Lcd digital color tv, chassis name: rb2tp (43 pages)
Summary of Contents for Sony BRAVIA KDL-32FA600
Page 1
HISTORY INFORMATION FOR THE FOLLOWING MANUAL: SERVICE MANUAL SERVICE MANUAL AZ1-K Chassis ORIGINAL MANUAL ISSUE DATE: 2/2010 Version Date Subject 2/9/2010 No revisions or updates LCD Digital Color TV 9-883-847-01...
Page 2
Self Diagnosis Supported model SERVICE MANUAL AZ1-K Chassis LCD Digital Color TV 9-883-847-01...
Page 3
MODEL LIST MODEL COMMANDER DESTINATION MODEL COMMANDER DESTINATION KDL-32FA600 RM-YD035 KDL-32FA600 RM-YD035 LATIN AMERICA...
Laboratories. Blu-ray Disc is a trademark. “BRAVIA” and , Motionflow, BRAVIA Sync, and are trademarks or registered marks of Sony Corporation. “PlayStation” is a registered trademark and “PS3” is a trademark of Sony Computer Entertainment Inc. ® Your BRAVIA TV is ENERGY STAR qualified in the “Home”...
Page 6
SpEcIfIcATIONS Model name KDL- 32FA600 Power and others Power requirement 110-240 V AC, 50/60 Hz Power consumption 145 W in use in standby Less than 0.23 W with 120 V AC and with 240 V AC less than 0.4 W Screen size 80.0 (measured diagonally)
Components identified by shading and ! mark on the exploded views are critical for safe operation. Replace all components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. It is essential that all critical parts be replaced only with the part number specified in this manual to prevent electric shock, fire, or other hazard.
SAFETY-RELATED WARNING uSE Caution WHEn Handling tHE lCd panEl When repairing the LCD panel, be sure you are grounded by using a wrist band. When installing the LCD panel on a wall, the LCD panel must be secured using the 4 mounting holes on the rear cover. 1) Do not press on the panel or frame edge to avoid the risk of electric shock.
SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges. To Exposed Metal Parts on Set 2.
Page 10
SAfETy chEck-OUT lEakagE tESt The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA(500 microamperes). Leakage current can be measured by any one of three methods.
SELF DIAGNOSIS FUNCTIONS Self Diagnosis Supported model SElf diagnoSiS funCtion The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED will automatically begin to flash. The number of times the LED flashes translates to a probable source of the problem. A definition of the STANDBY LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
Page 12
SELf DIAGNOSIS fUNcTIONS StandBy lEd flaSH Count 2 times 5 times LED ON 0.3 sec. LED OFF Ambient Sensor/ Picture Off / Standby LED Power LED LED OFF 0.3 sec. 3 sec. (IR) Infrared Receiver Timer LED KDL-32FA600...
Page 13
SELf DIAGNOSIS fUNcTIONS ViEWing tHE SElf CHECk diagnoStiC liSt For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of a failure for confirmation on the Self Check diagnostic screen: 1.
Page 14
SELf DIAGNOSIS fUNcTIONS ClEaring tHE SElf CHECk diagnoStiC liSt Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen after you have completed the repairs to be sure you have cleared the result display to “0”. 1.
SPEAKER, SATTELITE (SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV) X-2547-016-1 STAND ASSEMBLY (M5) For product protection and safety reasons, Sony strongly recommends 4-165-641-01 COVER NECK(M5) that you use the screws provided with the TV CAUTION: These screws cannot be used to secure the TV to...
See Appendix A: Encryption Key Components in the back of this manual. Remove 1 screw from Side Jack position (Check the Sony Electronics Service Information website for any additional service related issues for this model.) Remove 1 screw from Terminal position...
See Appendix A: Encryption Key Components in the back of this manual. Disconnect 3 connectors from G2HE (Power) Board (Check the Sony Electronics Service Information website for any additional service related issues for this model.) Remove 2 PWB Spacers from G2HE (Power) Board...
See Appendix A: Encryption Key Components in the back of this manual. Wipe the LCD screen gently with a soft cloth. (Check the Sony Electronics Service Information website for any additional service related issues for this model.) → Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
DISASSEMBLy/pART NUMBER INfORMATION 1-7. ACCESSORIES AND PACKING 1-836-501-11 AC POWER SUPPLY CORD WITH CONN 4-175-731-11 GUIDE, QUICK SET UP 4-170-417-32 MANUAL, INSTRUCTION 4-175-276-11 SUPPLEMENT(STAND INSTALLATION) 1-8. mISCELLANEOUS X-2348-140-3 SUPPORT BELT KIT 1-9. REmOTE COmmANDER 1-487-827-11 REMOTE COMMANDER (RM-YD035) KDL-32FA600...
SEC 2. SERVICE ADjUSTMENTS 2-1. ACCESSING SERvICE ADJUSTmENT mODE Service Mode Sound Adjust… >> There are 2 modes that can be accessed for service. The Service mode screen is for informational purposes and will be covered in the Wide Band Tuning >>...
SERvIcE ADjUSTMENTS 2-1-2. ACCESSING FACTORy mODE Factory Mode Input Source <[ Video 1 ]> 1. TV must be in standby mode. (POWER off). Aging Mode <[ ]> 2. Press the following buttons on the Remote Commander Internal Pattern <[ ]> within a second of each other: EDID WP <[...