Parts and features .AUNDRY TEMPERATURE 1-m.. ._.A., SELECTOR !-k&m Copy your Model and Serial Numbers When you need service or call with a question, have this information ready: 1. Complete Model Serial bers [from plate underthe lid nearthe hinge). 2. Purchase date from sales slip.
Lint Filter CARING FOR YOUR WASHER Winterizing IF YOU NEED SERVICE OR ASSISTANCE 1. Before Calling Assistance 2. If You Need Assistance 3. If You Need Service 4. If You Have a Problem 01984 Whirlpool Corporation -SAVE THESE INSTRUCTIONS...
Starting your washer Before starting your washer: Select a 1. LOAD SIZE Turn the knob to point at a setting that describes the size of load you want to wash. Set the knob anywhere on or be- tween EX SMALL (a few items) and LARGE (a full load).
Page 5
Start the washer Push in the Control Knob and turn it to the right. It must be pushed in and turned only clockwise. Start the washer by pulling the Control Knob. The washer will fill to the level you set with wash water of the selected temperature.
What happens in each cycle Each cycle has different agitation kinds of fabrics. Numbers on the dial in each agitation time. When the Cycle Control Knob is set to a number fills before agitation and timing REGULAR HEAVY Cycle High agitation spin speeds heavy water...
Page 7
clockwise until it points to OFF and the cycle NOTE:You may hear the sound some cycles. In some cycles, cold help with the rinsing. DRAIN Agltation DRAIN Agitation SOAK WASH SOAK Minutes Minutes Agitation Speed Special care is needed See your’laundry Guide”...
Other operating instructions For a rinse and spin You may need an extra rinse and spin for heavily soiled loads which need more detergent. (Extra de- tergent can require an extra rinse.] Push Control Knob in. Turn clockwise to any* on the dial.
Caring for your washer WHEN NOT WASHING, keep both water faucets turned off. This takes the pressure off the water inlet valve and hoses. REMOVE SHARP OBJECTS such as pins, buckles, etc., from clothes before washing. Close metal zippers. AFTER WASHING, use a soft dry cloth to wipe the outside and inside dry.
WINTERIZING Because some water stays in the washer, freez- ina can cause a lot of damaqe. stored or moved during the cold weather. 1. Shut off both water 2. Put a quart faucets. Discon- automobile-type nect and drain antifreeze water inlet hoses.
Water can siphon out. (See “ln- stallation Instructionsl’) 2. If you need assistance*. . . Call Whirlpool COOL-LINE” serv- ice assistance telephone number. Dial tree from: Continental U.S. . (800) 253-1301 Michigan .
Page 12
Home i A.App1iance.s Making your world a little easier Part No. 383172 Rev. A Printed in U.S.A. Gl984 Whirlpool Corporation...