Page 1
Retain it for future reference. Record model number and serial number of the set. See the label attached on the bottom of the set and quote this information to your dealer when you require service. BN315-JD Model number Serial number OWNER’S MANUAL...
Page 2
DLP PROJECTOR DLP PROJECTOR FCC NOTICE • A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contents Contents Safety Instructions Special Menu Options ........4 Selecting Language ........22 Names of parts Using ARC Function........22 Main Body ............7 Flip horizontal Function........23 Connecting Part ..........7 Flip vertical Function ........23 Control Panel ..........8 Auto sleep Function ........23 Remote Control ..........9 Using Keystone Function ........24 Installing Batteries...........9 Using Blank Function ........24...
Safety Instructions Safety Instructions Please take note of the safety instructions to prevent any potential accident or misuse of the projector. ➟ Safety Instructions are given in two forms as detailed below. WARNING : The violation of this instruction may cause serious injuries and even death. NOTES : The violation of this instruction may cause light injuries or damage to the projector.
Page 5
Safety Instructions Power WARNING Do not use too many plugs on the Mains multi-outlet. It may result in overheating of the outlet and causes a fire hazard ! Power NOTES Never touch the power plug with Hold the plug firmly when unplug- Prevent dust collecting on the a wet hand ging.
Page 6
Safety Instructions Using WARNING Never touch the wall outlet when Do not drop the projector or allow Don’t look at laser beam directly as it can cause eye damage! there is leakage of gas, open the impact shock. windows and ventilate. This may cause mechanical failure or personal injury ! It can cause a fire or a burn by a...
Names of parts Names of parts Main Body * The projector is manufactured using high-precision technology. You may, however, see on the Projector screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the manufacturing process and does not always indicate a malfunction.
Names of parts Control Panel , KEYSTONE+/- Button MENU SOURCE KEYSTONE MENU Button SOURCE Button Selects or closes menus. Switches to RGB, HDMI, Video, S-Video, Compoment mode. Button Adjusts functions of menus. AUTO Button OK Button KEYSTONE AUTO Checks present mode and saves the change of functions.
Names of parts Remote Control POWER POWER Button MENU KEYSTONE SOURCE MENU Button SOURCE Button KEYSTONE+/-, Button Button AUTO Button (Refer to p.26) OK Button AUTO KEYSTONE ARC Button (Refer to p.22) BLANK Button (Refer to p.24) BLANK STILL Button (Refer to p.25) STILL Installing Batteries CAUTION...
Names of parts Projector Status Indicators * Lamp indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status of the projector. Lamp Indicator Temperature Indicator Operation Indicator Orange Standby. Green(flashing) Lamp is starting up. Operation Indicator Green Unit is in operation (Lamp is turned on)
Names of parts Accessories POWER MENU KEYSTONE SOURCE AUTO KEYSTONE BLANK STILL 1.5V Owner’s Manual 2 Batteries Remote Control Power Cord Video Cable Computer Cable Optional Extras * Contact your dealer to purchase these items. * When applying a ceiling installer, use only the ceiling installer for projector. * Contact your service personnel for replacing of lamp.
Installing and Composition Installing and Composition Installation Instructions * Don’t place the projector in the following conditions. It may cause malfunction or product damage. Provide proper ventilation for this projector. The projector is equipped with ventilation holes(intake) Do not place the projector on a carpet, rug or other on the bottom and ventilation holes(exhaust) on the front.
Installing and Composition Basic Operation of the Projector 1.Place the projector on a sturdy and horizontal surface with the PC or AV source. 2.Place the projector with the desired distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3.Position the projector so that the lens is set at a right angle to the screen.
Installing and Composition Using Kensington Security System G The projector has a ‘Kensington’ Security System Connector on the back panel. Connect the ‘Kensington’ Security System cable as below. G For the detailed installation and use of the Kensington Security System, refer to the user’s guide attached to the Kensington Security System set.
Installing and Composition Turning on the Projector 1. Connect power cord correctly. 2. Remove the lens cover of the projector. 3. Press the POWER button on the remote control or top cover. (Green operation indicator flashes if lamp is in start-up cycle.) G An image will appear after the operation indicator light turns (Green).
Installing and Composition Focus and Position of the Screen Image When an image appears on the screen, check if it is in focus and fits well to the screen. Zoom ring Focus ring To adjust the focus of the image, rotate the focus ring which is the outer ring on the lens. To adjust the size of the image, rotate the zoom ring which is the inner ring on the lens.
Connection Connection Connecting to a Desktop PC * You can connect the projector to a computer of VGA, SVGA, XGA and SXGA output. * You can use ARC function for the RGB signals of the Aspect Ratio 4:3. (For HD wide input signals, you cannot use ARC function.) * Fundamentally, HD wide input signal is not included in the Spec., so the set may not support HD signal perfectly.
Connection Connecting to a DVD * The output jacks (Y, P ) of the DVD might be labelled as Y, Pb, Pr / Y, B-Y, R-Y / Y, Cb, Cr according to the equipment. < How to connect > a. Connect the DVD Component cable to Component P Component cable of the projector.
Function Function * In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just an example to help with the Projector operation. * If there is no input signal present, the Menu will not be displayed. * This operating guide explains operation of RGB(PC) mode mainly.
Function Auto Color Temperature Control - To initialize values (reset to default settings), select the Normal option. 1. Press the MENU button and then use button to select the menu. D , E 2. Press the button and then use button to select item.
Function White peaking Function 1. Press the MENU button and then use button to select the menu. D , E 2. Press the button and then use button to select White peaking item. Gamma White peaking White peaking 5 3. Press the button to adjust the screen condition as you want.
Function Special Menu Options Selecting Language 1. Press the MENU button and then use button to select the menu. Language English Language D , E 2. Press the button and then use button to select Language item. Deutsch Flip horizontal Français Flip vertical Italiano...
Function Flip horizontal Function * This function reverses the projected image horizontally. Use this function when rear projecting an image. 1. Press the MENU button and then use button to select the menu. Language D , E 2. Press the button and then use button to select Flip horizontal...
Function Special Menu Options Using Keystone Function * Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape. * Only use the Keystone function when you can’t get the best angle of projection. 1.
Function Lamp mode Function 1. Press the MENU button and then use button to select the menu. Keystone Blank image D , E 2. Press the button and then use button to select Lamp mode item. Lamp mode Lamp mode Normal mode Lamp time Silent mode...
Function Screen Menu Options Auto Configure Function * This function assures you of getting the best video quality by automatically adjusting the horizontal size and synchronization of the image. * Auto Tracking function works in RGB PC input only. 1. Press the AUTO button. Image positioning and synchronization are automatically adjusted.
Function Using ZOOM Function 1. Press the MENU button and then use button to select the menu. Auto configure Manual configure D , E 2. Press the button and then use button to select item. Zoom +/- Zoom +/- Zoom +/- 100% Position 3.
- Never touch the lamp unit glass otherwise image quality may be compromised or lamp life maybe reduced. To obtain a replacement Lamp unit Lamp model number is on page 31. Check the lamp model and then purchase it from an LG Electronics Service Center. Using another manufacturers lamp may cause damage to the projector.
Page 30
Using another manufacturers lamp may cause damage to the projector or lamp. Make sure the lamp cover is securely fastened. If the lamp cover is not installed correctly the unit will not power on. If this fault persists contact an LG Authorized Service Center.