Explanation of symbols Permissible operating conditions / locations Technical data What is the B100R? Mounting the B100R Notes on the connection of the B100R connector Overview of the Rocker Switch and the Keys Using the B100R Switching on and off, screen explanation...
It is the responsibility The B100R can be used at temperatures between 10 °C and of the cyclist to check the pedelec as instructed, to have any +60 °C. IP67 protection means that this component is work done on it and to use it responsibly.
Since all important information is displayed on the high-contrast 1.4-inch monochrome LCD, a larger display Figure 3: Best viewing angle in the centre of the handlebar is not required - the B100R is a The display is designed with an optimum viewing angle of stand-alone system.
Display Figure 7: Rocker switches and keys The entire display of the B100R is a rocker switch. The display can be pressed at the top for the "+" function and at the bottom for the "-" function. In addition, there are three buttons for "On/Off", "Light"...
(TRP), range (R) or odometer (T) You can always press "+" and "-" on the rocker switch (chapter 6.5) (chapter 4) of the B100R to change the degree of motor assist level (chapter 6.7) assistance. This allows you to make optimum progress with speed (chapter 6.8)
Your bicycle dealer can perform firmware updates to the B100R. Such firmware updates are available at regular intervals - your dealer will be happy to advise you and keep you up to date. Please note that driving behavior can change easily after an update.