Gps Status; Compass Setup; Display Setup - Raymarine C-Series Reference Manual
Hide thumbs
Also See for C-Series:
- Reference manual (244 pages) ,
- Installation manual (64 pages) ,
- Operating manual (20 pages)
Table of Contents
Advertisement
Chapter 2: General Operation and System Setup
MENU ITEM
Deep Depth Alarm
Switches the deep depth alarm on or off.
If a DSM is not connected, this cannot be set.
Deep Depth Alarm Value
Deep Depth Alarm
If the
the depth exceeds the value that you specify.
GPS Status
This allows you to set up your GPS. For more information, see
Compass Setup
To linearize ('swing') your compass proceed as follows:
1. Select the Compass Setup sub-menu.
2. Press LINEARIZE COMPASS and follow the instructions displayed on screen. When
instructed to align heading , press the ALIGN HEADING soft key and then turn the
rotary control one click at a time to fine tune the heading.
Display Setup
MENU OPTION
Soft key Autohide
Controls whether the soft key bar is automatically hidden if
not used for a period of 10 seconds. Pressing any key re-
displays the soft key bar.
Cursor Autohide
Controls whether the cursor is automatically hidden if not
used for 10 seconds. Pressing any key re-displays the cursor.
Key beep
Controls whether a noise is made when you press a key.
Text size
Controls the size of the text on the screen
is set to ON, an alarm is triggered if
2-11
OPTION
(Default in bold)
OFF
ON
> 1 fathom
> 1m
> 2ft
3000 ft (DSM with 600W
transducer attached)
5000 ft (DSM with 1kW
transducer attached)
page 23
.
OPTIONS
(Default in bold)
OFF
ON
OFF
ON
OFF
ON
Small
Large
- Quick Links:
- Radar
- Setup Menu
Hide quick links:
Advertisement
Table of Contents
