. If this function is switched on, no These operating instructions refer settings are possible via...
Switching Setting the appliance on the temperature Switch on the appliance with the On/Off Fig. " button, Fig. !/7. Refrigerator compartment The temperature display, Fig. "/1, indicates the selected temperature. The temperature can be set from +2 °C The appliance starts to cool, the light is to +8 °C.
To retain aroma, colour ■ Alarm function and freshness, pack or cover food well before placing in the appliance. This will prevent the transfer Door opening alarm of flavours and the discolouration of plastic parts in the refrigerator The door alarm switches on and the compartment.
Vegetable container with Super cooling humidity control Fig. * Super cooling sets the refrigerator To create the optimum storage climate temperature to the coldest temperature for fruit and vegetables, you can set setting for approx. 15 hours. Then the humidity level in the vegetable the appliance automatically switches container: to the temperature set prior to super...
Door shelf Sticker “OK” Fig. ' Lift shelf upwards and take out. (not all models) The sticker “OK” lets you check whether Variable shelf the refrigerator compartment achieves Fig. ( the safe temperature ranges of +4 °C or The shelf can be folded down if required: colder recommended for food.
Take out shelves in the door Cleaning the appliance Fig. ' Lift shelves upwards and take out. Taking out the upper vegetable Caution container Do not use abrasive, chloride or acidic Fig. - ■ cleaning agents or solvents. Pull out the vegetable container all Do not use scouring or abrasive ■...
Tips for saving energy Operating noises Install the appliance in a dry, well ■ Quite normal noises ventilated room! The appliance should not be installed in direct sunlight Droning Motors are running (e.g. refrigerating or near a heat source (e.g. radiator, units, fan).
Eliminating minor faults yourself Before you call customer service: Please check whether you can eliminate the fault yourself based on the following information. Customer service will charge you for advice – even if the appliance is still under guarantee! Fault Possible cause Remedial action Temperature differs greatly...
Fault Possible cause Remedial action Appliance is not cooling, Showroom mode is Hold down alarm button, Fig "/4, for temperature display and light switched on. 10 seconds until an acknowledgement signal are lit. sounds. After a short time check whether your appliance is cooling.