Table of Contents
Advertisement
English
3.
Color: Increase or decrease the color intensity of the image. The higher the value, the more vivid
and brighter the color.
4.
Tint: Adjusts the color tones of the image. The higher the value, the more greenish the picture
becomes. The lower the value, the more purplish the picture becomes.
5.
Filter: Turn the video and data filters on or off. Filters can reduce noise in the picture to produce
a sharper image. The higher the setting, the less the noise.
6.
Sharpness: Adjusts the picture sharpness. The higher the value, the sharper the picture.
7.
Extended Picture Setting
Color Temp: You can choose a preferred color temperature from among Lamp Native, Warm,
Middle, Cool, User 1, and User 2. Refer to
Temperature User 1 and 2.
Color Enhancement
Red: Adjusts red hues independently. The higher the setting, the greater the intensity of red
color in the image.
Green: Adjusts green hues independently. The higher the setting, the greater the intensity of
green color in the image.
Blue: Adjusts blue hues independently. The higher the setting, the greater the intensity of blue
color in the image.
Yellow: Adjusts yellow hues independently. The higher the setting, the greater the intensity of
yellow color in the image.
White: Adjusts white peaking.
8.
Save Settings: There are three video memories in which users can store settings, including all
of the items in the Picture menu. Each input source can store up to 3 sets of user memories.
To store the settings:
i.) Adjusts the items in the Picture menu to desired values.
ii.) Select Save Settings, press
iii.) Select To User's Memory 1, To User's Memory 2, or To User's Memory 3 and press
the settings.
iv.) To leave the OSD, press MENU.
9.
Load Settings: Loads the settings from one of three User Memories or the default settings,
Dynamic, Standard, Therter 1, or Theater 2.
Display menu
Use this menu to set the way that the projector displays the picture.
1.
Screen Size: There are a few aspect ratios that can be selected for different video signals.
p.22
2.
PIP: Selects a second input signal for displaying a second image.
3.
POP: Selects a second input signal for displaying a second image.
4.
PIP/POP Source Swap: Sets an active window from the two images in order to make any
adjustments for it.
5.
PC & Component YPbPr Tuning: The following settings are only available with a PC or DTV
RGB signal selected.
Frequency: Adjusts the frequency of the sampling clock that captures the input signal.
Phase: Adjusts the phase of the clock.
H. Pos.: Adjusts the horizontal position of the image.
V. Pos.: Adjusts the vertical position of the image.
for more information about storing the Color
p.28
.
to store
27
Menus
Advertisement
Table of Contents
