hit counter script

Saving A Zone And A Channel To A Button; Receiving And Responding To A Radio Call; Receiving And Responding To A Talkgroup Call - Motorola APX 8000H User Manual

Hide thumbs Also See for APX 8000H:
Table of Contents

Advertisement

MN004476A01-AE
Chapter 5: General Radio Operation
NOTICE: To change the programmed zone and channel, repeat this procedure.
Short press of the programmed softkey changes your current transmission to the zone and
channel programmed in this softkey.
5.3.2

Saving a Zone and a Channel to a Button

When and where to use: You can save the frequently used zone and channel to the programmable
buttons.
Procedure:
1 Toggle from your current zone and channel to the required zone and channel.
2 Press and hold the button you desire to program.
You hear a short, medium-pitched tone when the zone and channel is saved.
NOTICE:
Short press of the programmed button changes your current transmission to the zone and
channel programmed in this button.
5.4

Receiving and Responding to a Radio Call

Once you have selected the required channel and/or zone, you can proceed to receive and respond to
calls.
The radio shows different indicators based on the system the radio is configured.
The LED lights up solid red while the radio is transmitting.
In conventional mode, the LED lights up solid yellow when the radio is receiving a transmission.
In trunking mode, there is no LED indication when the radio receives a transmission.
If the radio is receiving a secure transmission, the LED blinks yellow.
5.4.1

Receiving and Responding to a Talkgroup Call

Prerequisites: To receive a call from a group of users, your radio must be configured as part of that
talkgroup.
When and where to use: When you receive a talkgroup call (while on the Home screen) the radio
displays the following depending on the system your radio is configured to:
For ASTRO Conventional system, the LED lights up solid yellow. The display shows the talkgroup
alias or ID, and the caller alias or ID.
For Trunking system, the display shows the caller alias or ID.
Procedure:
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
2 Press the PTT button to respond to the call.
The LED lights up solid red.
3 Release the PTT button to listen.
See also
Making a Talkgroup Call on page 46
44
for details on making a Talkgroup Call.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 6000 3Apx 6000li 32.5

Table of Contents

Save PDF